Jul 6, 2020

Prehistoric Kingdom - Shadow Raven Studios

Welcome to June’s development update!

Last month was great for the dev team, showing an increase in quality for all aspects of development. There’s simply too much to cover, so let’s dive right into the content coverage for June.

Development Progress

The team’s been swell, steadily focusing on their tasks and chipping away at the project as per usual. Mau’s been making a lot of headway tackling trouble spots for performance, isolating issues and finding ways to optimize the overhead behind it. As a whole, frame rate has seen some serious improvement since the PAX build and we’ll continue to make the game as performant as possible.

Animal Locomotion

Construction was well underway to enhance the animal locomotion system in June using the mighty Tyrannosaurus as its base.

We’re shifting towards a system that’s more reliant on bespoke animation for transitions rather than allowing the engine to fill in the gaps - giving us direct control over how an animal begins or stops moving. The creatures can have great art assets, but if locomotion isn’t up to the same standard it all falls apart.

Below is a short look at the animator in action highlighting how the T. rex transitions from various movement states (wip).

So, what’s the benefit of doing things this way? The main bonus is that it eliminates the automated jank that occurs when an animal transitions between a state of movement and its idle position. Instead of magically sliding between poses they’ll kick off the ground or take that first big step into their walk cycle - it looks nice!

This approach does have an increase in animation work, but with the added help of Siaka we really want to get these animals looking as good as they can and the results so far are very promising. We'll continue to polish it up as best we can and show off some new critters in the process.

Fence Junctions

Intersections are tricky! A point where two objects meet in 3D space may result in nasty Z-fighting or excessive clipping, a definite issue that can crop up if two fence lines converge at a central point. We don’t want to pick a dominant pole to show over another, so what’s the solution? Create a junction, of course!

Temporary chainlink shader, it's a bit broken at the moment!

A junction will automatically generate between two different fence types or on either side of additive objects like gates, attractions and points of intersection.

Water Painting

Seth prepared a technical deep dive presentation showcasing some of the impressive complexities and considerations that go into making an advanced system like water painting. With the features themselves becoming increasingly polished by the day, soon enough it’ll just be tidying up the edges and making the water pretty!

One area we’re super pleased with is the ability to edit terrain around and inside bodies of water. As the water tool’s depth is chosen via the intensity slider (UI will be updated soon), being able to manually reshape the terrain both underwater and near it adds a lot of power for creativity and room for experimentation.

Environment

The grassland biome offers a lot of choice in its verticality, including famous foliage such as the acacia, baobab and elephant grass. We’ve had a lot of fun mixing and matching the selection of available plant life to create new environments, much like the previous two biomes.

Structures

As part of the park asset reworking, Nathan’s taken the previous design of our Animal Nursery and elevated it to new heights (literally!). A cornerstone piece of infrastructure for every player, this building’s been updated with a more grounded art direction in an attempt to find that balance between a lovely genetics facility and a giant warehouse for mega lizards.

Adding new components like the various staff areas to increase visual interest, a loading bay inspired by an older iteration was installed onto the structure's extremity.

Although deployment works the same as it always has (drag and drop creatures into the park), the first animal currently bred inside the Nursery will be shown standing inside this area once it's ready to be placed - offering a chance to see the size of the specimen ahead of time!

Switching to a slightly tastier subject, last month we laid out the design plans for feeding as a whole, determining how the process of food production, delivery and consumption will work. As a result, the ground feeders were homogenized in order to account for these plans and work better with ontogeny to prevent excessive clipping or animation that simply wouldn’t work across multiple designs.

It’s important to understand that the updates made to assets allow for a smarter workflow, better performance and a higher quality outcome due to everything we’ve learned along the way. One bit of feedback we’ve encountered from our previous gameplay showcases was that visitor amenities simply didn’t fit in the world we were trying to build, and we agree!

We’ll have a whole bunch of snazzy and far more grounded structures headed your way very soon thanks to the streamlined workflow.

Animation

Ankylosaurus was a defensive powerhouse of the Cretaceous. Covered in hard bony deposits known as osteoderms, this walking tank could produce forces strong enough to break the limbs of the most misfortunate of predators. Did they deserve it? Probably.

Grazing atop the highest of Jurassic trees, Brachiosaurus is a famous sauropod beloved worldwide for its graceful silhouette and enormous size. It was originally speculated to have frequented large bodies of water in order to support its weight - a concept that has since been long abandoned thanks to modern science.

One area of motion we’ve been working to improve is secondary animation on the bigger animals, enhancing our rigs to utilize a more dedicated process for better results. Take a look at our in-engine Brachiosaurus walk test below, showcasing the added jiggle bones used to simulate areas that are high in fat or muscle.

You can see similar practices applied to the Ankylosaurus and Tyrannosaurus earlier in the post, accentuating their thighs, sides and dewlap if present.

Genetics Lab Showcase

As part of the UI streamlining, we wanted to show off how the Genetics Lab looks - complete with significantly better performance and new statistics management to reflect some of our changes detailed below.

You’ll notice that the menu is now fullscreen and consistent with the rest of the UI, future proofing inclusions like a tab-based navigation system for when disease or other animal-related mechanics are added.

Change: Temperature & Biomes

What was previously all grouped under “climates” has now been split into temperature and biome to make each system more distinguishable. Different species have a unique temperature range and can even have multiple plant biomes assigned to them for added diversity, making alt species such as Smilodon fatalis feel far more special.

Boreal is now home to both taiga and tundra vegetation, making way for the newest biome; wetland!

By assigning foliage biomes to the creatures we’re able to give players a unique jumping off point to start designing around in challenge mode. Some species might be specialized into wanting a single biome whereas another might have a handful of preferences that can be freely picked from.

In terms of game design it felt in-authentic to not nudge the players hand slightly towards an aesthetic or goal catered towards the creature they’re designing for in challenge mode. Using a handful of plants from disliked biomes won’t send the animal crazy, but sandbox is always available if habitat needs aren’t quite your thing.

Change: Social Requirements

The social group mechanic has been made more fluid, expanding the criteria to allow for new and dynamic combinations. Some species may have a closed group, or others may have no maximum value at all.

Select species have an added condition for population ratios, however, making mix-gender habitats a bit trickier to care for. Some may only group up in breeding pairs or others may have a more harem-like structure, being led by a dominant male or female. Keeping each sex separate will avoid the population ratio altogether.

If an animal is part of a closed group, they’ll begin to form a herd or pack! If an existing group has filled up, the remaining lonely creatures will split off to create a new one. As long as the exhibit isn’t overcrowded, new groups will be made freely. Just make sure those ratios aren’t imbalanced!

Amongst her time working away on unannounced replacement species for less interesting parts of our roster (don’t worry, they were due for a face lift), Cindy updated Plateosaurus with a fresh sculpt based on a more primitive and reptilian aesthetic.

Lis crafted two new designs to take the mantle of the old whilst reworking the original to fit better within our style.

You can find more of Cindy's work on her ArtStation, here!

...

Thank you for reading June’s Devlog!

Thank you to everyone who waited patiently for the update to arrive, we’re deeply appreciative of your support. We’ll be working on some exciting new elements in July and the team simply can’t wait to get this game into your hands as quickly as possible.

Keep an eye on our social media for any announcements or new information!

Until next time,

- The PK Team

...

Jul 6, 2020

Tabletop Playground Goes International!

Tabletop Playground - Modularity Games

Tabletop Playground is going international: we've worked on making the game ready for translations, and we've completed the German translation! We're also aiming to introduce a platform soon for the community to help with translating to more languages.

As always our latest update also includes a number of other improvements and fixes based on recent feedback:

Enhancements
• German translation can now be activated in the interface settings. It will be automatically selected when the game is started for the first time and Steam is set to German.
• Change color of selected text for better contrast
• Automatically select all text when clicking small text boxes
• Allow snapping when pasting objects
• Add version field to mod.io upload dialog
• When trying to upload a new version of a deleted mod, notify user and upload as a new mod instead
• Scripting: Add Player.setPositionAndRotation, deprecate Player.setPosition and Player.setRotation

VR
• When dragging a card from a stack using the free cursor, keep it at the offset where the drag started instead of centering it on the cursor
• Ensure that grabbed object doesn't overlap with controller model when switching cursors
• Add haptic feedback when highlighting objects (configurable in VR settings)

Fixes
• Don't show an error message when loading a package from mod.io that was edited locally (when subscribing to own package). Ignore the downloaded pacakge instead.
• Width and height were reversed when creating snap point grids
• Don't add new objects to existing object groups when pasting or spawning from the object library. Create new groups instead.
• Make context object selection for copy and delete consistent with other actions (highlighted object takes priority before object selection)
• Resolution settings weren't working properly since the previous update
• Notes were not formatted correctly for one frame (#6)

---

Adding more translations to the game is one of the many features on the early access development roadmap for Tabletop Playground, which you can check out on Trello HERE.

Don't forget to join our community Discord to chat with the dev team and give us your suggestions for new features for the game!