Rejoice, for v1.6 is here – with over 50 new parts, including graphics cards from Republic of Gamers, AORUS and ZOTAC, motherboards from AORUS and MSI, and cases from SilverStone, CORSAIR and Lian Li.


Open Benchtable's OBT-BC1 case is beautifully machined from solid aluminium, and features innovative features like screwless motherboard mounting, tool-less thumbscrews and a flat-folding design. This benchtable chassis is perfect for overclockers who are always swapping out parts, and also provides a different and striking look for builders who want to show off the beauty of their PC's internals.



To celebrate the festive season, we've decorated the original workshop with a cosy holiday theme, and added a jazzy seasonal track to the radio player. If it all gets too much, you can toggle back to the original theme via the xmas tree on top of the toolbox on your main desk.


You can now upload and share wallpapers to Steam workshop. Open the wallpaper app on any PC to check out this new functionality. Wallpapers at 16:9 aspect ratio will fit the in-game PC's desktop.

ASUS ROG Strix Geforce RTX Super Series (2060, 2070, 2080) (Graphics Card)


ZOTAC GAMING GeForce RTX 2080 Ti AMP Extreme (Graphics Card)


AORUS GeForce® RTX 2080 SUPER™ WATERFORCE WB 8G (Water Cooled Graphics Card)


ZOTAC GAMING GeForce RTX 2080 Ti ArcticStorm (Water Cooled Graphics Card)


SilverStone LD03 (Case)


Lian Li TU150 (Case)


GIGABYTE X570 AORUS XTREME (Motherboard)


GIGABYTE X570 AORUS MASTER (Motherboard)


MSI MEG Z390 ACE (Motherboard)


Silverstone PF360-ARGB (Liquid Cooler)


Patriot Viper Steel Series DDR4 (RAM)


ADATA Spectrix D60G (RAM)



(Career unlock level is in brackets after a part's name. All parts are available in Free Build instantly.)

Cases
Open Benchtable OBT-BC1 (9)
Silverstone RL08 (10)
Silverstone LD03 (10)
Lian Li TU150 (28)
CORSAIR Carbide Series 175R RGB Tempered Glass Mid-Tower ATX (21)

Case Fans
Mortoni RGB Fan (10)
Lian Li Bora Digital ARGB (15)

PSUs
Cooler Master V850 Gold (25)
Cooler Master MWE 700 Bronze V2 (22)
Cooler Master MWE 750 White V2 (22)
CORSAIR RM Series™ RM850 (21)
CORSAIR RMx Series™ RM650x (21)

Motherboards
GIGABYTE X570 AORUS MASTER (30)
GIGABYTE X570 AORUS XTREME (30)
MSI MEG Z390 ACE (26)
MSI MAG Z390 TOMAHAWK (26)
MSI MPG Z390 GAMING EDGE AC (26)

RAM
GIGABYTE Memory 8GB 2666MHz (14)
Patriot Viper Steel Series DDR4 (26)
ADATA Spectrix D60G (19)

Graphics Cards
GIGABYTE AORUS GeForce® RTX 2080 SUPER™ WATERFORCE WB 8G (29)
GIGABYTE AORUS GeForce® RTX 2080 SUPER™ 8G (28)
GIGABYTE GeForce® RTX 2070 SUPER™ GAMING OC WHITE 8G (28)
ZOTAC GAMING GeForce RTX 2080 Ti ArcticStorm (27)
ZOTAC GAMING GeForce RTX 2080 Ti AMP Extreme (27)
ZOTAC GAMING GeForce GTX 1660 Ti AMP (29)
ASUS ROG Strix GeForce® RTX 2060 SUPER series (28)
ASUS ROG Strix GeForce® RTX 2070 SUPER series (28)
ASUS ROG Strix GeForce® RTX 2080 SUPER series (28)

Storage
GIGABYTE UD PRO SSD (13)
GIGABYTE SSD (13)
GIGABYTE GIGABYTE M.2 PCIe SSD (22)
GIGABYTE AORUS NVMe Gen4 SSD (22)
GIGABYTE AORUS RGB M.2 NVMe SSD (22)
Patriot Viper VPR100 series (M.2 RGB PCIe Gen 3 x4SSD) (17)
Patriot Viper VP4100 series (M.2 PCIe Gen 4 x4 SSD) (17)
Patriot Viper VPN100 series (M.2 PCIe Gen 3 x4 SSD) (17)
ADATA Spectrix S40G RGB M.2 SSD (18)
CORSAIR MP600 Force Series Gen.4 PCIe MP600 NVMe M.2 SSD (20)

Liquid Cooler
SilverStone PF360-ARGB (25)
SilverStone PF240-ARGB (25)
SilverStone PF120-ARGB (25)

CPU
AMD Ryzen™ 9 3950X (30)

Mousemat
ADATA XPG Battleground XL Prime (20)

Monitor
ASUS ROG Swift PG279QE (26)

Keyboard
ADATA XPG Summoner (20)

Headset
ADATA XPG Precog (20)

SLI Bridges
ZOTAC GAMING NVLink Bridge (4 slot)
ZOTAC GAMING NVLink Bridge (3 slot)
ROG SLI Bridges

• Fixed – errors from the radio plugin if you play the game while being offline (not connected to the internet).
  
• Fixed – Razer Chroma functionality not working as expected.
  
• Fixed – Cases always appear as "used" in inventory.
  
• Fixed – Rare but game-breaking bug when turning off a PC.
  
• Fixed – Workshop selection screen - back button not functional at 1024 x 768 resolution.
  
• Fixed – Incorrect ranking of some CPUs in Parts Ranking

Happy Building and have a fabulous festive holiday :).
The PC Building Simulator Team

Hello PC Building Simulator fans!

The 2019 Steam Awards are now live and we would like to ask you to give PC Building Simulator one of your precious votes in the Labor of Love category.

The PC Building Simulator team have poured plenty of love into the game bringing multiple updates to the game this year and we would love for anyone that appreciates the game and these updates to show us via this simple vote if you feel inclined!

Happy voting no matter your choice of game in these awards.

- The PC Building Simulator Team

Hello PC Builders,

More treat than trick with our latest update, today we’re adding another 3 brand new partners to the game – plus some special Halloween decorations to our original workshop – to get you in the spooky mood!


ASRock has been high on the requested partner list for quite some time now, so we’re hugely pleased to be adding a wide range of their motherboards in this update – alongside a selection of their GPUs.



Colorful is one of the largest hardware manufacturers in China, and we’re excited to have a range of their GPUs and motherboards now available for use in the game.



HyperX is another much-requested partner to our line-up, and from this update you’ll be able to equip various new peripherals, RAM and even an RGB SSD!


To celebrate the spooky season of Halloween we’ve given the original workshop a suitably eerie set of decorations to get you into the spirit of things...

If you don’t feel in the mood for these decorations, you can toggle back to the original version via the pumpkin on top of the toolbox on your main desk.


HyperX Alloy FPS RGB & Pulsefire Surge (Keyboard & Mouse)


NZXT H510 Elite (Case)


HyperX FURY RGB (SSD)


ASRock Taichi Ultimate (Motherboard)


ASRock Z390 Phantom Gaming 9 (Motherboard)


ASRock Z390 Phantom Gaming ITX/ac (Motherboard)


Colorful iGame Z390 Vulcan X V20 (Motherboard)


AMD Radeon RX 5700 XT (GPU)


Colorful iGame GeForce RTX 2080 Ti Vulcan X OC (GPU)


ASRock Phantom Gaming X Radeon RX590 8G OC (GPU)



(Career unlock level is in brackets after a parts/features name, all parts are available in Free Build instantly)

• New Keyboard: ASUS ROG Strix Scope Deluxe (14), ASUS ROG Strix Flare (14) & HyperX Alloy FPS RGB (5).
  
• New Mouse: HyperX Pulsefire Surge (17).
  
• New Mouse Mats: HyperX FURY S Pro (16).
  
• New Headset: ASUS TUF Gaming H7 Wireless (12), ASUS ROG Delta (14) & HyperX Cloud Alpha Pro (2).
  
• New Cases: NZXT H210i (20), NZXT H510 Elite (20), NZXT H510i (20) & NZXT H710i (20).
  
• New GPU: AMD Radeon RX 5700 XT (26), AMD Radeon RX 5700 (26), Colorful iGame GeForce RTX 2080 Ti Vulcan X OC (28), Colorful iGame GeForce RTX 2080 Ti Advanced OC (28), ASRock Phantom Gaming X Radeon RX VEGA 56 8G (16), ASRock Phantom Gaming X Radeon RX590 8G OC (15), ASRock Phantom Gaming X Radeon RX580 8G OC (14), ASRock Phantom Gaming D Radeon RX580 8G OC (14) & ASRock Phantom Gaming Radeon RX560 4G (2).
  
• New CPUs: AMD Ryzen 5 Quad Core 3600 (30), AMD Ryzen 5 Quad Core 3600X (30), AMD Ryzen 7 Eight Core 3700X (30), AMD Ryzen 7 Eight Core 3800X (30) & AMD Ryzen 9 Twelve Core 3900X (30).
  
• New Motherboards: ASRock B450 Steel Legend (18), ASRock B450M Steel Legend (18), ASRock Z390 Phantom Gaming 6 (21), ASRock Z390 Phantom Gaming SLI/ac (20), ASRock Z390 Pro4 (20), ASRock Z390 Phantom Gaming ITX/ac (21), ASRock Z390 Extreme 4 (21), ASRock Z390 Phantom Gaming 4 (21), ASRock Z390 Taichi Ultimate (22), ASRock Z390 Taichi (22), ASRock Z390 Phantom Gaming 9 (21), ASRock Z390M Pro4 (22), ASRock Z390M-ITX/ac (22), Colorful CVN B365M GAMING PRO V20 (20), Colorful CVN Z390M GAMING PRO V20 (21) & Colorful iGame Z390 Vulcan X V20 (21).
  
• New SSD: HyperX FURY RGB (11).
  
• New RAM: HyperX Predator DDR4 (15).
  
• Halloween decorations have been added to the original workshop location, these can be toggled via the toys on the toolbox on your main workbench.
  
• Hard Mode now has its own autosave file.
  
• Fixed front panel cable being installed incorrectly on the SilverStone PS14 case when using the auto cable upgrade.
  
• Fixed the Antec K240 AIO Cooler not fitting in the NZXT H200 case.
  
• Fixed various small collision issues that could (in certain situations) block some parts from being added or removed.
  
• Fixed a bug that would cause negative FPS numbers to be displayed during 3DMark.
  
• Fixed an issue that could cause certain CPUs clock speed to display incorrectly in the bios.
  
• Adjusted rules for game specification jobs to stop unfair brand requests that might block completion.
  
• Fixed some issues with the FSP CMT340 case model that could cause large frame rate drops.
  
• Sometimes performance could drop when working on a PC and having Shop related applications open on your office PC, this should now be improved.
  
• Adjusted the model sizes of the NVIDIA GTX and RTX cards to bring them more in line with their real-world counterparts.
  
• Adjusted the model size of the GIGABYTE AORUS GeForce RTX 2080 Ti XTREME 11G to better match its real-world size.
  
• Fixed AIO Coolers clipping through the case in the CoolerMaster Masterbox 5 when placed in the rear slot.
  
• Fixed an issue where you could reinstall a drive bay on top of a 360mm radiator on the Lian Li LANCOOL ONE Digital case.
  
• Fixed the alignment issues of 140mm fans in the CORSAIR Crystal Series 280X case.
  
• Various cable route fixes.

We hope you enjoy all the new parts from new and existing partners available in this update and have a suitably spooky Halloween!

Happy Building!

The PC Building Simulator Team

Hello PC Builders,

PC Building Simulator has infiltrated some other platforms this month but we have also been working on a whole bunch of new things for the PC version that is now available in this update!

Firstly, however, we are very pleased to welcome 3 brand-new partners to the PC Building Simulator family:


Alphacool has been a staple request from players since we started including custom water cooling parts in the game, it is a pleasure to finally bring their product ranges to the game now and in the future.


FSP’s inclusion to the game means we now have some of their newest and most sought-after cases and PSUs included for you to build with.


Lian Li is another partner that has been hotly requested by players for a long time now, from today you will have the fantastic LANCOOL ONE Digital and O11 Dynamic to create your next builds in.



We have been working closely with ASUS to create a brand-new Republic of Gamers themed workshop that is now available to purchase. This new space is a must for any ROG fan!
https://store.steampowered.com/app/1067590/PC_Building_Simulator__Republic_of_Gamers_Workshop/


This is something that has been requested for a long time now and something we have really wanted to support for longer so it is great to finally provide players with the option to upload an image from their real-world PC to use on the desktop of their virtual one!




ASUS ROG Swift PG27UQ (Monitor) + ASUS TUF Gaming K7 (Keyboard) + ASUS ROG Gladius II Core (Mouse)


ASUS ROG Claymore (Keyboard) + ASUS ROG Spatha (Mouse)


Lian Li O11 Dynamic Designed by Razer (Case)


Lian Li LANCOOL ONE Digital (Case)


FSP CMT520 Plus (Case)


Alphacool Eisblock XPX (CPU Block)


GeForce RTX 2080Ti | Alphacool Eisblock GPX-N Plexi M02 (GPU)


Raijintek Antila D5 RBW (Reservoir)



(Career unlock level is in brackets after a parts/features name, all parts are available in Free Build instantly)

• New Monitors: ASUS ROG Swift PG27UQ (1).
  
• New Keyboard: ASUS ROG Claymore (16), ASUS TUF Gaming K7 (1) & ASUS TUF Gaming K5 (12).
  
• New Mouse: ASUS ROG Spatha (16) & ASUS ROG Gladius II Core (1).
  
• New Mouse Mats: ASUS TUF Gaming P3 (1), ASUS ROG Balteus Qi (10) & ASUS ROG Scabbard (1).
  
• New Headset: ASUS ROG Strix Fusion 700 (1).
  
• New Cases: Lian Li O11 Dynamic Designed by Razer (9), Lian Li LANCOOL ONE Digital (9), FSP CMT340 (14), FSP CMT520 Plus (14) & FSP CMT510 Plus (14).
  
• New GPU: NVIDIA RTX 2060 (22).
  
• New PSUs: FSP Hydro G (13), FSP Hydro PTM (8) & FSP DAGGER PRO (6).
  
• New Case Fans: FSP CMT510 (14) & FSP CMT520 (14).
  
• New CPU Blocks: Alphacool Eisblock XPX (18) and Alphacool Eisblock XPX Pro 1U (22).
  
• New Water Cooled GPUs: GeForce RTX 2080Ti | Alphacool Eisblock GPX-N Acetal M02 (27), GeForce GTX 1080 | Alphacool NexXxoS GPX M10 (23) & GeForce RTX 2080Ti | Alphacool Eisblock GPX-N Plexi M02 (27).
  
• New Radiators: Alphacool NexXxoS ST30 120, 240, 360, 140, 280 (19).
  
• New Reservoirs: Raijintek Antila D5 RBW (26), Alphacool Eisstation DC-Ultra (27), Alphacool Eisbecher DDC 150mm Acetal (27) & Alphacool Eisbecher D5 250mm Acetal (27).
  
• New Fittings: Alphacool Eiszapfen 13mm Fitting (18).
  
• Adjusted the Career mode balance changes made in v1.3.
  
  • The last round of adjustments made budgets a bit too generous which made things a bit easy, the previous adjustments have been reduced a bit in this update.
• Added the option to upload an image from your PC to use as your desktop image on your builds.
  
• Added support for larger reservoirs than what we originally had.
  
• Added new optional ASUS ROG workshop DLC.
  
• Fixed an issue that would block the Overvolted achievement from unlocking.
  
• Fixed an issue that would cause AIO Coolers to be removed from the GamerStorm Quadstellar case when removed from storage or a save was loaded.
  
• Fixed an issue that could cause additional customer parts to spawn in your inventory that you had no room to place back into the PC.
  
• Fixed the transition screen from How to Build a PC mode to the main menu.
  
• Fixed the position of radiators in the front of the CORSAIR 280X case.
  
• Fixed further cable combinations that had major clipping issues.
  
• Fixed various GPU and Motherboard alignment issues.
  
• Fixed the keyboards clipping their stands in the Razer Workshop.

We have been working hard to get even more new partners included, we can’t wait to unveil these new partners and add their hardware to the game in the future!

Happy Building,

The PC Building Simulator Team

Hello PC Builders,

This update lays the groundwork for further workstation customisation options by allowing you to swap the monitors used on the benches. With some cosmetic swaps in place now, we are working with partners to bring more screens, mice, keyboards etc. to the game in future updates.

Now when you reach level 30, you have the option to purchase these prestigious gold peripherals to celebrate your hard-earned experience level!



Along with new parts, this update also includes a whole host of bug fixes and some slight balance tweaks to the career mode.




To further increase workspace customization following the addition of peripherals in the last update we have now added the initial support for swapping monitors, starting with a selection of coloured DFL models to allow for some further coloured coordination to setups.
Now we have this support in place we will be working with current and new partners to widen the range of monitors available in the game in the future.





CORSAIR Obsidian Series 1000D (Case)


CORSAIR Obsidian Series 900D (Case)


CORSAIR Carbide Series SPEC-DELTA RGB (Case)


CORSAIR Crystal Series 280X RGB (Case)


AMD Radeon VII (GPU)


In Win Polaris RGB Aluminium (Case Fan)


Raijintek CWB-RGB (CPU Block)



(Career unlock level is in brackets after a parts/features name, all parts are available in Free Build instantly)

• New Monitors: DFL ExtraVision White Edition (5), DFL ExtraVision Blue Edition (5), DFL ExtraVision Pink Edition (8), DFL ExtraVision Silver Edition (15) & DFL ExtraVision Gold Edition (30).
  
• New Keyboard: Mortoni ComfortType Gold Edition (30).
  
• New Mouse: Mortoni SmoothPoint Gold Edition (30).
  
• New Cases: CORSAIR Crystal Series 280X RGB (26), CORSAIR Obsidian Series 900D (8), CORSAIR Carbide Series SPEC-DELTA RGB (26), CORSAIR Obsidian Series 1000D (8) & CORSAIR Carbide SPEC-06 RGB (28).
  
• New Motherboards: GIGABYTE B360 AORUS GAMING 3 (15), GIGABYTE B450 AORUS M (18), GIGABYTE B360M AORUS GAMING 3 (16) & GIGABYTE H370 AORUS GAMING 3 (16).
  
• New GPU: AMD Radeon VII (24).
  
• New CPU Coolers: Raijintek ORCUS 360 RBW (29), Raijintek ORCUS 280 RBW (29), Raijintek ORCUS 140 RBW (29) & Raijintek ORCUS 120 RBW (29).
  
• New Case Fans: Raijintek IRIS 14 RBW (10), In Win Sirius Loop ASL120 (24), In Win Polaris RGB Aluminium (24), In Win CROWN AC140 (24), In Win CROWN AC120 (24), Raijintek MACULA 12 RAINBOW RGB (12) & Raijintek SKLERA 12 RBW ADD (12).
  
• New CPU Blocks: Raijintek CWB-RGB (27) & Raijintek CWB-TR4 RBW (27).
  
• New Radiators: Raijintek CALORE C360D (27) & Raijintek CALORE C240D (27).
  
• New Fittings: Raijintek PELIAS RGB Fitting (27).
  
• Career mode balance changes:
  
• Rebalanced the parts budget in career jobs to give more freedom.
  
• Reduced the use of benchmarking in later career jobs.
  
• Added more variety to diagnose jobs.
  
• Added some extra desktop images to the wallpaper app.
  
• Allow swapping of monitors in the workshop.
  
• Added Credits button to the options menu.
  
• Fixed a bug that stopped the installation of GPUs in the Fractal Design Node 202 case.
  
• Fixed an issue that caused vertical GPU riser cables to be counted towards cable objectives - this could cause lower star results than expected.
  
• Fixed an issue where the GPU cable would not appear in the Thermaltake Core P5 when using an ITX motherboard.
  
• Fixed an issue that caused the EKWB EK-CoolStream SE 240 RGB & EKWB EK-CoolStream SE 360 RGB fans to be on regardless of if the PC was powered.
  
• Adjusted the model size for the Deepcool GAMMAXX C40 cooler so that it better reflects its real size and stops it clipping through the side panel on some cases.
  
• Fixed an issue that could block the PCI lock from closing on the Deepcool EARLKASE RGB WH case.
  
• Fixed GPU power cables routing in the Cooler Master MasterBox 5 to reduce clipping.
  
• Fixed the missing icons in the Pipe bending UI.
  
• Adjusted the maximum zoom out camera amount for better visibility on super tower cases.
  
• Improved cable routing in various cases to reduce the chances of clipping issues.
  
• Further improvements to the logic of various achievements to help with them unlocking correctly.
  
• Fixed incorrect game name in Irregular Corporation job line.
  
• Various string improvements in all localised languages.

Work is currently underway to bring new parts from multiple brand-new partners to the game, we are excited to be expanding the range of available hardware (PC and Peripheral) from various manufacturers you are always asking us to add! Stay tuned for more news on these :pcbs_case: :pcbs_motherboard: :pcbs_gpu:

Please also be aware that we will be soon disabling the old Career branch on Steam that contains a very out of date version of the career mode. If you are for some reason still using this old version please make plans to switch to the latest version to ensure you get all the latest updates to the game. This old legacy branch will be switched off in the coming weeks.

Happy Building,

The PC Building Simulator Team

Hello PC Builders,

The team has been busy making a lot of changes to PC Building Simulator in order to be able to add the ability to swap peripherals such as keyboards and mice along with improving other various bits and pieces (some more visible than others) to make the game a bit more polished.

Lot’s to get through, so let's get right to the update!




Support for swapping peripherals is now live! In this update, we are kicking off with a wide range of Razer products which you can use to further customise your workbenches with. The items you can swap are:

• Keyboards
  
• Mice
  
• Mouse Mats
  
• Headsets

Please Note: Large (extended) mouse mats and headsets are currently only available to swap on your main office desk.
With this support now complete, we will add new peripherals in future updates.



In order to enable the ability to swap more items on workbenches we had to make some major changes to the current environment we all know and love(??). So we decided this was a good opportunity to rebuild it to support these kinds of changes properly. The overall layout and design have been kept but various cosmetic and functional improvements have been made. For example, there is now an extra light switch near the door!





In addition to the remade workshop, we have collaborated with Razer to create a brand-new workshop themed around all things Razer. This new space brings a fresh, open layout for you to run your PC business in and once purchased you will be able to switch between either workshop as much as you like in either Career or Free Build modes.


https://store.steampowered.com/app/982590/PC_Building_Simulator__Razer_Workshop/



Owners of our existing Overclocked Edition DLC will now have access to two new case designs using new artwork designed by Brock Hofer:

NZXT H500 - Split


NZXT H700i - Organ Collector


https://store.steampowered.com/app/973910/PC_Building_Simulator__Overclocked_Edition_Content/


To celebrate the upcoming launch of two games being published by The Irregular Corporation we have created and release two new cases as Free DLC:

H700i - Deadstick

Download here: https://store.steampowered.com/app/982600/PC_Building_Simulator__Deadstick_Case/

H700i - Good Company

Download here: https://store.steampowered.com/app/823720/PC_Building_Simulator__Good_Company_Case/



Raijintek ENYO (Case)


MSI MPG Gungnir 100 (Case)


Antec Dark Avenger DA601 (Case)


In Win A1 (Case)


MSI MPG Z390 GAMING PRO CARBON (Motherboard)


Raijintek DELOS RBW (CPU Cooler)


Raijintek JUNO PRO RBW (CPU Cooler)


Razer Cynosa Chroma Pro (Keyboard), Razer Naga Trinity (Mouse) & Razer Firefly (Mouse Mat)


Razer Huntsman Elite (Keyboard), Razer Lancehead Tournament Edition (Mouse) & Goliathus - Fissure Edition (Mouse Mat)


Razer Huntsman (Keyboard), Razer Basilisk (Mouse) & Razer Goliathus Extended Chroma (Mouse Mat)



(Career unlock level is in brackets after a parts/features name, all parts available in Free Build right away)

• New Cases: In Win A1 (6), Antec Dark Avenger DA601 (6), Raijintek ENYO (30), CORSAIR Graphite Series 380T (23), MSI MPG Gungnir 100 (6), CORSAIR Obsidian Series 750D (8), Raijintek OPHION (28) and Raijintek OPHION EVO (28).
  
  • Overclocked Edition: Added NZXT H500 - Split (26) and NZXT H700i - Organ Collector (27).
    
  • Free DLC: H700i - Deadstick (27).
    
  • Free DLC: H700i - Good Company (27).
• New CPUs: Intel Core i7-9800X (29), Intel Core i9-9820X (29), Intel Core i9-9900X (29), Intel Core i9-9920X (29), Intel Core i9-9940X (29), Intel Core i9-9960X (29) and Intel Core i9-9980XE (29).
  
• New Motherboards: GIGABYTE B360N AORUS GAMING WIFI (16) and MSI MPG Z390 GAMING PRO CARBON (21).
  
• New PSU: Antec High Current Gamer 850W (27).
  
• New Air Coolers: Raijintek JUNO PRO RBW (10), Raijintek PALLAS 120 (10), Raijintek MYA RBW (10) and Raijintek DELOS RBW (10).
  
• New Case Fan: Antec Prizm 120 ARGB (30).
  
• New Keyboards: Razer Huntsman Elite (12), Razer BlackWidow Elite (10), Razer BlackWidow Lite (5), Razer Ornata Chroma (7), Razer Cynosa Chroma (5), Razer Cynosa Chroma Pro (7) and Razer Huntsman (9).
  
• New Mice: Razer Naga Trinity (12), Razer DeathAdder Essential (5), Razer DeathAdder Elite (7), Razer Basilisk (6), Razer Mamba Elite (11) and Razer Lancehead Tournament Edition (9).
  
• New Mouse Mats: Razer Firefly (10), Razer Invicta (12), Razer Goliathus Extended Chroma (9), Razer Goliathus (6) and Razer Destructor 2 (8).
  
• New Headsets: Razer Thresher (6), Razer Kraken Pro V2 (9) and Razer Nari Ultimate (11).
  
• Replaced old workshop scene with a new version to allow support for swapping peripherals.
  
• Added the ability to swap Keyboards, Mice, Mouse Mats and Headsets in both Career and Free Build modes.
  
  • Peripherals unlock in Career mode from level 5 onwards, there is a new shop app that can be purchased to order them.
• Added new shop to purchase peripherals from.
  
• Updated the environment used in How to Build a PC mode.
  
• Improved main menu environment.
  
• Added all new optional workshop available via DLC, themed and created in collaboration with Razer.
  
• Updated backgrounds on all parts shown in the Inventory and Shop UI.
  
• Improved the effect used to show where delivery slots are in a workshop.
  
• Fixed an issue that could cause cases to be marked as broken when purchased through PC Bay.
  
• Fixed the fan on the AMD Radeon Vega GPUs not being quite centred.
  
• Fixed reservoirs being blocked from installing on the NZXT S340 Elite case after removing the cable management bar.
  
• Fixed the SATA power and data cables being the wrong way around in How to Build a PC mode.
  
• Fixed PC Bay post-it note outlines remaining visible after an item has been collected.
  
• Fixed an issue that could cause monitor images to display over cases from some angles.
  
• Fixed an issue on the be quiet! Silent Base 601 that caused the PSU bracket to block removal of a PSU.
  
• Fixed the pink materials on the GIGABYTE Z370 AORUS Gaming 7 motherboard.
  
• Removed the rogue white space that appeared in all message box pop up UI boxes.
  
• Added a drop shadow to white UI text to help their visibility in some situations.
  
• Fixed missing Pipes label from key bindings screen.
  
• Various small UI tweaks and improvements.
  
• Various localisation fixes, these include both improved strings and fixes to overlaps. Work is continuing to improve this area of the game.

Alongside the continued work to add further PC parts, we will now be looking to expand available peripherals. We are also working on being to swap monitors to further add to the customisation options on your builds. If you have any favourite peripheral manufacturers you would like to see part of the game please do let us know in the comments!

As always, if you have any major issues with this update the fastest way to let us know is via our support email - support@theirregularcorp.com or via our Discord Server - https://discord.gg/pcbuildingsim and we will fix what we can as fast as reasonably possible.

Happy Building,

The PC Building Simulator Team

Hello PC Builders,

Some very annoying issues popped up in the previous update, so this update today is to squash a bunch of them. This is what is fixed in this patch:

• Fixed RGB lighting options being disabled in various cases.
  
• Fixed an issue that caused the UI to break when trying to purchase extra workbenches.
  
• Fixed an issue that would cause the piping UI to break after using the remove bend option.
  
• Fixed an issue that blocked you from disconnecting the cable on the Raijintek Ereboss CPU Cooler.
  
• Fixed an issue that would block installing a reservoir in the NZXT H700i when using the AORUS GeForce RTX 2080 Ti XTREME WATERFORCE WB 11G GPU.
  
• Added the missing front 140mm fan slot in the be quiet! Dark Base 700 case.

Happy Building,

The PC Building Simulator Team

Hello PC Builders,

This update for PC Building Simulator brings with it a brand new partner in the shape of the much requested be quiet!

Included in this version are a wide range of their excellent cases and cooling solutions which further expand the range of parts available in the game for you to build with.

In addition to these new parts (and others) we have also been squashing further bugs that have been reported over the last few weeks.




be quiet! Dark Base Pro 900 (Case)


be quiet! Silent Base 801 (Case)


be quiet! Dark Base 700 (Case)


be quiet! Silent Base 600 (Case)


be quiet! Shadow Rock 2 (CPU Cooler)


be quiet! Pure Rock (CPU Cooler)


be quiet! Dark Rock Pro 4 (CPU Cooler)


EVGA GeForce RTX 2080 Ti FTW3 ULTRA GAMING (GPU)


Gigabyte AORUS GeForce RTX 2080 Ti XTREME 11G (GPU)


Gigabyte AORUS GeForce RTX 2080 Ti XTREME WATERFORCE WB 11G (GPU)



(Career unlock level is in brackets after a parts/features name, all parts available in Free Build right away)

• New Cases: be quiet! Silent Base 600 (11), be quiet! Pure Base 600 (15), be quiet! Silent Base 601 (22), be quiet! Silent Base 801 (24), be quiet! Dark Base 700 (25), be quiet! Dark Base 900 (25) and be quiet! Dark Base Pro 900 (26).
  
• New GPUs: EVGA GeForce RTX 2070 FTW3 ULTRA GAMING (23), EVGA GeForce RTX 2080 FTW3 ULTRA GAMING (25), EVGA GeForce RTX 2080 Ti FTW3 ULTRA GAMING (27), Gigabyte AORUS GeForce RTX 2070 XTREME 8G (23), Gigabyte AORUS GeForce RTX 2080 XTREME 8G (25) and Gigabyte AORUS GeForce RTX 2080 Ti XTREME 11G (27).
  
• New Water Cooled GPU: Gigabyte AORUS GeForce RTX 2080 Ti XTREME WATERFORCE WB 11G (27).
  
• New Case Fans: be quiet! Pure Wings 2 120/140mm (27), be quiet! Shadow Wings 2 120/140mm (27) and be quiet! Silent Wings 3 120/140mm (27).
  
• New CPU Coolers (Air): be quiet! Shadow Rock 2 (23), be quiet! Shadow Rock Slim (23), be quiet! Shadow Rock TF 2 (23), be quiet! Shadow Rock LP (23), be quiet! Pure Rock (27), be quiet! Pure Rock Slim (27), be quiet! Dark Rock Pro TR4 (28), be quiet! Dark Rock Pro 4 (28), be quiet! Dark Rock TF (28) and be quiet! Dark Rock 4 (28).
  
• New CPU Coolers (AIO): be quiet! Silent Loop 120mm (30), be quiet! Silent Loop 240mm (30), be quiet! Silent Loop 280mm (30), be quiet! Silent Loop 360mm (30).
  
• Adjusted Hard Mode budgets and rewards to help make certain jobs actually possible now.
  
• Fixed an issue that caused the end payment for the spammer job line to not be paid.
  
• Increased the available budget in the Dynabeard job line.
  
• Improved detection for ‘Back in black’ achievement that stopped some players from unlocking it.
  
• Updated the Raijintek ZOFOS EVO case so that SSD drives can be installed.
  
• Fixed an issue in the Cooler Master COSMOS C700P that meant you couldn’t replace the rear panel is using an NZXT Kraken X72.
  
• Fixed an issue that would block reservoir installation in the NZXT H500 case.
  
• Fixed the sell prices for all water cooled GPUs.
  
• Fixed the case power cable not highlighting in the MasterCase Maker 5 MSI Dragon Edition case.
  
• Fixed the side panel not installing on the Antec P6 if Burst SSDs were installed behind the motherboard.
  
• Fixed the issue blocking vertical GPU installation in the Fractal Design Define R6 case.
  
• Fixed various Will it Run app game specifications being incorrect.
  
• Removed the model artefacts seen in the NZXT S340 Elite case when removing the cable management bar.
  
• Improved the rear case fan cable route in the Cooler Master MasterBox 5 case so that it no longer goes through the GPU.
  
• Improved component collision detection to help reduce PC’s being created that have parts blocking each other.
  
  • If you get a PC for a job that has parts you can’t remove due to them blocking each other please send the save game with the job active to us at support@theirregularcorp.com so that we can see the cause.
• Updated main menu PC with be quiet! Parts.
  
• Added be quiet! logo to the splash screen.

Work is now underway to add a feature that we get requested a lot, the ability to swap the mouse, keyboards and monitors used on the workbenches. Our original workshop environment was never designed to handle such a feature so as part of this implementation we are having to rebuild this environment which has added to the work quite a bit but it should be worth it to allow further workbench customization via swapping peripherals.



While this work is ongoing we are continuing to work to bring further new partners to the game in the future to further expand the range of parts available.

Happy Building,

The PC Building Simulator Team

Hello PC Builders,

There’s been a couple of small patches over the last week to fix a few of the more common issues you all have reported to us.

This is what we have been fixing:

• Fixed an issue that caused some save games from failing to load when advancing to the next day.
  
• Fixed an issue with non-modular PSU cables being counted towards cable objectives in jobs (this meant the objective would fail even though the player couldn't actually swap the cables).
  
• Fixed an issue with the top fan slots on the GamerStorm New ARK 90 where EKWB case fans would block each other incorrectly.
  
• Fixed the missing power button cable in the GamerStorm New ARK 90 case.
  
• Fixed an issue in the Fractal Design Meshify C where the reservoir would block the GPU even though it was nowhere near it.
  
• Made some improvements to try and stop PC’s being generated that have parts blocking each other.
  If you have a PC that currently has this issue, the job will need to be discarded as the fix will only work for newly generated PC’s after the update.

Thanks for all the save games and images everyone provided for the issues found - they really did help us get to the bottom of them much faster!

Thanks,

The PC Building Simulator Team

Hello PC Builders,

A very busy launch has highlighted various issues we wanted to fix as soon as we could so here is a small hotfix build that fixes the following issues:

• Fixed the maximum PSU length of the Thermaltake View 91 case.
  
• Fixed an issue with some top case fan and radiator slots being blocked by the dust filter on the Thermaltake View 91 case.
  
• Fixed being able to add/remove front case fan brackets while the fans are still in place on the Thermaltake View 91 case.
  
• Fixed the maximum GPU length allowed in the Thermaltake Core P5 cases.
  
• Fixed the wrong PCI slot screws being used when installing a GPU in the Thermaltake Core P5 case.
  
• Fixed 4 slot NVIDIA SLI bridges not appearing where they should.
  
• Fixed the Overclocked Edition cases appearing in the shop if you don’t own the DLC.
  
• Fixed an issue with the Raijintek Ereboss blocking RAM meaning neither can be removed.
  
• The generic SLI bridge will no longer appear on RTX GPUs when in a 2 slot configuration. NVIDIA NVlink bridges only support 3 & 4 slots configurations to no NVLink bridge will appear when two RTX cards are right next to each other.

We will continue to monitor any issues being reported and fixing them where we can in future patches.

Thanks!

The PC Building Simulator Team