所有影片 > Master Car Creation in Blender
社群中心
Master Car Creation in Blender
All the secrets to creating an amazing car in Blender are packed into this step-by-step course. I’ll take you through every step of the creation process for creating a Corvette Stingray, including modeling, shading, rendering, and compositing.
所有評論：
2 篇使用者評論 - 使用者評論數量不足，無法產生整體評價
發行日期:
2018 年 11 月 15 日
製作:
標籤
使用者為此產品所選用的熱門標籤：
+

登入以將此項目新增至您的願望清單、關注它，或標記為已忽略

功能
語言:
原始 完整語音 字幕
繁體中文 不支援
英文 ✔ ✔ ✔
不支援繁體中文

本產品尚不支援您的目前所在地的語言。購買前請先確認語言支援清單。

注意: 應發行商要求，Master Car Creation in Blender 已從 Steam 商店下架，且無法被搜尋到。
 

影集內容

章節 1
Section 2 - Modeling
Section 3 - Shaders and Lighting
Section 4 - Rendering
1. 1.01 - Introduction
章節
1 分鐘
Overview of what the course will include.
2. 1.02 - User Preferences
章節
2 分鐘
This chapter goes over a few important changes to the User Preferences before beginning the course.
3. 1.03 - Full Guide to the Guide Mesh
章節
23 分鐘
One of the most important chapters in the whole course. This chapters contains all in the in's and out's of using the Guide Mesh techniques. This chapter can be used as a quick references when applying these techniques to your own projects.
4. 1.04 - Must See Chapters
章節
2 分鐘
Just a list of the best chapters in the course. If you're using the course as a reference for your projects, make sure to still check out these chapters as they're among the coolest or most informative in the course.
5. 1.05 - Special Thanks
章節
1 分鐘
Just a shout out to the awesome people that helped make this course happen.
1. 2.01 - Blueprints
章節
6 分鐘
In this chapter we'll set up the car blueprints in Blender's background.
2. 2.02 - Hood Guide Mesh
章節
32 分鐘
We'll start off modeling by making a clean guide mesh of the hood.
3. 2.03 - Front Fender Guide Mesh
章節
47 分鐘
In this chapter we'll continue creating more of the guide mesh by working on the front fender.
4. 2.04 - Front Bumper Guide Mesh
章節
65 分鐘
Now we'll finish off the front of the guide mesh by modeling the bumper area.
5. 2.05 - Tweaks
章節
23 分鐘
Now that we've got a good portion of the guide mesh finished we'll tweak a few spots to make the surface smoother.
6. 2.06 - Hood Finish
章節
31 分鐘
We'll take a break from the Guide Mesh and create the final version of the hood now with all of it's details.
7. 2.07 - Front Bumper Finish
章節
38 分鐘
Now we'll finish off the front bumper panel as well.
8. 2.08 - Door Area Guide Mesh
章節
21 分鐘
In this chapter we'll get back to work on the rest of the guide mesh, starting with the door area.
9. 2.09 - Back End Guide Mesh
章節
46 分鐘
Now we'll move to the back end of the car and work on the guide mesh there.
10. 2.10 - Finishing the Guide Mesh - Part 1
章節
43 分鐘
In this chapter we'll start finishing up what's left of the Guide Mesh
11. 2.11 - Finishing the Guide Mesh - Part 2
章節
45 分鐘
Now we'll finish off the guide mesh in its entirety.
12. 2.12 - Front Fender Finish
章節
53 分鐘
In this chapter we'll complete the front fender. We'll save finishing the vent area for later on when we actually make the vent.
13. 2.13 - Door Finish
章節
13 分鐘
In this chapter we'll finalize the door panel.
14. 2.14 - Panel Under Door Finish
章節
15 分鐘
Now we'll finalize the small panel underneath the door.
15. 2.15 - Back Fender Finish
章節
44 分鐘
In this chapter we'll finish the back fenders including creating a gas cap for one side.
16. 2.16 - Trunk Area Finish
章節
29 分鐘
Now we'll finalize the panel for the trunk. This chapter includes problem solving for several tricky parts of the car design where sharper creases blend into smooth curved surfaces.
17. 2.17 - Roof Finish
章節
7 分鐘
In this chapter we'll finish both panels on the roof of the car.
18. 2.18 - Tail Finish
章節
55 分鐘
In this chapter we'll finish up the panel on the tail end around the tail lights.
19. 2.19 - Front Windshield Frame
章節
18 分鐘
Now we'll create the two bars on the sides of the front windshield.
20. 2.20 - Front Windshield
章節
25 分鐘
In this chapter we'll make the front windshield as well as the area underneath it that houses the windshield wipers.
21. 2.21 - Back Windshield
章節
13 分鐘
Now we'll create the back windshield.
22. 2.22 - Side Windows - Back
章節
27 分鐘
I this chapter we'll start work on the side windows. We'll be creating the back side windows in this video as well as rubber stripping around it.
23. 2.23 - Side Windows - Front
章節
26 分鐘
Now we'll work on the front side window as well as the strip at the base of it.
24. 2.24 - Window Borders
章節
14 分鐘
In this chapter we'll work on the tinted borders around the front and back windshields.
25. 2.25 - Side View Mirrors
章節
28 分鐘
In this chapter we'll create the side mirrors.
26. 2.26 - Front Grill
章節
57 分鐘
In this chapter we'll work on the front grill. The front grill consists of border pieces and a diamond mesh for the actual grill. In this chapter we'll also be doing some trickery with the Data Transfer modifier in order to fake bevels between separate objects.
27. 2.27 - Hood Vent
章節
38 分鐘
In this chapter we'll create the vent object for the middle of the hood. Again we'll be using the Data Transfer magic for connecting separate objects with bevels.
28. 2.28 - Front Fender Vent
章節
36 分鐘
In this chapter we'll be finishing the vent area of the front fender as well as creating the vent for it too.
29. 2.29 - Shoulder Vent
章節
32 分鐘
In this chapter we'll create the vent near the side windows.
30. 2.30 - Headlights - The Cover
章節
14 分鐘
In this chapter we'll begin modeling the headlight area. We'll start things off making the cover for them.
31. 2.31 - Headlights - The Housing
章節
22 分鐘
In this chapter we'll create the main housing object for all the components of the headlight.
32. 2.32 - Headlights - The Blinkers
章節
27 分鐘
Now we'll create all the lamps for the blinkers along the side.
33. 2.33 - Headlights - Daytime Running Lights
章節
22 分鐘
In this chapter we'll make the Daytime Running Lights also including the glass lens covering them.
34. 2.34 - Headlights - Main Light
章節
15 分鐘
Now we'll create the components of the main light area.
35. 2.35 - Finishing the Headlights
章節
16 分鐘
Now we'll be finishing anything left, including fitting the headlights perfectly into the socket cut from the car panels.
36. 2.36 - Tail Lights - The Frame
章節
39 分鐘
In this chapter we'll be creating the frame around the tail lights.
37. 2.37 - Tail Lights - Main Lights
章節
51 分鐘
In this chapter we'll create the lenses and interior components of the tail lights.
38. 2.38 - Tail Lights - Trunk
章節
15 分鐘
In this chapter we'll work on the light bar on top of the trunk.
39. 2.39 - Back Bumper
章節
45 分鐘
In this chapter we'll move on to creating the back bumper object.
40. 2.40 - Back Bumper Vents
章節
14 分鐘
Now we'll create the vents that fit into both sides of the back bumper.
41. 2.41 - Mufflers
章節
27 分鐘
In this chapter we'll create the mufflers and fit them into the bumper.
42. 2.42 - License Plate
章節
6 分鐘
In this chapter we'll create a simple license plate for the back bumper.
43. 2.43 - Windshield Wipers
章節
59 分鐘
In this chapter we'll create windshield wipers. We'll also fit them against the windshield using some lattice and shrinkwrap trickery.
44. 2.44 - Logos - Flags
章節
20 分鐘
In this chapter we'll start on the logos. The first one we'll make is the flag logo which we'll also be UV unwrapping.
45. 2.45 - Logos - Corvette
章節
7 分鐘
Now we'll create the "Corvette" text logo.
46. 2.46 - Logos - Stingray
章節
19 分鐘
Now we'll create the chrome stingray logo on the sides of the car.
47. 2.47 - Wheel Wells and Mud Flaps
章節
33 分鐘
In this chapter we'll create the wheel wells. Then we'll split pieces off from them to create separate mud flap type objects.
48. 2.48 - Side Reflectors
章節
12 分鐘
In this chapter we'll create the bulbs and lenses for the side reflectors around the wheels.
49. 2.49 - Rims
章節
54 分鐘
In this chapter we'll be creating the rims. Because it has a lot of symmetry we'll only have to make a portion of it and then we can mirror it around in a circle.
50. 2.50 - Rim - Corvette Logo
章節
18 分鐘
In this chapter we'll create a small ledge on the rim that has the "Corvette" logo embossed in it.
51. 2.51 - Rim - Bolts
章節
9 分鐘
In this chapter we'll finish off the rims by adding some bolts using the add-on Bolt Factory.
52. 2.52 - Rim - Air Stem
章節
5 分鐘
In this chapter we'll finish up the rims by adding in some simple air stems.
53. 2.53 - Brake Discs
章節
26 分鐘
In this chapter we'll create the brake discs.
54. 2.54 - Brake Calipers
章節
42 分鐘
In this chapter we'll create the brake calipers around the brake discs.
55. 2.55 - Tires
章節
53 分鐘
In this chapter we'll create the tires. We'll model a section of the treads, shape it, and then spin it around to form the full tire.
56. 2.56 - Shadow Planes
章節
2 分鐘
Since the car is hollow behind the panels, we'll need to add planes inside and on the bottom to block the light from shining through the cracks of all the panels, making it look dark between the panels as if there are things inside.
57. 2.57 - More Tweaks
章節
9 分鐘
Now that the exterior is complete we'll tweak a few things here and there to make it all perfect.
58. 2.58 - Simple Interior
章節
3 分鐘
I've made a really simplistic interior just for the purpose of silhouettes through the tinted windows we'll have. I'll show you generally how it was made or how you can import these assets from the resources folder.
1. 3.01 - Shader Section Breakdown
章節
2 分鐘
In this chapter I'll go over how the shader section should be followed.
2. 3.02 - Setting up the Lighting
章節
3 分鐘
In this chapter we'll set up the HDRI environment that will be lighting our final renders.
3. 3.03 - All Basic Shaders - Part 1
章節
16 分鐘
In this chapter we'll create basic shaders like rubber, plastic, various metals, a general interior shader, and a simple black diffuse shader.
4. 3.04 - All Basic Shaders - Part 2
章節
11 分鐘
In this chapter we'll create basic shaders like various metals, various glass, and window borders.
5. 3.05 - Brake Disc Shader
章節
8 分鐘
In this chapter we'll create the shader for the brake disc.
6. 3.06 - Car Paint - Red
章節
34 分鐘
In this chapter we'll create the main car paint shader we'll be using for both red and black car paint.
7. 3.07 - Car Paint - Black
章節
4 分鐘
Now we'll tweak the red car paint node group and create a black paint material we'll use for things like the vent plastics.
8. 3.08 - Tire Shader
章節
30 分鐘
In this chapter we'll create the shader for the tire, including UV mapping a normal map for the details on the side of the tire.
9. 3.09 - Flag Logo Shader
章節
5 分鐘
In this chapter we'll create the shader for the flag logos that we UV unwrapped in an earlier chapter.
10. 3.10 - Lens Shaders - Part 1
章節
10 分鐘
In this chapter we'll create glass materials for the side light lens, trunk light lens, and the bumper reflector.
11. 3.11 - Lens Shaders - Part 2
章節
18 分鐘
In this chapter we'll create shaders for the tail light lenses and the headlight lenses.
1. 4.01 - Studio Render
章節
26 分鐘
In this chapter we'll set up the ground plane for our render and adjust all necessary settings to achieve the final studio render look. We'll also be adding in compositing nodes to post process the final render.
2. 4.02 - Bonus - Improved Studio Render (NEW)
章節
8 分鐘
In this chapter we'll take everything we made in the previous chapter and tweak some settings to produce better results and to make the studio setup easier to use.
3. 4.03 - Bonus - Warehouse Render (NEW)
章節
5 分鐘
Now we'll take what we made in chapter 1 of this section and set things up for close-up renders that have the background HDRI visible for some extra realism.
init_data: 0.2408, render: 0.0895

評論

“The course is top-notch quality in every single aspect: Chris not only shows how to do things, he also explains all the reasoning behind every modeling decision, so you’ll be able to “understand” and learn the concepts, not just replicate the different steps.”
Car Body Design

Steam 影片

此內容只能以線上串流的方式觀賞。關於串流影片的詳細資訊請見 Steam 串流影片常見問答。

關於此影集

Overview

All the secrets to creating an amazing car in Blender are packed into this step-by-step course. Over 15 years of experience and 6 months of development bring you a Blender training course like no other. I’ll take you through every step of the creation process for creating a Corvette Stingray, including modeling, shading, rendering, and compositing. You’ll learn all the techniques you need to know to create flawless surfaces and impressive renders.

Get Perfect Curves with Advanced Modeling Techniques

The biggest hassle of subsurf modeling is dealing with adding details to curved surfaces and having that additional topology ruin your smooth surfaces. In this course I’ll show you methods that bypass that problem entirely so you can maintain your perfect curves without any hassle. Not only are the results perfect, but the workflow is actually fun and much faster when you don’t have to worry about every detail affecting your surfaces. Plus one of the best benefits is total and care-free control over the resulting topology of your model.

Advanced Modifier Usage for Efficiency and Awesomeness

Modifiers are so insanely powerful, and can be combined in so many ways to achieve really complex tasks. In this course you’ll learn a ton of different and unique ways to use modifiers. From general complex modeling tasks, to other things like instantly getting your windshield wipers flush against the windshield surface, we’ll be using modifiers to make our lives easier in making just about everything.

Shading and Rendering

I’ll be showing you how to create your own customize-able car paint including metallic flakes and orange peel, and all other shaders necessary for the final renders. Then we’ll be setting up an environment to get the right lighting and reflections, and setting up some compositing nodes for a little post processing.

Keep in Touch!

This is an intermediate difficulty course so as long as you have some experience with blender you should be able to follow along fine. But if you need any help going through the project you can get in touch with me. Or even if you just want to share your progress or chat about the techniques!

系統需求

Windows
macOS
SteamOS + Linux
    最低配備:
    • 作業系統 *: Windows 7
    • 處理器: Intel Core 2 或是同性能的 AMD 處理器
    • 記憶體: 1 GB 記憶體
    • 網路: 寬頻網際網路連線
    • 儲存空間: 200 MB 可用空間
    • 備註: 540p 適合 5Mbps 之網路頻寬環境；360p 適合 3Mbps。
    建議配備:
    • 作業系統: Windows 10
    • 處理器: 推薦使用 Intel Core I3 以上或是同性能的 AMD 處理器來撥放 1080p 高畫質視訊。
    • 記憶體: 2 GB 記憶體
    • 網路: 寬頻網際網路連線
    • 儲存空間: 500 MB 可用空間
    • 備註: 1080p 適合 12Mbps 之網路頻寬環境；720p 適合 8Mbps。
* 自 2024 年 1 月 1 日（PT）起，Steam 用戶端僅支援 Windows 10 及更新版本。
    最低配備:
    • 作業系統: Mac OSX 10.7
    • 處理器: Intel Core 2 或是同性能的 AMD 處理器
    • 記憶體: 1 GB 記憶體
    • 網路: 寬頻網際網路連線
    • 儲存空間: 200 MB 可用空間
    • 備註: 540p 適合 5Mbps 之網路頻寬環境；360p 適合 3Mbps。
    建議配備:
    • 作業系統: Mac OSX 10.10+
    • 處理器: 推薦使用 Intel Core I3 以上或是同性能的 AMD 處理器來撥放 1080p 高畫質視訊。
    • 記憶體: 2 GB 記憶體
    • 網路: 寬頻網際網路連線
    • 儲存空間: 500 MB 可用空間
    • 備註: 1080p 適合 12Mbps 之網路頻寬環境；720p 適合 8Mbps。
* 自 2024 年 2 月 15 日（PT）起，Steam 用戶端將不再支援 32 位元遊戲或 macOS 10.14 或更舊版本。
    最低配備:
    • 作業系統: Linux Ubuntu 12.04 或較新版本，SteamOS 2.20 或較新版本
    • 處理器: Intel Core 2 或是同性能的 AMD 處理器
    • 記憶體: 1 GB 記憶體
    • 網路: 寬頻網際網路連線
    • 儲存空間: 200 MB 可用空間
    • 備註: 540p 適合 5Mbps 之網路頻寬環境；360p 適合 3Mbps。
    建議配備:
    • 作業系統: Linux Ubuntu 12.04 或較新版本，SteamOS 2.20 或較新版本
    • 處理器: 推薦使用 Intel Core I3 以上或是同性能的 AMD 處理器來撥放 1080p 高畫質視訊。
    • 記憶體: 2 GB 記憶體
    • 網路: 寬頻網際網路連線
    • 儲存空間: 500 MB 可用空間
    • 備註: 1080p 適合 12Mbps 之網路頻寬環境；720p 適合 8Mbps。

顧客評論

評論類型


購得方式


語言


自訂
日期範圍
如欲檢視特定日期範圍內的評論，請在上方圖表框選一段日期範圍，或點擊直條。

顯示圖表



遊戲時數
依照使用者撰寫評論當時的遊戲時數篩選：


不限最低時數 至 不限最高時數
顯示：
顯示圖表
 
 隱藏圖表
 
篩選條件
排除離題評論活動
遊戲時數：
無其它評論符合上述篩選條件
調整上方的篩選條件以檢視其它評論
評論讀取中…