A physics-first quadcopter laboratory: 1000Hz modeling, detailed real-world airframes from 2" to 13", a virtual workbench, a built-in flight controller, race tracks, and full flight record & replay — design, tune, and fly real drone builds before you touch hardware.

Abyste si mohli tento produkt přidat do seznamu přání, začít ho sledovat nebo ho zařadit mezi ignorované, musíte se nejprve přihlásit.

Hra s předběžným přístupem

Získejte okamžitý přístup, začněte hrát a zapojte se do vývoje této hry.

Poznámka: Hry s předběžným přístupem nejsou dokončené a během vývoje se mohou, ale nemusí změnit. Pokud Vás tedy tato hra nyní nezaujala, zkuste počkat, než se dostane do další fáze vývoje. Více informací zde

Zpráva od vývojářů:

Proč předběžný přístup?

„SITL Forge is built by drone pilots for drone pilots, and we'd rather ship it now and shape it together with the community than polish it in isolation. Early Access lets builders, FPV pilots, and flight-controller developers try the simulator against real hardware setups, tell us what's missing, and influence which platforms and features we prioritize next.“

Přibližně jak dlouho bude tato hra v předběžném přístupu?

„We plan to remain in Early Access for approximately 6–12 months. The exact length depends on how quickly we can act on community feedback, expand the parts library, and ship the next flight-controller integrations.“

Jak se bude plná verze lišit od předběžného přístupu?

„During Early Access we plan to grow the simulator along several axes:
• Additional flight-controller integrations as DLC — ArduPilot is planned alongside the existing Betaflight and iNAV support.
• A larger parts library: more frames, motors, propellers, batteries, and ESCs, with bench-validated specifications.
• Additional environments and test scenarios.
• Continued refinement of the VMG motor/propeller physics model based on real bench-test data.
• Quality-of-life improvements driven by community requests.

These are our intentions, not promises — final scope will depend on how Early Access unfolds.“

Co v tuto chvíli nabízí předběžný přístup?

„SITL Forge is fully playable today and includes:
• A built-in SIM flight controller (ACRO / ANGLE / HORIZON) for standalone simulation.
• Betaflight and iNAV DLC integrations for running real firmware in software-in-the-loop — Betaflight for flight tuning, iNAV for GPS navigation and waypoint missions.
• 1000 Hz Jolt physics with a power-balance VMG motor/propeller model.
• A drone workbench with part assembly, real-time thrust and current predictions, and joystick support.
• Detailed real-world airframes from a 2" micro to 13" heavy carriers.
• Race tracks with lap timing, practice and 3-lap race modes.
• Flight recording and full 3D replay.

The current build ships with one environment and a growing library of parts and race tracks, and may contain bugs and rough edges. We will be expanding content and fixing issues throughout Early Access.“

Změní se cena hry po skončení předběžného přístupu?

„We plan to gradually raise the price as the simulator grows — additional flight-controller integrations, an expanded parts library, and new environments will be reflected in the price during and after Early Access. Customers who purchase during Early Access keep their copy and do not pay the difference later.“

Jak plánujete do vývoje zapojit komunitu?

„We see Early Access as a working dialogue with our players. We plan to:
• Use the Steam Community Hub for feature requests, polls on what to build next, and bug reports.
• Publish regular changelogs that credit community-driven improvements.
• Engage directly with flight-controller developers and FPV builders who test real firmware against the simulator — their setups are the toughest test of physics fidelity.
• Share experimental builds for community review when meaningful changes land.“
Zjistit více
Čeština není podporována

Tento produkt nepodporuje Váš místní jazyk. Seznam podporovaných jazyků je k dispozici níže na této stránce.

Stáhnout SITL Forge - FPV Laboratory Demo

Zakoupit SITL Forge - FPV Laboratory

Zakoupit SITL Forge - Betaflight collection BALÍČEK (?)

Obsahuje následující položky (celkem 2): SITL Forge - FPV Laboratory, SITL Forge – External FC: Betaflight

Sleva 0 %. Původní cena činila $17.49, po slevě $17.49

Zakoupit SITL Forge - iNAV collection

Obsahuje následující položky (celkem 2): SITL Forge - FPV Laboratory, SITL Forge – External FC: iNAV

Sleva 0 %. Původní cena činila $17.49, po slevě $17.49
 

Pro nahlášení chyb či podání zpětné vazby navštivte diskuze k tomuto produktu

Zobrazit všechny diskuze

Informace o hře

SITL Forge is a physics-first FPV simulator. Motors, props and batteries are fitted to real bench data, physics runs at 1000 Hz, and every airframe is a real-world design — from a 2" micro to a 13" cinelifter. Fly it, race it, build it — or plug in real Betaflight and iNAV firmware.

Fly

  • Built-in Betaflight-style flight controller: ACRO, ANGLE, HORIZON, live PID and rate tuning
  • Race tracks with real-size gates and timed laps — practice or a 3-lap race
  • FPV camera with real lens distortion; any joystick or USB RC transmitter

Build

  • Swap frames, motors, props and packs in the workbench — weight, thrust, current and flight time recompute instantly
  • Detailed real-world airframes, 2" to 13", down to screws, cables and battery straps

Real physics

  • Motor losses, prop thrust and torque fitted to dyno data
  • Battery sag and heat, ESC limits, rotor inflow and ground effect, wind-tunnel drag

See everything

  • Live OSD and graphs for every variable — RPM, current, gyro, temperatures
  • Record and replay flights in 3D, export to CSV, import Betaflight and iNAV logs with the DLCs

Real firmware in 3 steps (optional DLC)

Swap the built-in controller for real Betaflight or iNAV running on your PC — same physics, real code.

Betaflight
  1. Build the SITL from Betaflight source: make SITL_X_PLANE
  2. Run betaflight_SITL_X_PLANE.elf
  3. In SITL Forge: External FC → Betaflight → Activate. Betaflight Configurator connects to ws://127.0.0.1:6761

iNAV
  1. Install iNAV Configurator — the SITL is already inside
  2. In SITL Forge: External FC → iNAV → Activate
  3. Run inav_SITL --sim=rf --simip=127.0.0.1 --chanmap M01-01,M02-02,M03-03,M04-04 — the one-time CLI setup is in the in-app guide

Systémové požadavky

Windows
SteamOS + Linux
    Minimální:
    • Vyžaduje 64bitový procesor a operační systém
    • OS: Windows 10 64-bit
    • Procesor: Intel Core i5-6400 / AMD Ryzen 3 1200 (4 cores)
    • Paměť: 4 GB RAM
    • Grafická karta: NVIDIA GTX 960 / AMD RX 560 (Vulkan 1.1 support required)
    • Pevný disk: 500 MB volného místa
    • Dodatečné poznámky: RC joystick is recommended
    Doporučené:
    • Vyžaduje 64bitový procesor a operační systém
    • OS: Windows 10/11 64-bit
    • Procesor: Intel Core i5-10400 / AMD Ryzen 5 3600 (6 cores)
    • Paměť: 8 GB RAM
    • Grafická karta: NVIDIA GTX 1660 / AMD RX 5600 XT
    • Dodatečné poznámky: RC joystick is recommended
    Minimální:
    • OS: Ubuntu 20.04+
    • Procesor: Intel Core i5-6400 / AMD Ryzen 3 1200 (4 cores)
    • Paměť: 4 GB RAM
    • Grafická karta: NVIDIA GTX 960 / AMD RX 560 (Vulkan 1.1 support required)
    • Pevný disk: 500 MB volného místa
    • Dodatečné poznámky: RC joystick is recommended
    Doporučené:
    • OS: Ubuntu 22.04+
    • Procesor: Intel Core i5-10400 / AMD Ryzen 5 3600 (6 cores)
    • Paměť: 8 GB RAM
    • Grafická karta: NVIDIA GTX 1660 / AMD RX 5600 XT
    • Dodatečné poznámky: RC joystick is recommended
Filtry recenzí