Anders Multi-Role Combat Platform (Wielozadaniowa Platforma Bojowa, WPB), the platform was named after General Władysław Albert Anders, a famous commander of the Polish forces in the Second World War, who fought bravely only to be persecuted by the communist regime after the end of the war, much like another Polish hero, General Maczek.

The initial idea was to transform the Polish armed forces to a highly-mobile force organized into Mechanized Brigades, equipped with either light wheeled vehicles (the Rosomak platform) or with tracked vehicles (the Anders platform). The Puma family of upgraded BMPs was also considered for the role, but the program was canceled earlier on.

The platform was developed by OBRUM Gliwice with the first variant introduced being a Light Tank or a Fire Support Vehicle. The designation of the vehicle was a source of some controversy – the platform was heavily constrained by the military weight demands in order for it to be air-transportable by the Airbus A400M cargo plane. The maximum weight of the vehicle was to be 35 tons, which meant that the armor had to be very light. Calling that particular Anders configuration a tank would therefore be quite a stretch – the vehicle was not able to slug it out with real Main Battle Tanks and was more suitable for the Fire Support role despite the company’s claims.

The actual development started in 2008. It took only 24 months to develop the platform and to build a demonstrator of the Light Tank configuration. The Light Tank configuration demonstrator was first introduced to public during the MSPO 2010 expo in Kielce, where it also received its official name after General Anders and was christened by his daughter.

The prototype was intended for a crew of three men (driver, commander and gunner) and was made of welded steel plates (ironically, these plates were forged in the Czech Republic, not Poland). It was assembled at AMZ Kutno and then transported to OBRUM Gliwice where it was finished. The exact thickness of the plates was unknown but it was stated that the basic protection level of the Anders Light Tank was STANAG 4569 Level 3 (protection against 7.62mm AP rounds at 30 meters only).

It could, however, reach STANAG 4569 Level 5 or even Level 6 according to some reports by installing additional armor plates (the armor system was made to be modular), which would make it resistant to 25mm APDS shells at 500 meters from the front (in case of Level 5) or 30mm APFSDS shells at 500 meters from the front (Level 6).

The vehicle weighed approximately 33 tons and did therefore fit the military requirements (although the increase to Level 5 or Level 6 protection increased its weight up to 44 tons). It was powered by the German MTU 8V199 TE20 engine producing some 710hp, giving it an excellent power-to-weight ratio of 21.5 hp/t. If needed, the engine could up-tuned to some 800hp to handle the increased armor weight, but this change was not performed on the prototype, which was fast enough even with the standard variant – it had the maximum speed of 72 km/h. The suspension was a newly developed hydromechanical system with six roadwheels on each side and drive sprocket in the front.

The vehicle was equipped with a low-profile manned turret – the crew is sitting in the turret basked, but inside the hull. This solution generally increases the crew protection at the expense of internal volume and crew situational awareness since it has to rely on various periscopes and optics to see outside. The turret is armed with a Swiss 120mm RUAG smoothbore gun along with a coaxial 7.62mm UKM-2000C machinegun (the same type used in the Rosomak turret). The cannon was automatically loaded and takes ammunition from a 12-round magazine. The Fire Control System was of Polish origin, developed by Przemysłowe Centrum Optyki. The gun was not stabilized on the prototype, but the stabilization mechanism was developed for it.

Additional armament consisted of the Kobuz remote-controlled weapons station module armed either with a 12.7mm heavy machinegun or a 40mm grenade launcher. Additional equipment and protection measures included:

• Obra laser indication warning system

• Israeli Trophy APS (mock-up only)

• Ukrainian Zaslon APS (mock-up only)

• Radmor or Fonet communication systems

• Air conditioning

• Auxiliary Power Unit

• Night/Day PKN-72B sights for the driver by Przemysłowe Centrum Optyki

• Stopfire fire suppression system by WSK PZL Warszawa II

• NBC protection equipment (filtration and warning systems)

• Talin navigation system

The MSPO introduction of the vehicle was met with lukewarm response. The most common criticisms included the fact that the vehicle was under-developed at the time (missing stabilization was considered a major problem for a vehicle that effectively had to rely on mobility to survive) and its protection levels were considered insufficient (especially in contrast with the older T-72 variants it was supposed to replace). These issues resulted in the military’s dismissal of the project at the time.

Despite these setbacks, OBRUM continued to develop the platform, resulting in an IFV configuration demonstrator with the Italian HITFIST-30P turret used on Rosomak. Another Fire Support version also appeared two years later, this time with a Belgian CT-CV turret by CMI Defence , armed with a 105mm gun. This variant was introduced to public during the EUROSATORY expo in Paris in 2012. Another little-known variant is a missile tank destroyer.

The final fate of the project is not well documented. Failing to attract any serious attention, it seemingly disappeared and there were several cancellation reports with the Polish military realizing that such light fire support vehicles would never replace a true Main Battle Tank and opting to purchase a number of modernized Leopard 2 Main Battle Tanks instead. The platform appeared back in 2016 under a different name (UMPG) in its IFV configuration. Despite the designation change, it’s clearly a further development of the Anders platform – unfortunately, without the General’s name this time. Whether it will attract more attention than its ill-fated predecessor remains to be seen, but given the fact that its IFV competition (CBWP Ratel) exists in model version, the chances of it becoming Poland’s future tracked IFV (replacing the BMP series) are rather good. Currently, Anders' direct competitor is also being produced. The army has placed an order for 116 BWP Borsuk vehicles, which are currently in production. The first production units are expected to be delivered to the army at the end of this year (2025).

So, the future of the Anders project is almost certain. It will remain as one or few prototypes, locked away or rotting somewhere on the factory grounds.

Anders in World War 3 is a progressive tank destroyer that players receive upon reaching level 6. It is the first representative of this class of Strike available to players.

As its class name suggests, it is best suited for destroying other vehicles. It can be equipped with one of two turrets, the first with a 105mm gun and the second with 120mm armament. The first one deals less Alfa damage than the second one, but fires faster.

Anders can be described as a gun on a tracked chassis, ideal for hit-and-run tactics. Powerful armament, good mobility, and poor durability mean that, apart from this tactic, it is best used to support allies from a distance. As for armor, the front is decent, while the sides and rear only protect against machine guns in the basic version.

Due to these characteristics, combat with infantry in urban areas will end very quickly and spectacularly for Commander of Anders. It is possible to equip the vehicle with additional protection systems such as APS, jammers, or reactive/net armor, but none of these upgrades will change the core gameplay of this vehicle. 

The Snake version of Anders is currently available in our in-game store for 3000 SP / 120 UNC.

The Snake is characterized by camouflage of the same name and a configuration focused on maximum and overwhelming firepower. The turret with a 105 mm cannon and a 25 mm RCWS will allow you to destroy almost everything that isn't a main battle tank almost instantly. Reactive armor, on the other hand, will allow you to survive a little longer in urban terrain.

The Mout version of Anders is currently available in our in-game store for 3000 SP / 120 UNC.

The Mout features Sea camouflage and a configuration designed for heavy combat in urban areas. Its powerful 120 mm gun allows it to inflict heavy damage on any opponent with a single shot. It'is protected against infantry weapons and ATGMs by a tandem of heavy APS and net armor on the sides and rear of the vehicle. This is an almost ideal configuration for tactics involving a quick devastating attack and then jumping between buildings or behind an obstacle. 

Both blueprints will be available in the store for over 20 days.

Meanwhile, that's all for now. Fall out, operators!

9 unique modes

Tactical gameplay inspired by real heroes

Developed in Ukraine by a solo developer

Thank you to everyone who supported the project, added it to their wishlist, and believed in this game.

Your support made this release possible.

Play Bayraktar and Stugna on Steam

https://store.steampowered.com/app/3757410/Bayraktar_and_Stugna

*Fixed the issue where the courier information was not correctly retrieved when receiving packages from the central city courier

*Fixed an issue where abnormalities occurred under specific conditions when activating the Throwing Talent

*Increased the movement speed of all pets

*Fixed the issue where activating the "Heavy Strike" talent caused an anomaly

*Fixed the issue where some waste sorting tools could not be sold

*Fixed the issue where the billiards mini-game would freeze under specific circumstances

Get ready for your first trial, Plague Lords.
On October 30, the free prologue — Plague Lords: Witch Hunt — will be released.

https://store.steampowered.com/app/1827240/Plague_Lords_Witch_Hunt/

You’ll lead a small band of mercenaries trapped in lands ravaged by a mysterious plague that brings the dead back to life.

Explore infected territories, manage your supplies, build your first camp, make tough decisions — and uncover the first clues behind the plague’s origin.

💀 Plague Lords: Witch Hunt is the beginning of your story in the world of Plague Lords.
Will you survive the plague?

Get ready for your first trial, Plague Lords.
On October 30, the free prologue — Plague Lords: Witch Hunt — will be released.

https://store.steampowered.com/app/1827240/Plague_Lords_Witch_Hunt/

You’ll lead a small band of mercenaries trapped in lands ravaged by a mysterious plague that brings the dead back to life.

Explore infected territories, manage your supplies, build your first camp, make tough decisions — and uncover the first clues behind the plague’s origin.

💀 Plague Lords: Witch Hunt is the beginning of your story in the world of Plague Lords.
Will you survive the plague?

This update brings powerful new features and precision improvements to both the CNC Milling Machine DLC and the Lathe Machine DLC, making your workshop more capable than ever!

---

🏗️ All Machines

• 📂 New: Load/Save dialog now remembers the last used folder.

• 📏 New: Milling machine workpieces (cuboid or cylindrical) can now reach up to 50 cm on each axis.

• ✨ Improved: Tools now deliver cleaner cuts, even at higher speeds.

• 🧰 Improved: Ball nose end mills now have better looking meshes.

---

⚙️ CNC Milling Machine DLC

• 💾 New G-Code Support:

  • [c]M97[/c] – Internal subprogram start

  • [c]M99[/c] – Subprogram end

  • [c]G4[/c] – Dwell command

  • G40, G41, G42 - Tool radius compensation

• 🧭 New: Supported G-codes are now listed in the INFO tab on the CNC display.

• ⚙️ Tweaked: CNC max feed increased to 10,000 and max spindle speed to 20,000.

• 🔄 Fixed: [c]Sxxxx[/c] now correctly updates spindle speed on the fly — no need to stop the spindle first.

• 🛠️ Added: Functional tool changer (animation still in progress).

• 💾 Added: Saving of offsets and tool definition.

• 🧮 UI Fixes: Status tab alignment improved.

• 🧩 Added: “Prepared Tool” and “Active Tool” indicators to the status bar.

• 🌀 Fixed: G2 arc interpolation and early edge detection on cylindrical workpieces.

---

🔩 Lathe Machine DLC

• 🔧 Fixed: Drills can now be properly clamped in the tailstock.

• 🔄 Changed: Workpiece can now be rotated by 90°, offering more setup flexibility.

---

Your workshop just got smarter, faster, and cleaner — test the new tool changer, try out the updated G-code commands, and enjoy smoother, more realistic machining!

修复一部分剧情主角默认朝向的问题

修复切换地图时NPC闪现的问题

修复了一部分文本问题

修复部分剧情中NPC错乱的问题

补充了一些音效

为拍照添加了鼠标左键的操作

略微提升了一点食堂小游戏的难度

• The hint Elfie gives to rotate the blocks should now properly indicate that it's double tap (double click) and not just tap.

• Added middle click as a secondary action to rotate the blocks. This is just a single click at the moment.

• The hint Elfie gives to rotate the blocks can now appear in level 3, 4 and 5. (Only 3 previously.) So players that might have accidentally completed level 3 are more likely to still be able to get the hint.

Added a 2026 World Cup Finals simulation with 48 already and potentially qualified teams. It will be available until 2026 World Cup is over.




You can filter teams by specific teams on the "Active team" page.

Web site:
https://simcups.com

🎃 Playing some HAUNTED Spin & Play Hands! Let's see how we're gonna do 👻. Of course, we're rewarding livestream viewers generously 🎁🎉

📝 Enter your GOP ID DURING the livestream in our form to claim your attendee reward: https://forms.office.com/r/DyxwqfE4pY (link will become active on Friday, October 17th at 3PM CEST)

Watch our weekly livestreams on:
Facebook: https://www.facebook.com/events/1155934555868575
YouTube: https://youtube.com/live/TfeztBu21Uk?feature=share
Twitch: https://www.twitch.tv/governorofpoker