모든 동영상 > Master Car Creation in Blender
커뮤니티 허브
Master Car Creation in Blender
All the secrets to creating an amazing car in Blender are packed into this step-by-step course. I’ll take you through every step of the creation process for creating a Corvette Stingray, including modeling, shading, rendering, and compositing.
모든 평가
사용자 평가 2개 - 점수를 표시하려면 사용자 평가가 더 필요합니다.
출시일:
2018년 11월 15일
프로덕션:
태그
이 제품의 인기 태그:
+

로그인하셔서 게임을 찜 목록에 추가하거나, 팔로우하거나 또는 제외하기로 표시하세요.

기능
언어:
원본 음성 지원 자막
한국어 지원하지 않음
영어 ✔ ✔ ✔
한국어(을)를 지원하지 않습니다

이 제품은 귀하의 로컬 언어를 지원하지 않습니다. 구매하기 전에 아래에 있는 지원하는 언어 목록을 확인해주세요.

주의: 배급사의 요청에 따라 Master Car Creation in Blender 게임이 Steam 상점의 목록에서 제외되었으며, 검색할 수 없습니다.
 

시리즈 콘텐츠

섹션 1
Section 2 - Modeling
Section 3 - Shaders and Lighting
Section 4 - Rendering
1. 1.01 - Introduction
챕터
1분
Overview of what the course will include.
2. 1.02 - User Preferences
챕터
2분
This chapter goes over a few important changes to the User Preferences before beginning the course.
3. 1.03 - Full Guide to the Guide Mesh
챕터
23분
One of the most important chapters in the whole course. This chapters contains all in the in's and out's of using the Guide Mesh techniques. This chapter can be used as a quick references when applying these techniques to your own projects.
4. 1.04 - Must See Chapters
챕터
2분
Just a list of the best chapters in the course. If you're using the course as a reference for your projects, make sure to still check out these chapters as they're among the coolest or most informative in the course.
5. 1.05 - Special Thanks
챕터
1분
Just a shout out to the awesome people that helped make this course happen.
1. 2.01 - Blueprints
챕터
6분
In this chapter we'll set up the car blueprints in Blender's background.
2. 2.02 - Hood Guide Mesh
챕터
32분
We'll start off modeling by making a clean guide mesh of the hood.
3. 2.03 - Front Fender Guide Mesh
챕터
47분
In this chapter we'll continue creating more of the guide mesh by working on the front fender.
4. 2.04 - Front Bumper Guide Mesh
챕터
65분
Now we'll finish off the front of the guide mesh by modeling the bumper area.
5. 2.05 - Tweaks
챕터
23분
Now that we've got a good portion of the guide mesh finished we'll tweak a few spots to make the surface smoother.
6. 2.06 - Hood Finish
챕터
31분
We'll take a break from the Guide Mesh and create the final version of the hood now with all of it's details.
7. 2.07 - Front Bumper Finish
챕터
38분
Now we'll finish off the front bumper panel as well.
8. 2.08 - Door Area Guide Mesh
챕터
21분
In this chapter we'll get back to work on the rest of the guide mesh, starting with the door area.
9. 2.09 - Back End Guide Mesh
챕터
46분
Now we'll move to the back end of the car and work on the guide mesh there.
10. 2.10 - Finishing the Guide Mesh - Part 1
챕터
43분
In this chapter we'll start finishing up what's left of the Guide Mesh
11. 2.11 - Finishing the Guide Mesh - Part 2
챕터
45분
Now we'll finish off the guide mesh in its entirety.
12. 2.12 - Front Fender Finish
챕터
53분
In this chapter we'll complete the front fender. We'll save finishing the vent area for later on when we actually make the vent.
13. 2.13 - Door Finish
챕터
13분
In this chapter we'll finalize the door panel.
14. 2.14 - Panel Under Door Finish
챕터
15분
Now we'll finalize the small panel underneath the door.
15. 2.15 - Back Fender Finish
챕터
44분
In this chapter we'll finish the back fenders including creating a gas cap for one side.
16. 2.16 - Trunk Area Finish
챕터
29분
Now we'll finalize the panel for the trunk. This chapter includes problem solving for several tricky parts of the car design where sharper creases blend into smooth curved surfaces.
17. 2.17 - Roof Finish
챕터
7분
In this chapter we'll finish both panels on the roof of the car.
18. 2.18 - Tail Finish
챕터
55분
In this chapter we'll finish up the panel on the tail end around the tail lights.
19. 2.19 - Front Windshield Frame
챕터
18분
Now we'll create the two bars on the sides of the front windshield.
20. 2.20 - Front Windshield
챕터
25분
In this chapter we'll make the front windshield as well as the area underneath it that houses the windshield wipers.
21. 2.21 - Back Windshield
챕터
13분
Now we'll create the back windshield.
22. 2.22 - Side Windows - Back
챕터
27분
I this chapter we'll start work on the side windows. We'll be creating the back side windows in this video as well as rubber stripping around it.
23. 2.23 - Side Windows - Front
챕터
26분
Now we'll work on the front side window as well as the strip at the base of it.
24. 2.24 - Window Borders
챕터
14분
In this chapter we'll work on the tinted borders around the front and back windshields.
25. 2.25 - Side View Mirrors
챕터
28분
In this chapter we'll create the side mirrors.
26. 2.26 - Front Grill
챕터
57분
In this chapter we'll work on the front grill. The front grill consists of border pieces and a diamond mesh for the actual grill. In this chapter we'll also be doing some trickery with the Data Transfer modifier in order to fake bevels between separate objects.
27. 2.27 - Hood Vent
챕터
38분
In this chapter we'll create the vent object for the middle of the hood. Again we'll be using the Data Transfer magic for connecting separate objects with bevels.
28. 2.28 - Front Fender Vent
챕터
36분
In this chapter we'll be finishing the vent area of the front fender as well as creating the vent for it too.
29. 2.29 - Shoulder Vent
챕터
32분
In this chapter we'll create the vent near the side windows.
30. 2.30 - Headlights - The Cover
챕터
14분
In this chapter we'll begin modeling the headlight area. We'll start things off making the cover for them.
31. 2.31 - Headlights - The Housing
챕터
22분
In this chapter we'll create the main housing object for all the components of the headlight.
32. 2.32 - Headlights - The Blinkers
챕터
27분
Now we'll create all the lamps for the blinkers along the side.
33. 2.33 - Headlights - Daytime Running Lights
챕터
22분
In this chapter we'll make the Daytime Running Lights also including the glass lens covering them.
34. 2.34 - Headlights - Main Light
챕터
15분
Now we'll create the components of the main light area.
35. 2.35 - Finishing the Headlights
챕터
16분
Now we'll be finishing anything left, including fitting the headlights perfectly into the socket cut from the car panels.
36. 2.36 - Tail Lights - The Frame
챕터
39분
In this chapter we'll be creating the frame around the tail lights.
37. 2.37 - Tail Lights - Main Lights
챕터
51분
In this chapter we'll create the lenses and interior components of the tail lights.
38. 2.38 - Tail Lights - Trunk
챕터
15분
In this chapter we'll work on the light bar on top of the trunk.
39. 2.39 - Back Bumper
챕터
45분
In this chapter we'll move on to creating the back bumper object.
40. 2.40 - Back Bumper Vents
챕터
14분
Now we'll create the vents that fit into both sides of the back bumper.
41. 2.41 - Mufflers
챕터
27분
In this chapter we'll create the mufflers and fit them into the bumper.
42. 2.42 - License Plate
챕터
6분
In this chapter we'll create a simple license plate for the back bumper.
43. 2.43 - Windshield Wipers
챕터
59분
In this chapter we'll create windshield wipers. We'll also fit them against the windshield using some lattice and shrinkwrap trickery.
44. 2.44 - Logos - Flags
챕터
20분
In this chapter we'll start on the logos. The first one we'll make is the flag logo which we'll also be UV unwrapping.
45. 2.45 - Logos - Corvette
챕터
7분
Now we'll create the "Corvette" text logo.
46. 2.46 - Logos - Stingray
챕터
19분
Now we'll create the chrome stingray logo on the sides of the car.
47. 2.47 - Wheel Wells and Mud Flaps
챕터
33분
In this chapter we'll create the wheel wells. Then we'll split pieces off from them to create separate mud flap type objects.
48. 2.48 - Side Reflectors
챕터
12분
In this chapter we'll create the bulbs and lenses for the side reflectors around the wheels.
49. 2.49 - Rims
챕터
54분
In this chapter we'll be creating the rims. Because it has a lot of symmetry we'll only have to make a portion of it and then we can mirror it around in a circle.
50. 2.50 - Rim - Corvette Logo
챕터
18분
In this chapter we'll create a small ledge on the rim that has the "Corvette" logo embossed in it.
51. 2.51 - Rim - Bolts
챕터
9분
In this chapter we'll finish off the rims by adding some bolts using the add-on Bolt Factory.
52. 2.52 - Rim - Air Stem
챕터
5분
In this chapter we'll finish up the rims by adding in some simple air stems.
53. 2.53 - Brake Discs
챕터
26분
In this chapter we'll create the brake discs.
54. 2.54 - Brake Calipers
챕터
42분
In this chapter we'll create the brake calipers around the brake discs.
55. 2.55 - Tires
챕터
53분
In this chapter we'll create the tires. We'll model a section of the treads, shape it, and then spin it around to form the full tire.
56. 2.56 - Shadow Planes
챕터
2분
Since the car is hollow behind the panels, we'll need to add planes inside and on the bottom to block the light from shining through the cracks of all the panels, making it look dark between the panels as if there are things inside.
57. 2.57 - More Tweaks
챕터
9분
Now that the exterior is complete we'll tweak a few things here and there to make it all perfect.
58. 2.58 - Simple Interior
챕터
3분
I've made a really simplistic interior just for the purpose of silhouettes through the tinted windows we'll have. I'll show you generally how it was made or how you can import these assets from the resources folder.
1. 3.01 - Shader Section Breakdown
챕터
2분
In this chapter I'll go over how the shader section should be followed.
2. 3.02 - Setting up the Lighting
챕터
3분
In this chapter we'll set up the HDRI environment that will be lighting our final renders.
3. 3.03 - All Basic Shaders - Part 1
챕터
16분
In this chapter we'll create basic shaders like rubber, plastic, various metals, a general interior shader, and a simple black diffuse shader.
4. 3.04 - All Basic Shaders - Part 2
챕터
11분
In this chapter we'll create basic shaders like various metals, various glass, and window borders.
5. 3.05 - Brake Disc Shader
챕터
8분
In this chapter we'll create the shader for the brake disc.
6. 3.06 - Car Paint - Red
챕터
34분
In this chapter we'll create the main car paint shader we'll be using for both red and black car paint.
7. 3.07 - Car Paint - Black
챕터
4분
Now we'll tweak the red car paint node group and create a black paint material we'll use for things like the vent plastics.
8. 3.08 - Tire Shader
챕터
30분
In this chapter we'll create the shader for the tire, including UV mapping a normal map for the details on the side of the tire.
9. 3.09 - Flag Logo Shader
챕터
5분
In this chapter we'll create the shader for the flag logos that we UV unwrapped in an earlier chapter.
10. 3.10 - Lens Shaders - Part 1
챕터
10분
In this chapter we'll create glass materials for the side light lens, trunk light lens, and the bumper reflector.
11. 3.11 - Lens Shaders - Part 2
챕터
18분
In this chapter we'll create shaders for the tail light lenses and the headlight lenses.
1. 4.01 - Studio Render
챕터
26분
In this chapter we'll set up the ground plane for our render and adjust all necessary settings to achieve the final studio render look. We'll also be adding in compositing nodes to post process the final render.
2. 4.02 - Bonus - Improved Studio Render (NEW)
챕터
8분
In this chapter we'll take everything we made in the previous chapter and tweak some settings to produce better results and to make the studio setup easier to use.
3. 4.03 - Bonus - Warehouse Render (NEW)
챕터
5분
Now we'll take what we made in chapter 1 of this section and set things up for close-up renders that have the background HDRI visible for some extra realism.
init_data: 0.2147, render: 0.1394

평가

“The course is top-notch quality in every single aspect: Chris not only shows how to do things, he also explains all the reasoning behind every modeling decision, so you’ll be able to “understand” and learn the concepts, not just replicate the different steps.”
Car Body Design

Steam 동영상

이 동영상은 온라인 스트리밍 방식으로만 시청할 수 있습니다. 스트리밍 동영상에 관한 정보는 Steam 스트리밍 동영상 관련 자주 묻는 질문에서 확인할 수 있습니다.

시리즈 정보

Overview

All the secrets to creating an amazing car in Blender are packed into this step-by-step course. Over 15 years of experience and 6 months of development bring you a Blender training course like no other. I’ll take you through every step of the creation process for creating a Corvette Stingray, including modeling, shading, rendering, and compositing. You’ll learn all the techniques you need to know to create flawless surfaces and impressive renders.

Get Perfect Curves with Advanced Modeling Techniques

The biggest hassle of subsurf modeling is dealing with adding details to curved surfaces and having that additional topology ruin your smooth surfaces. In this course I’ll show you methods that bypass that problem entirely so you can maintain your perfect curves without any hassle. Not only are the results perfect, but the workflow is actually fun and much faster when you don’t have to worry about every detail affecting your surfaces. Plus one of the best benefits is total and care-free control over the resulting topology of your model.

Advanced Modifier Usage for Efficiency and Awesomeness

Modifiers are so insanely powerful, and can be combined in so many ways to achieve really complex tasks. In this course you’ll learn a ton of different and unique ways to use modifiers. From general complex modeling tasks, to other things like instantly getting your windshield wipers flush against the windshield surface, we’ll be using modifiers to make our lives easier in making just about everything.

Shading and Rendering

I’ll be showing you how to create your own customize-able car paint including metallic flakes and orange peel, and all other shaders necessary for the final renders. Then we’ll be setting up an environment to get the right lighting and reflections, and setting up some compositing nodes for a little post processing.

Keep in Touch!

This is an intermediate difficulty course so as long as you have some experience with blender you should be able to follow along fine. But if you need any help going through the project you can get in touch with me. Or even if you just want to share your progress or chat about the techniques!

시스템 요구 사항

Windows
macOS
SteamOS + Linux
    최소:
    • 운영 체제 *: Windows 7
    • 프로세서: Intel Core 2 또는 동급의 AMD 제품
    • 메모리: 1 GB RAM
    • 네트워크: 초고속 인터넷 연결
    • 저장공간: 200 MB 사용 가능 공간
    • 추가 사항: 540p와 360p는 각각 5Mbps와 3Mbps의 대역폭을 필요로 합니다.
    권장:
    • 운영 체제: Windows 10
    • 프로세서: HD 1080p 재생을 위해서는 Intel Core i3 이상 또는 동급의 AMD 제품을 권장합니다.
    • 메모리: 2 GB RAM
    • 네트워크: 초고속 인터넷 연결
    • 저장공간: 500 MB 사용 가능 공간
    • 추가 사항: 1080p와 720p는 각각 12Mbps와 8Mbps의 대역폭을 필요로 합니다.
* 2024년 1월 1일부터 Steam 클라이언트는 Windows 10 이상 버전만 지원합니다.
    최소:
    • 운영 체제: Mac OSX 10.7
    • 프로세서: Intel Core 2 또는 동급의 AMD 제품
    • 메모리: 1 GB RAM
    • 네트워크: 초고속 인터넷 연결
    • 저장공간: 200 MB 사용 가능 공간
    • 추가 사항: 540p와 360p는 각각 5Mbps와 3Mbps의 대역폭을 필요로 합니다.
    권장:
    • 운영 체제: Mac OSX 10.10+
    • 프로세서: HD 1080p 재생을 위해서는 Intel Core i3 이상 또는 동급의 AMD 제품을 권장합니다.
    • 메모리: 2 GB RAM
    • 네트워크: 초고속 인터넷 연결
    • 저장공간: 500 MB 사용 가능 공간
    • 추가 사항: 1080p와 720p는 각각 12Mbps와 8Mbps의 대역폭을 필요로 합니다.
* 2024년 2월 15일부터 Steam 클라이언트는 더 이상 32비트 게임이나 macOS 10.14 이하를 지원하지 않습니다.
    최소:
    • 운영 체제: Linux Ubuntu 12.04 이상, SteamOS 2.20 이상
    • 프로세서: Intel Core 2 또는 동급의 AMD 제품
    • 메모리: 1 GB RAM
    • 네트워크: 초고속 인터넷 연결
    • 저장공간: 200 MB 사용 가능 공간
    • 추가 사항: 540p와 360p는 각각 5Mbps와 3Mbps의 대역폭을 필요로 합니다.
    권장:
    • 운영 체제: Linux Ubuntu 12.04 이상, SteamOS 2.20 이상
    • 프로세서: HD 1080p 재생을 위해서는 Intel Core i3 이상 또는 동급의 AMD 제품을 권장합니다.
    • 메모리: 2 GB RAM
    • 네트워크: 초고속 인터넷 연결
    • 저장공간: 500 MB 사용 가능 공간
    • 추가 사항: 1080p와 720p는 각각 12Mbps와 8Mbps의 대역폭을 필요로 합니다.

고객 평가

평가 유형


구매 형식


언어


설정하기
날짜 범위
특정 날짜 범위에 속하는 평가를 보려면, 위의 그래프에서 선택 항목을 클릭한 후 드래그하거나 원하는 바를 클릭하세요.

그래프 보기



플레이 시간
평가를 작성한 시점의 사용자 플레이 시간을 기준으로 평가를 필터링:


최소 시간 없음 ~ 최대 시간 없음
검색 조건:
그래프 보기
 
 그래프 숨기기
 
필터
주제에서 벗어난 평가 활동 제외
플레이 시간:
위에서 설정한 필터 조건에 맞는 평가가 없습니다
다른 평가를 보려면 위에서 필터를 조정해주세요
평가 불러오는 중...