All the secrets to creating an amazing car in Blender are packed into this step-by-step course. I’ll take you through every step of the creation process for creating a Corvette Stingray, including modeling, shading, rendering, and compositing.
Všechny recenze:
2 uživatelských recenzí - Pro vygenerování hodnocení je potřeba více uživatelských recenzí
Datum vydání:
15. lis. 2018
Produkce:
Značky

Abyste mohli tento produkt přidat do svého seznamu přání, začít ho sledovat nebo ho zařadit mezi ignorované, musíte se nejprve přihlásit.

Čeština není podporována

Tento produkt nepodporuje Váš místní jazyk. Seznam podporovaných jazyků je k dispozici níže na této stránce.

Poznámka: Produkt Master Car Creation in Blender byl na žádost vydavatele vyřazen z výsledků vyhledávání a veřejného zobrazování v obchodě služby Steam.
 

Obsah seriálu

1. sekce
Section 2 - Modeling
Section 3 - Shaders and Lighting
Section 4 - Rendering
1. 1.01 - Introduction
Kapitola
1 minut
Overview of what the course will include.
2. 1.02 - User Preferences
Kapitola
2 minut
This chapter goes over a few important changes to the User Preferences before beginning the course.
3. 1.03 - Full Guide to the Guide Mesh
Kapitola
23 minut
One of the most important chapters in the whole course. This chapters contains all in the in's and out's of using the Guide Mesh techniques. This chapter can be used as a quick references when applying these techniques to your own projects.
4. 1.04 - Must See Chapters
Kapitola
2 minut
Just a list of the best chapters in the course. If you're using the course as a reference for your projects, make sure to still check out these chapters as they're among the coolest or most informative in the course.
5. 1.05 - Special Thanks
Kapitola
1 minut
Just a shout out to the awesome people that helped make this course happen.
1. 2.01 - Blueprints
Kapitola
6 minut
In this chapter we'll set up the car blueprints in Blender's background.
2. 2.02 - Hood Guide Mesh
Kapitola
32 minut
We'll start off modeling by making a clean guide mesh of the hood.
3. 2.03 - Front Fender Guide Mesh
Kapitola
47 minut
In this chapter we'll continue creating more of the guide mesh by working on the front fender.
4. 2.04 - Front Bumper Guide Mesh
Kapitola
65 minut
Now we'll finish off the front of the guide mesh by modeling the bumper area.
5. 2.05 - Tweaks
Kapitola
23 minut
Now that we've got a good portion of the guide mesh finished we'll tweak a few spots to make the surface smoother.
6. 2.06 - Hood Finish
Kapitola
31 minut
We'll take a break from the Guide Mesh and create the final version of the hood now with all of it's details.
7. 2.07 - Front Bumper Finish
Kapitola
38 minut
Now we'll finish off the front bumper panel as well.
8. 2.08 - Door Area Guide Mesh
Kapitola
21 minut
In this chapter we'll get back to work on the rest of the guide mesh, starting with the door area.
9. 2.09 - Back End Guide Mesh
Kapitola
46 minut
Now we'll move to the back end of the car and work on the guide mesh there.
10. 2.10 - Finishing the Guide Mesh - Part 1
Kapitola
43 minut
In this chapter we'll start finishing up what's left of the Guide Mesh
11. 2.11 - Finishing the Guide Mesh - Part 2
Kapitola
45 minut
Now we'll finish off the guide mesh in its entirety.
12. 2.12 - Front Fender Finish
Kapitola
53 minut
In this chapter we'll complete the front fender. We'll save finishing the vent area for later on when we actually make the vent.
13. 2.13 - Door Finish
Kapitola
13 minut
In this chapter we'll finalize the door panel.
14. 2.14 - Panel Under Door Finish
Kapitola
15 minut
Now we'll finalize the small panel underneath the door.
15. 2.15 - Back Fender Finish
Kapitola
44 minut
In this chapter we'll finish the back fenders including creating a gas cap for one side.
16. 2.16 - Trunk Area Finish
Kapitola
29 minut
Now we'll finalize the panel for the trunk. This chapter includes problem solving for several tricky parts of the car design where sharper creases blend into smooth curved surfaces.
17. 2.17 - Roof Finish
Kapitola
7 minut
In this chapter we'll finish both panels on the roof of the car.
18. 2.18 - Tail Finish
Kapitola
55 minut
In this chapter we'll finish up the panel on the tail end around the tail lights.
19. 2.19 - Front Windshield Frame
Kapitola
18 minut
Now we'll create the two bars on the sides of the front windshield.
20. 2.20 - Front Windshield
Kapitola
25 minut
In this chapter we'll make the front windshield as well as the area underneath it that houses the windshield wipers.
21. 2.21 - Back Windshield
Kapitola
13 minut
Now we'll create the back windshield.
22. 2.22 - Side Windows - Back
Kapitola
27 minut
I this chapter we'll start work on the side windows. We'll be creating the back side windows in this video as well as rubber stripping around it.
23. 2.23 - Side Windows - Front
Kapitola
26 minut
Now we'll work on the front side window as well as the strip at the base of it.
24. 2.24 - Window Borders
Kapitola
14 minut
In this chapter we'll work on the tinted borders around the front and back windshields.
25. 2.25 - Side View Mirrors
Kapitola
28 minut
In this chapter we'll create the side mirrors.
26. 2.26 - Front Grill
Kapitola
57 minut
In this chapter we'll work on the front grill. The front grill consists of border pieces and a diamond mesh for the actual grill. In this chapter we'll also be doing some trickery with the Data Transfer modifier in order to fake bevels between separate objects.
27. 2.27 - Hood Vent
Kapitola
38 minut
In this chapter we'll create the vent object for the middle of the hood. Again we'll be using the Data Transfer magic for connecting separate objects with bevels.
28. 2.28 - Front Fender Vent
Kapitola
36 minut
In this chapter we'll be finishing the vent area of the front fender as well as creating the vent for it too.
29. 2.29 - Shoulder Vent
Kapitola
32 minut
In this chapter we'll create the vent near the side windows.
30. 2.30 - Headlights - The Cover
Kapitola
14 minut
In this chapter we'll begin modeling the headlight area. We'll start things off making the cover for them.
31. 2.31 - Headlights - The Housing
Kapitola
22 minut
In this chapter we'll create the main housing object for all the components of the headlight.
32. 2.32 - Headlights - The Blinkers
Kapitola
27 minut
Now we'll create all the lamps for the blinkers along the side.
33. 2.33 - Headlights - Daytime Running Lights
Kapitola
22 minut
In this chapter we'll make the Daytime Running Lights also including the glass lens covering them.
34. 2.34 - Headlights - Main Light
Kapitola
15 minut
Now we'll create the components of the main light area.
35. 2.35 - Finishing the Headlights
Kapitola
16 minut
Now we'll be finishing anything left, including fitting the headlights perfectly into the socket cut from the car panels.
36. 2.36 - Tail Lights - The Frame
Kapitola
39 minut
In this chapter we'll be creating the frame around the tail lights.
37. 2.37 - Tail Lights - Main Lights
Kapitola
51 minut
In this chapter we'll create the lenses and interior components of the tail lights.
38. 2.38 - Tail Lights - Trunk
Kapitola
15 minut
In this chapter we'll work on the light bar on top of the trunk.
39. 2.39 - Back Bumper
Kapitola
45 minut
In this chapter we'll move on to creating the back bumper object.
40. 2.40 - Back Bumper Vents
Kapitola
14 minut
Now we'll create the vents that fit into both sides of the back bumper.
41. 2.41 - Mufflers
Kapitola
27 minut
In this chapter we'll create the mufflers and fit them into the bumper.
42. 2.42 - License Plate
Kapitola
6 minut
In this chapter we'll create a simple license plate for the back bumper.
43. 2.43 - Windshield Wipers
Kapitola
59 minut
In this chapter we'll create windshield wipers. We'll also fit them against the windshield using some lattice and shrinkwrap trickery.
44. 2.44 - Logos - Flags
Kapitola
20 minut
In this chapter we'll start on the logos. The first one we'll make is the flag logo which we'll also be UV unwrapping.
45. 2.45 - Logos - Corvette
Kapitola
7 minut
Now we'll create the "Corvette" text logo.
46. 2.46 - Logos - Stingray
Kapitola
19 minut
Now we'll create the chrome stingray logo on the sides of the car.
47. 2.47 - Wheel Wells and Mud Flaps
Kapitola
33 minut
In this chapter we'll create the wheel wells. Then we'll split pieces off from them to create separate mud flap type objects.
48. 2.48 - Side Reflectors
Kapitola
12 minut
In this chapter we'll create the bulbs and lenses for the side reflectors around the wheels.
49. 2.49 - Rims
Kapitola
54 minut
In this chapter we'll be creating the rims. Because it has a lot of symmetry we'll only have to make a portion of it and then we can mirror it around in a circle.
50. 2.50 - Rim - Corvette Logo
Kapitola
18 minut
In this chapter we'll create a small ledge on the rim that has the "Corvette" logo embossed in it.
51. 2.51 - Rim - Bolts
Kapitola
9 minut
In this chapter we'll finish off the rims by adding some bolts using the add-on Bolt Factory.
52. 2.52 - Rim - Air Stem
Kapitola
5 minut
In this chapter we'll finish up the rims by adding in some simple air stems.
53. 2.53 - Brake Discs
Kapitola
26 minut
In this chapter we'll create the brake discs.
54. 2.54 - Brake Calipers
Kapitola
42 minut
In this chapter we'll create the brake calipers around the brake discs.
55. 2.55 - Tires
Kapitola
53 minut
In this chapter we'll create the tires. We'll model a section of the treads, shape it, and then spin it around to form the full tire.
56. 2.56 - Shadow Planes
Kapitola
2 minut
Since the car is hollow behind the panels, we'll need to add planes inside and on the bottom to block the light from shining through the cracks of all the panels, making it look dark between the panels as if there are things inside.
57. 2.57 - More Tweaks
Kapitola
9 minut
Now that the exterior is complete we'll tweak a few things here and there to make it all perfect.
58. 2.58 - Simple Interior
Kapitola
3 minut
I've made a really simplistic interior just for the purpose of silhouettes through the tinted windows we'll have. I'll show you generally how it was made or how you can import these assets from the resources folder.
1. 3.01 - Shader Section Breakdown
Kapitola
2 minut
In this chapter I'll go over how the shader section should be followed.
2. 3.02 - Setting up the Lighting
Kapitola
3 minut
In this chapter we'll set up the HDRI environment that will be lighting our final renders.
3. 3.03 - All Basic Shaders - Part 1
Kapitola
16 minut
In this chapter we'll create basic shaders like rubber, plastic, various metals, a general interior shader, and a simple black diffuse shader.
4. 3.04 - All Basic Shaders - Part 2
Kapitola
11 minut
In this chapter we'll create basic shaders like various metals, various glass, and window borders.
5. 3.05 - Brake Disc Shader
Kapitola
8 minut
In this chapter we'll create the shader for the brake disc.
6. 3.06 - Car Paint - Red
Kapitola
34 minut
In this chapter we'll create the main car paint shader we'll be using for both red and black car paint.
7. 3.07 - Car Paint - Black
Kapitola
4 minut
Now we'll tweak the red car paint node group and create a black paint material we'll use for things like the vent plastics.
8. 3.08 - Tire Shader
Kapitola
30 minut
In this chapter we'll create the shader for the tire, including UV mapping a normal map for the details on the side of the tire.
9. 3.09 - Flag Logo Shader
Kapitola
5 minut
In this chapter we'll create the shader for the flag logos that we UV unwrapped in an earlier chapter.
10. 3.10 - Lens Shaders - Part 1
Kapitola
10 minut
In this chapter we'll create glass materials for the side light lens, trunk light lens, and the bumper reflector.
11. 3.11 - Lens Shaders - Part 2
Kapitola
18 minut
In this chapter we'll create shaders for the tail light lenses and the headlight lenses.
1. 4.01 - Studio Render
Kapitola
26 minut
In this chapter we'll set up the ground plane for our render and adjust all necessary settings to achieve the final studio render look. We'll also be adding in compositing nodes to post process the final render.
2. 4.02 - Bonus - Improved Studio Render (NEW)
Kapitola
8 minut
In this chapter we'll take everything we made in the previous chapter and tweak some settings to produce better results and to make the studio setup easier to use.
3. 4.03 - Bonus - Warehouse Render (NEW)
Kapitola
5 minut
Now we'll take what we made in chapter 1 of this section and set things up for close-up renders that have the background HDRI visible for some extra realism.
init_data: 0.252, render: 0.0639

Recenze

“The course is top-notch quality in every single aspect: Chris not only shows how to do things, he also explains all the reasoning behind every modeling decision, so you’ll be able to “understand” and learn the concepts, not just replicate the different steps.”
Car Body Design

Video ve službě Steam

Tento obsah je dostupný pouze ve formátu online přenosu. Více informací o streamovaných videích ve službě Steam naleznete na této stránce.

Informace o seriálu

Overview

All the secrets to creating an amazing car in Blender are packed into this step-by-step course. Over 15 years of experience and 6 months of development bring you a Blender training course like no other. I’ll take you through every step of the creation process for creating a Corvette Stingray, including modeling, shading, rendering, and compositing. You’ll learn all the techniques you need to know to create flawless surfaces and impressive renders.

Get Perfect Curves with Advanced Modeling Techniques

The biggest hassle of subsurf modeling is dealing with adding details to curved surfaces and having that additional topology ruin your smooth surfaces. In this course I’ll show you methods that bypass that problem entirely so you can maintain your perfect curves without any hassle. Not only are the results perfect, but the workflow is actually fun and much faster when you don’t have to worry about every detail affecting your surfaces. Plus one of the best benefits is total and care-free control over the resulting topology of your model.

Advanced Modifier Usage for Efficiency and Awesomeness

Modifiers are so insanely powerful, and can be combined in so many ways to achieve really complex tasks. In this course you’ll learn a ton of different and unique ways to use modifiers. From general complex modeling tasks, to other things like instantly getting your windshield wipers flush against the windshield surface, we’ll be using modifiers to make our lives easier in making just about everything.

Shading and Rendering

I’ll be showing you how to create your own customize-able car paint including metallic flakes and orange peel, and all other shaders necessary for the final renders. Then we’ll be setting up an environment to get the right lighting and reflections, and setting up some compositing nodes for a little post processing.

Keep in Touch!

This is an intermediate difficulty course so as long as you have some experience with blender you should be able to follow along fine. But if you need any help going through the project you can get in touch with me. Or even if you just want to share your progress or chat about the techniques!

Systémové požadavky

Windows
macOS
SteamOS + Linux
    Minimální:
    • OS *: Windows 7
    • Procesor: Intel Core 2 nebo ekvivalentní od AMD
    • Paměť: 1 GB RAM
    • Připojení: Širokopásmové připojení k internetu
    • Pevný disk: 200 MB volného místa
    • Dodatečné poznámky: Šířka pásma: 3 Mbit/s (pro 360p) nebo 5 Mbit/s (pro 540p)
    Doporučené:
    • OS: Windows 10
    • Procesor: Pro přehrávání v HD 1080p je doporučen procesor Intel Core i3 a lepší nebo ekvivalentní od AMD
    • Paměť: 2 GB RAM
    • Připojení: Širokopásmové připojení k internetu
    • Pevný disk: 500 MB volného místa
    • Dodatečné poznámky: Šířka pásma: 8 Mbit/s (pro 720p) nebo 12 Mbit/s (pro 1080p)
* Od 1. ledna 2024 podporuje klient služby Steam pouze systém Windows 10 a novější.
    Minimální:
    • OS: OS X 10.7
    • Procesor: Intel Core 2 nebo ekvivalentní od AMD
    • Paměť: 1 GB RAM
    • Připojení: Širokopásmové připojení k internetu
    • Pevný disk: 200 MB volného místa
    • Dodatečné poznámky: Šířka pásma: 3 Mbit/s (pro 360p) nebo 5 Mbit/s (pro 540p)
    Doporučené:
    • OS: macOS 10.10+
    • Procesor: Pro přehrávání v HD 1080p je doporučen procesor Intel Core i3 a lepší nebo ekvivalentní od AMD
    • Paměť: 2 GB RAM
    • Připojení: Širokopásmové připojení k internetu
    • Pevný disk: 500 MB volného místa
    • Dodatečné poznámky: Šířka pásma: 8 Mbit/s (pro 720p) nebo 12 Mbit/s (pro 1080p)
* Od 15. února 2024 přestane klient služby Steam podporovat 32bitové hry na systému macOS verze 10.14 nebo nižší.
    Minimální:
    • OS: Linux Ubuntu 12.04 nebo novější, SteamOS 2.20 nebo novější
    • Procesor: Intel Core 2 nebo ekvivalentní od AMD
    • Paměť: 1 GB RAM
    • Připojení: Širokopásmové připojení k internetu
    • Pevný disk: 200 MB volného místa
    • Dodatečné poznámky: Šířka pásma: 3 Mbit/s (pro 360p) nebo 5 Mbit/s (pro 540p)
    Doporučené:
    • OS: Linux Ubuntu 12.04 nebo novější, SteamOS 2.20 nebo novější
    • Procesor: Pro přehrávání v HD 1080p je doporučen procesor Intel Core i3 a lepší nebo ekvivalentní od AMD
    • Paměť: 2 GB RAM
    • Připojení: Širokopásmové připojení k internetu
    • Pevný disk: 500 MB volného místa
    • Dodatečné poznámky: Šířka pásma: 8 Mbit/s (pro 720p) nebo 12 Mbit/s (pro 1080p)

Uživatelské recenze

Druh verdiktu


Druh nabytí


Jazyk


Časové rozmezí
Pro zobrazení recenzí z daného časového rozmezí jej tažením vyberte v grafu výše nebo přímo klikněte na určitý sloupec.

Zobrazit graf



Odehraný čas
Filtrovat recenze dle odehraného času uživatelů v době psaní recenze:


Žádné minimumŽádné maximum
Zobrazit jako: 
Zobrazit graf
 
Skrýt graf
 
Filtry
Nesouvisející recenze jsou vyloučeny
Odehraný čas:
Filtrům neodpovídají žádné další recenze
Abyste viděli všechny recenze, upravte filtry výše
Načítání recenzí...