OMSI 2: Steam Edition - Aerosoft
Unfortunately, the official OMSI 2 Forum was closed on May 1st, 2020. But there is already an alternative! The OMSI - WebDisk forum, which has been existed for around 7 years now, has developed into a well-known OMSI platform that should be encouraged. The server capacities have been extended since last weekend so that the increased access can be handled. Aerosoft is happy to support the website operators and to give the OMSI 2 community a new home, of course with full support from us and developers.

Further information can be found here (German only): https://reboot.omsi-webdisk.de/community/thread/1202-abgeschlossener-umzug-neuerungen/?postID=13304#post13304

Forum: https://reboot.omsi-webdisk.de/community/
OMSI 2: Steam Edition - Aerosoft
https://store.steampowered.com/app/708173/OMSI_2_Addon_BremenNord/
Changelog Patch 2.032
---------------------

  • Revision of the new section Bf Aumund - Gewerbekamp (thanks to all users for your feedback!)
  • Passenger height Bf Aumund revised
  • Revision of the AIList for Bremen-Nord Modern (no more Neoplan vehicles)
  • NEW: Changed traffic light phase at the Lerchenstr stop: a separate circulation per direction of travel
  • NEW (for Bremen Nord Modern): Annual timetable from May 4th, 2020 (Mon-Fri)
  • NEW: Announcement Wilhelm-Zöllig-Str (Bremen_2010.hof)
  • NEW: Modified sound for exterior sliding doors
  • NEW: KI BSAG Repaint revised (46 car numbers)
  • FIX: Entrypoint Borchsholt placed to the rear (bus no longer spawns in the construction site)
May 11, 2020
OMSI 2: Steam Edition - Aerosoft
https://store.steampowered.com/app/1232070/OMSI_2_AddOn_Studio_Polygon_400_MMC_Pack/
Changelog

Additions:
  • Add cab camera view to control the Scania moveable dash toggle switch.
  • Add alarm for when the emergency exit door is open.
  • Make cab identification plate a setvar.

Changes:
  • Increase ADL and N250 cab engine sounds by 20%.
  • Increase Voith retarder volume by 50%.
  • Change currency on LHD Almex to Euros.
  • Change driver views.
  • Allow Scania to engage gear without brake.
  • Reduce resolution of dash screen textures.
  • Update HOFs.
  • Reduce texture resolution on all lightmaps and other textures.
  • Change volume of ADL warning sound.
  • Only show the Ticketer pass acceptance screen when not moving.
  • Remove clutter from AI variants.
  • Remove interior vents from AI variants.

Fixes:
  • Fix Scania moveable wheel.
  • Fix AI variants showing all seat variants.
  • Fix engine bay ad boards on 10.9m Scanias.
  • Fix full rear Hanover destination clipping with frame.
  • Fix floating cup on low height variants.
  • Fix missing DG3/G3 screen on ADL 11.5m ZF.
  • Fix Voith hunting gears between 1st and 2nd.
  • Fix window decals not covering the entire door on RHD variants.
  • Fix ramp floor texture not updating.
OMSI 2: Steam Edition - Aerosoft
https://store.steampowered.com/app/730261/OMSI_2_AddOn_Mnchen_City/
Changelog:
Bus:
  • Copilot can also switch the stop automatically on several tours
Map:
  • Intersections with tram tracks have been mitigated so that passengers do not complain when driving over them
OMSI 2: Steam Edition - Aerosoft
https://store.steampowered.com/app/1232070/OMSI_2_AddOn_Studio_Polygon_400_MMC_Pack/
SP 400MMC V1.0a Changelog
Additions:
  • Add missing civics template.
  • Add missing E4_Interior_RearDoorMouldings CTCtexture.
  • Show handbrake symbol on dash screen when handbrake not applied if engine off.
  • Add 10p and £2 coins.

Changes:
  • Work on sounds to make them less rough and choppy.
  • Change Cummins engine scripts for E40D.
  • Change E40D ZF gearbox to be smoother.
  • Change N250UD ZF gearbox to correct version and to be smoother.
  • Change rear lights and reg plate lights to come on with marker lights and not main beams.
  • Change bus on dash screen to only show when doors open or handbrake on.
  • Change light test to not work if ignition or engine on.
  • Show parking brake light with electrics.

Fixes:
  • Fix rear door switch not moving with dashboard.
  • Fix ads clipping with speakers on 10.9m.
  • Fix Scania 10.9m exit door decals being entire body decals.
  • Fix E4_Interior_Floor CTCTexture on 10.3m Dual Door variants.
  • Fix staircase moulding texture on 10.3m Dual Door variants.
  • Fix window decals on 10.3m dual door variant.

------------------------------------------------------------------------

SP 400MMC V1.0b Changelog
Additions:
  • Add AI variants that have a less performance hit compared to normal variants. Consult manual for more info on this.
  • Add door alarm to rear door.
  • Add setvar to control whether the doors require the handbrake to be on to operate. Off by default.
  • Add airport luxe variant which in turn adds the repaint folder for Airport spec.
  • Add luggage rack base CTCTexture to airport variants.
  • Add interior leaflet holder CTC.
  • Add Ticketer_Pad and Ticket CTC textures.
  • Add glass holds CTC.
  • Add window decals to front doors.
  • Add new passenger step sounds.
  • Add ability to move Scania dash. (You may have to zoom into the switch to be able to click it, its on the opposite side of the stalk to the key)

Changes:
  • Change AI scripts to turn systems on.
  • Change N250 axle sounds.
  • TP5800 edits so it doesn't break when turning the bus off while machine still booting.
  • Fix cab reg plate.
  • Increase brightness of moulded lights.
  • Move Hanover bottom line down by 1 pixel.
  • Limit Cummins engine to 2100rpm.
  • Limit Scania engine to 2500rpm.
  • Add rev limiter to ZF gearboxes at idle.
  • Reduce volume of wet lane sounds.

Fixes:
  • Fix interior saloon fans not working.
  • Fix CTC textures on Scania single door.
  • Fix missing pillar on LHD DD.
  • Fix AI not displaying destinations on Cotterell.
  • Fix Scania fuel needle.
  • Fix staircase poles on low height variant.
  • Fix interior HANICS.
  • Fix rear Scania badge on 10.9m
  • Fix ads clipping with speaker on Scania 11.4.
  • Fix interior floor CTC on Scania variants.
  • Fix window surrounds texture on 10.3 DD.
  • Fix rear decals on 10.3 dual door.
  • Fix assault alarm sounding twice when doors/windows open.
  • Fix money moving with rear door.
  • Fix mapping of full rear destination screen.
  • Fix interior HANICS on low height variants.
  • Fix pillars not being repaintable on all variants.
  • Fix interior ceiling CTC on Scanias.

OMSI 2: Steam Edition - Aerosoft
https://store.steampowered.com/app/1232070/OMSI_2_AddOn_Studio_Polygon_400_MMC_Pack/

The Studio Polygon 400 MMC is a low-floor double-deck bus produced since 2014. It is available on a variety of chassis to suit different requirements. Options include various lengths, engine, gearbox, seating and more. This DLC pack includes a highly detailed rendition of the real bus.

This pack contains various variants based off the Alexander Dennis Enviro400 MMC with both Alexander Dennis and Scania chassis options. Various body lengths are included ranging from 10.3m to 11.5m, and also two fictional left-hand drive variants for use in the European market.



OMSI 2: Steam Edition - Aerosoft
https://store.steampowered.com/app/708173/OMSI_2_Addon_BremenNord/
Changelog Patch 2.031
  • Court files for line 677
  • NEW: MAN Lions City describes "Bus ends here" when it reaches the final stop
  • NEW: MAN Lions City TFT Monitor shows a special screen when the end stop is reached / stop request symbol changed (original)
  • NEW: ticket pack for 2020
  • FIX: BOB-Touch Texture added
  • FIX: AI buses do not stop / do not stop senseless (Many thanks to OMSI forum user "fOcus04")
OMSI 2: Steam Edition - Aerosoft
OMSI 2: Steam Edition - Aerosoft


Now the great buses of Darius are also available for real bus mechanics! The Bus Mechanic Simulator is the perfect addition for all fans of realistic bus simulation!

https://store.steampowered.com/app/1011420/Bus_Mechanic_Simulator/

Even the most beautiful bus has to be taken in the workshop from time to time and show its 'inner values'.

In the Bus Mechanic Simulator you can do it yourself and fix the buses at your discretion. The main thing is that you get them back together correctly and ready to drive. Whether it is brakes, tires, electrics, motors, transmissions, air conditioning or lights, everything breaks down or needs maintenance.

https://www.youtube.com/watch?v=CY5iKDNjjsU
The Bus Mechanic Simulator puts you in the role of an experienced mechanic in a bus workshop. In the realistic workshop, you can maintain and repair three different bus models on four test benches, all of them were created in detail by Darius Bode.

Take a closer look at solo buses, articulated buses or double-decker buses on the respective test benches! From optical repairs in the interior to mechanical repairs on the engine and axles to heating and electrics, all facets of the buses are modeled realistically and in every detail. You have countless tools at your disposal to repair or replace up to 3400 removable components.

Over time, you can also unlock a separate, new hall in which you can specifically test the functionality of the brakes and shock absorbers on your buses.

Through faithful MAN buses, developed by Darius Bode, and the high level of detail, this simulation becomes a realistic and entertaining gaming experience with many authentic and varied tasks that have to be mastered.





OMSI 2: Steam Edition - Aerosoft
https://store.steampowered.com/app/636630/OMSI_2_Addon_BusbetriebSimulator/
Changelog - 3D company site update:
  • Fixed: Users with HDD hard drives could not join in some cases
  • Performance optimization for HDD users

...