Hello PC Builders,

Today we welcome another new partner to PC Building Simulator, the GPU heavyweight ZOTAC! From todays build you will be able to use various members of their GeForce 10 series of GPUs such as the GeForce GTX 1080 Ti AMP Extreme, GeForce GTX 1070 AMP Extreme, GeForce GTX 1050 Ti OC Edition and even the small but powerful GeForce GTX 1080 Ti Mini!




ZOTAC GeForce GTX 1080 Ti AMP Extreme (GPU)


ZOTAC GeForce GTX 1080 Ti Mini (GPU)


ZOTAC GeForce GTX 1050 Ti OC Edition (GPU)

• New GPUs: ZOTAC GeForce GTX 1050 Ti OC Edition, GeForce GTX 1060 Mini, GeForce GTX 1060 AMP! Edition, GeForce GTX 1070 Mini, GeForce GTX 1070 AMP Extreme, GeForce GTX 1080 Mini, GeForce GTX 1080 AMP Extreme, GeForce GTX 1080 Ti Mini, GeForce GTX 1080 Ti AMP Extreme. (Unlocked in Career from level 24, or in Free Build mode right away)
  
• New Case Fans: NZXT Aer P Black (120mm/140mm).
  
• Players are now warned when starting a new game that it will overwrite their autosave file. Please make manual saves if you want have multiple career save games.
  
• Fixed a problem that could cause the ‘Inferior Part Message’ to appear before you had even worked on a PC. Please note: Existing jobs that have this issue will need to be restarted for the fix to work.
  
• PC Bay has been removed from the apps available in Free Build mode.
  
• SSD images are no longer upside down.
  
• Fixed an issue where some PSU labels would appear over windowed case sides at certain camera angles.
  
• Fixed an error with the lighting app that was caused by some SLI bridges.
  
• Corrected Antec DF500 maximum CPU height data.
  
• Adjusted the Fractal Design Meshify C so that 2x 140mm case fans can be installed in the front without removing the lower cover.
  
• Fixed the rear and top case fan slots being inverted on the Cooler Master H500P.
  
• Fixed an issue where a HDD bay would vanish leaving the drive stuck on the Fractal Design Define R6. Please note if you already have a job with this issue you will need to abandon it for this fix to then work on future jobs.
  
• Added Patriot logo to splash screen.
  
• Added ZOTAC logo to splash screen.

Lots going on, but in the coming weeks you can expect the following:

• New partners.
  
• Lots of new parts.
  
• Steam trading cards.
  
• M.2 drive support.
  
• Controller support.

Custom water cooling design and prototyping is ongoing, this is a major new feature and is going to take time to implement.

Happy New GPU Benching!

The PC Building Simulator Team

Hello PC Builders,

Today we are implementing a few bug fixes, but along with these we are also bringing another hardware partner on board. We are pleased to welcome Patriot to PC Building Simulator and include access to their Viper RAM and Burst SSDs!

Patriot are world renowned for their high-quality RAM and SSDs and now players will have access to some of their finest hardware. Both Viper RGB and LED memory modules provide the best performance and stability in RAM hardware, as well as the most colorful dimensions that come with customised lighting. In addition to the RAM, players will have access to Burst 2.5” SATA III SSD Drives, with an option of 120GB, 240GB or 480GB. Scorch M.2 PCIe Solid State Drives will be available in the near future.

Which Patriot part are you most looking forward to using in the update? Let us know in the comments below!




Patriot Viper LED (RAM)


Patriot Viper RGB (RAM)


Patriot Burst SSD (Storage)

• New RAM: Patriot Viper LED and RGB (unlocked at level 21 in Career or available in Free Build mode right away).
  
• New SSD: Patriot Burst SSD (unlocked at level 22 in Career or available in Free Build mode right away).
  
• New Case Fans: Fractal Design Dynamic X2 GP-12 and Dynamic X2 GP-14.
  
• Fractal Design cases now come with Fractal Design case fans.
  
• Fixed some issues with Bios UI being off screen in 4:3 resolutions.
  
• Fixed the issue where clicking on a monitor would interrupt 3DMark.

We look forward to seeing the new builds you create with these new parts!

Happy Building!

The PC Building Simulator Team

Hello there you achievement hunting addicts,

We’ve been thinking about ideas for Steam Achievements recently and, in early access spirit, we’d like to invite you to help us shape them.

First some rules, most of these are obvious but this is the internet. Any suggestions deemed inappropriate or include bad language will be discounted. Even if you win it doesn't mean we’ll put your achievement in game, the winners of a community vote will receive a prize. If we think any ideas put forward are good ones and are technically possible, we’ll put them in the game. Finally, the vote will be held on Reddit, here. The winners will be the top 3 most up-voted suggestions (that meet the rules). We’ll include a full list of rules at the bottom.

So, what are the prizes? The top three voted suggestions will receive the latest in PC repairman fashion, a PC Building Simulator t-shirt. Custom ordered to your size, you’ll even have choice between a normal t-shirt (boring) and a pun t-shirt (pick this one)!



(images for illustration purposes only, final designs might change)

Lastly, if your suggestion makes it into the top 10 and we use it, we’ll send you a PC Building Simulator sticker!

OKAY! Let the voting begin!

• Achievement suggestions should have a name and details of how it is achieved.
  
• All suggestions should be in English please.
  
• No swearing when naming achievements.
  
• Only Reddit votes count.
  
• Our decisions are final.
  
• Stickers are sent out at our discretion.
  
• Open worldwide, but any winners will need a valid shipping address.
  
• Prizes will be dispatched at our discretion.
  
• Competition ends Sunday 6th of July 11.59pm
  

Hello PC Builders,

Today we are very excited to be adding some stylish Scandinavian cases and AIO CPU Water Coolers, courtesy of our latest partner, Fractal Design. The update now live grants you access to two new cases, with three more models coming soon.

These two stylish new cases are the Define R6 and Meshify C which are both available in an assortment of variations to satisfy any builders needs. In the future the Define R5, Focus G and Node 202 will also be included.



In addition to these cases we have also added the Celsius S24 and Celsius S36 AIO CPU Water Coolers to further allow Fractal Design fans to customize their builds.

Last week we released our Overclocking feature and it has been incredible seeing everyone pushing their builds as far as they can to see who can get the highest 3DMark score. Various issues have been reported since this update and we have started to fix them up in todays build and will continue to do so as they get reported.




Fractal Design Define R6 (Case)
Black, Black TG, Blackout, Blackout TG, White, White TG, Gunmetal and Gunmetal TG variants.


Fractal Design Meshify C (Case)
TG, Dark TG, and White TG variants also available.


Fractal Design Celsius S24 (AIO CPU Cooler)


Fractal Design Celsius S36 (AIO CPU Cooler)

• New Cases: Fractal Design Define R6 and Meshify C
  
• New AIO CPU Coolers: Fractal Design Celsius S24 and Celsius S36
  
• Added the ability to toggle Career tool upgrades on/off after purchasing them, this can be done via the new Tool Upgrade Options menu in the menu screen in Career mode.
  
• OCCT now has 2 test options; ‘Automatic’ that tests stability for 30 seconds and ‘Infinite’ that continues the test until stopped.
  
• Added the ability to underclock your CPU and GPU to reduce system wattage.
  
• If you break a job part through overclocking you are now allowed to replace it.
  
• Added a Discard settings option to the Bios.
  
• Added an extra small delay to the restart boot process to help with hitting the Bios key.
  
• When holding a Build job post-it note it will now highlight on the board the slots you can place it to help find them easier.
  
• XMP can now only be turned back on if the base clock speed is returned to its defaults.
  
• Fixed the issue where duplicate job CPUs sometimes appear in the inventory.
  
• Fixed an issue where the SilverStone RX01 HDD bays could appear extended outside of the case.
  
• Fixed an issue where some CPUs wouldn’t overheat if they didn’t have thermal paste and a cooler.
  
• Fixed an issue on the Cooler Master H500P that allowed case fans to be installed in the same place as AIO Water Coolers.
  
• Fixed an issue on the EVGA DG-8 case series that allowed case fans to be installed in the same place as AIO Water Coolers.
  
• Fixed an alignment issue with AIO Water Coolers in the DG-8 series top slot.
  
• Fixed PSUs being out of alignment in the Cooler Master COSMOS C700P.
  
• Fixed an issue where the compressed air SFX wouldn’t play if used when a PC was powered on.
  
• Fixed some Ryzen CPUs having a lowercase X.
  
• Fixed CPU/RAM Speed and CPU Temp text overlaps in the bios for non-English languages.
  
• 6 pin power connections now have the right connection model.
  
• Tweaked level up emails when nothing is unlocked at that level.
  
• Updated game boot screen to include Fractal Design.

Please keep your overclocking bugs and feedback coming and please do show us the new builds you create with these new Fractal Design parts, we love seeing your creations!

Happy Building!

The PC Building Simulator Team

Hello PC Builders,

It has been a busy few weeks for the PC Building Simulator team but we have finally reached a point where we can release the initial version of our next big feature: Overclocking.

Please Note: This is a major feature update to the game and will be tweaked and improved in the coming weeks based on feedback and bug reports. Various art will be improved once functionality has been confirmed as working as expected.






With this update PC builders will be able to overclock their creations by adjusting areas such as CPU clock speed, CPU voltage, RAM speed, RAM voltage, GPU clock speed, VRAM clock speed and more.



Just like in real-life the aim with overclocking is to push the performance of your hardware to the maximum while maintaining system stability and balancing the heat generated from doing so. Be careful how much you push your hardware, if you push things too far you can break your overclocked components!

We have added a new PC app based on OCCT that will allow you to run a short (yes, this is shorter than the 3DMark time!) stress test of your overclocked hardware so let you know if the system is stable or not.



Overclocking things to know:

• Overclocking is unlocked for CPUs at level 6 and GPUs at level 13 in Career Mode or right away in Free Build mode.
  
• CPU and RAM settings are adjusted in the Bios which can be access via holding the DEL or F2 while booting a PC.
  
• Enabling XMP in the Bios for RAM will auto clock your RAM if you don’t want to manually set values.
  
• GPU settings are adjusted via a new PC app called GPU Tuner.
  Pushing the CPU and RAM too far can result in the part breaking permanently. GPUs can not currently break.
  
• Each purchased component has a variance in overclocking ability to simulate the silicon lottery.
  
• Overclocked system stability issues can result in blue screens on a PC and CPUs will throttle back performance when overheating.
  
• Jobs in Career do not currently request any overclocking features, this will change once the feature is complete.

The player level has been increased from 20 to 25 in this update to allow for 5 new story missions that will appear during these levels.

In addition, we have added random job support for both Dual GPUs and Water Cooling.



Antec AIO Water Coolers

Kühler H2O K Series - K120 / 240
Mercury 120 / 240 / 360 RGB


NZXT Aer P 120mm /140mm Case Fans


SilverStone PS14 (Non-Windowed) Case




This application has had an upgrade, if you have it running/open on a PC and run 3DMark it will now overlay information about your temperatures while the benchmark runs.

• Overclocking feature enabled, you can now overclock your CPU, RAM and GPU.
  
• Added Bios screens for each manufacturer.
  
• Added GPU Tuner application to adjust GPU settings.
  
• Added new stress testing app in the form of OCCT.
  
• Increased Career level cap to 25 to allow for new story based jobs.
  
• Added Dual GPU and Water Cooling based jobs to the random job pool.
  
• Added Antec AIO Water coolers: K120 / 240 & Mercury 120 / 240 / 360 RGB.
  
• Added NZXT Aer P 120mm/140mm Case Fans.
  
• Added non-windowed variant of the SilverStone PS14 case.
  
• System Info app now displays temperature details overlayed on 3DMark if open at the same time as 3DMark.
  
• Added the ability to power on a PC with ‘P’ when focussed on a screen.
  
• The Will it Run app will now take into account SLI performance when checking a PCs specs.
  
• Added further detail for RAM throughout the game to help with overclocking.
  
• Fixed the bug where pre-installed case fans would vanish when removed.
  
• Fixed the missing costs for workshop furniture in all non-English languages.
  
• Fixed a hang that was caused by using the compressed air in some jobs.
  
• Fixed an issue where cables were detached apart from their connections when vsync was disabled.
  
• Fixed an issue where the rear connections on the EVGA Z370 were out of alignment.
  
• Fixed an issue with the case side on the Cooler Master MasterBox 5 MSI Edition that would block installation of parts until it was removed.
  
• Fixed various reported cable clipping issues.

Bug fixing and improvements to the new overclocking feature in the short-term, plus a bunch of new hardware partners we are excited to announce!

Work has begun on Steam Trading Cards, we get asked about these a lot so it will be great to release them as soon as this work is complete.

We are looking forward to seeing how everyone gets on with overclocking, please do share your results with us on the Forums and our Discord server!

Happy Overclocking!

The PC Building Simulator Team

Hello PC Builders,

This weeks update is mostly to fix various issues that have been found since the previous update while we continue development work on further career improvements and the overclocking feature. We get asked alot when overclocking is coming, but it is going to be a few weeks yet due to the work involved so please be patient.




NZXT S340 Elite (White)
We got a lot of requests for the white version of the S340 Elite after our last update so here it is!



EVGA SuperNOVA 1200 P2, 80+ PLATINUM (PSU)



EVGA SuperNOVA 1300 G2, 80+ GOLD (PSU)

• Save games can now be named.
  
• Improved RAM compatibility; in preparation for overclocking, RAM now requires similar sticks in a machine to be matched.
  
• GPU thermal shut-off temperature has been raised, this should reduce the amount of blue screen errors relating to overheating GPU’s.
  
• Added a Restart option to the OS start menu.
  
• Cable connection points that cannot be connected for some reason now highlight in Red.
  
• Diagnose and Repair jobs now require replaced parts to be similar to the ones that were broken.
  
• Fixed PSU fans no longer spinning.
  
• Fixed the duplication issue on the PCI lock of the SilverStone PS14.
  
• Fixed the issue with Build job post-it notes vanishing when transferring them from bench to bench.
  
• Fixed some SATA connections not being connected to the actual motherboard.
  
• Fixed the alignment issues for Water Coolers on the CORSAIR Crystal Series 570X RGB case.
  
• Fixed the issue with the fan being inside the Cryorig C1 CPU cooler.
  
• Fixed not being able to install the lower front case fan on the Antec DF500 when you had a Water Cooler installed in the rear slot.
  
• Fixed an issue with PCI slot covers on the Cooler Master H500P case being out of line with second GPU installs.
  
• Fixed various save game issues reported by players since the last update, these saves should now load with this update.

As mentioned at the start of these notes work has begun on the overclocking feature, alongside this we are working on further career objectives to support features already released such as Dual GPUs and Water Cooling and even adding some more storyline missions!

There is lots of exciting things coming for PC Building Simulator in the coming months, I just wish I could say more!

Happy Building!

The PC Building Simulator Team

Hello PC Builders,

Apologies for the bugs some players have been experiencing since the big update last week, while we knew we had made some big changes to the game some of these issues we just never saw coming. Thanks to everyone who sent in save games and log files, as these have helped us fix up many of the issues for today's update.

The update today contains the following…



To try and improve save game stability between versions and allow us to better diagnose save issues we have made some adjustments to the save game system:

• A backup version of your save game is created when a new version of the game is detected - these won’t be visible in the save menu but will exist in the saves folder.
  
• If an error occurs during loading a save game you will now receive a message telling you this (and stopping you from going any further) rather than allowing you to continue as normal and it being rewritten by autosave - this means when you send us a save game we can see the error being generated without the risk of it being lost due to being saved over.

Eagle eyed players may have noticed in pre-release videos there was an option to pick the orientation of an air cooler when installing on a CPU. This was disabled ahead of launch but has now been re-enabled to allow for further feedback and testing as we get quite a few requests about this!




The EVGA CLC 120, 240 and 280 are now available to include in your builds!


From Cryorig this update includes their A40, A40 Ultimate and A80 AIO coolers.


The TD03-LITE, TD03-SLIM, TD02-LITE and TD02-SLIM AIO coolers from SilverStone’s Tundra series are now available to build with.


If you like your RGB on your AIO coolers then the ORCUS 240 is going to be a must have in any build!


The 120mm IRIS 12 case fan includes full RGB support and pairs nicely with the ORCUS 240!


Until now only the Hyper Beast version of the S340 Elite existed in the game but from today you will be able to build with the standard version in its Black, Black + Blue and Black + Red options.


With today's update we have added support for Spanish, we appreciate the Spanish community's patience on this!

• Save game handling changes.
  
• Enabled CPU Air Cooler orientation option.
  
• New AIO Water Coolers from EVGA, Cryorig, SilverStone and Raijintek.
  
• New Case - NZXT S340 Elite.
  
• New Case Fan - Raijintek IRIS 12.
  
• Spanish language support added.
  
• You can now remove a Build job post-it from a PC and reassign it.
  
• Mouse buttons can now be bound in the Key Binding menu.
  
• Adjusted pricing of the Ryzen CPUs.
  
• Updated the Raijintek Paean storage slots so that you can install both HDDs and SSDs.
  
• Adjusted heat data to allow for differences between air and water cooling.
  
• Fixed an issue that could cause the players to fall out of the workshop, if you have a save game that has this issue you should be reset back inside when you next load.
  
• Fixed the issue where the Intel 7700 wasn’t being verified as good enough against itself in the Will it Run app.
  
• Fixed an issue where a PC could drop through the desk to the floor and allow duplication of that PC.
  
• Fixed some GPU’s being powered even without their cables attached.
  
• Fixed Water Cooler installation so that they can no longer be installed when the CPU caddy is still open.
  
• Fixed an issue with the SATA cables on the Gigabyte AB350 Gaming 3 facing the wrong way and going through the board.
  
• Fixed the rear fans on the SilverStone PS14 installing in the wrong direction.
  
• Fixed the Cooler Master H500P not coming with its front fans.
  
• Fixed the CORSAIR Crystal Series 570X RGB not coming with its front fans.
  
• Fixed a few cables having the wrong picture and text in the shop and inventory.
  
• Fixed an issue with the SilverStone PS14 breaking build jobs.
  
• Fixed the DVD drive bay being required to complete a SilverStone PS14 build.
  
• Fixed an alignment issue on the In Win 303-MSI Dragon Edition when installing the SilverStone NJ520 PSU.
  
• Fixed an issue where you could enter higher than supported values in the lighting app to make your PC look nuclear!
  
• Fixed an issue on the In Win 303-MSI Dragon Edition case that allowed you to install Water Coolers on the bottom of the case.
  
• Fixed Thermal Paste being in the wrong location on the Intel 7700 CPU.

Please continue to post any issues you find or features you want in the forums, all feedback is incredibly useful.

Happy Building!

Hello PC Builders,

I know it has seemed like a long few weeks waiting for the next update but we needed the time to get a couple of big features complete and ready for future content updates. A big thanks to the wonderful Official Discord server community for all the support over the last few weeks, you are a truly amazing bunch! If you haven’t joined this yet, I would recommend doing so. Visit via: https://discord.gg/pcbuildingsim




As announced earlier today we have officially welcomed Antec to the PC Building Simulator family so you can expect further parts from them in the future, the initial batch of products can now be found on our roadmap and from the update today you will be able to use the Antec DF500 case.




All In One CPU water cooling has arrived! This update brings the initial implementation of support for AIO CPU water coolers to the game which includes CPU coolers from Cooler Master (MasterLiquid 120/240) and NZXT (Kraken M22/X42/X52/X62/X72).
There are further coolers on the way so as always take a look at our roadmap for future parts that will be appearing in the game.

Support for a brand new part type is a big feature and has meant updating all the cases in the game so there is a good chance you will bump into some bugs when using these new parts, please do continue to report any in the usual fashion so we can fix up any issues



The internal PC cables of PC Building Simulator have well documented ‘issues’, these issues have been a thorn in the development teams side for as long as we can remember so we decided to overhaul their code as we had to get them to work with the water cooling parts anyway.
Functionality wise you will most likely not notice a difference, some previous issues will be fixed but there is just as much chance that new ones will occur but the difference now is we actually have a good way of fixing any future issues with cables.

The more interesting feature of this work is that we can now customise cables! So we have added over 100 new cable options to allow you to customise your builds even further.

Again, this is a major rework so please do report any bugs you have with this new feature.



AMDs 2nd generation Ryzen CPUs are now available to build with! This includes the Ryzen 5 Six Core 2600/2600x & Ryzen 7 Eight Core 2700/2700x variants.

• New Case - Antec DF500.
  
• New Case - SilverStone PS14.
  
• New AIO CPU Water Coolers - Cooler Master MasterLiquid 120/240 & NZXT Kraken M22/X42/X52/X62/X72.
  
• Rewritten Cable code - To allow us to fix issues moving forward.
  
• New Cable Customisation Options - These can be selected by the new Cables menu in your inventory.
  
• Internal cable connections now have their correct models.
  
• New CPUs - AMD Ryzen 2nd Generation CPUs (Ryzen 5 Six Core 2600/2600x & Ryzen 7 Eight Core 2700/2700x).
  
• Added RGB enabled GIGABYTE AORUS SLI Bridges when building a SLI machine with 2x compatible GIGABYTE GPUs.
  
• Updated all cases to allow AIO CPU water coolers to be installed where compatibility allows.
  
• The PC status window in build mode can now be toggled on/off with the ‘Tab’ key.
  
• SLI/Crossfire support is now listed on GPU information in the shop and inventory.
  
• Changed how the PC Parts section of inventory works so that you should no longer build up a stock of useless case parts throughout the career mode.
  
• Compressed Air now has audio!
  
• The Cooling category in the shop and inventory has now been split up into CPU Cooling and Case Fans categories.
  
• Motherboards that support both Kaby Lake and Skylake CPUs in real-life will now do so in the game.
  
• Your currently held item is now displayed on screen when working on a PC (this will get made prettier at a later date).
  
• Fixed the issue where case fans rotated when removed.
  
• Fixed the issue where case fans installed facing the wrong way.
  
• Fixed the PSU cover on the DG-8 series installing in the wrong place on these cases.
  
• Fixed an issue where HB SLI bridges would remove when removing a PC from the storage cupboard.
  
• Fixed the missing ‘auto’ tag on autosaves when playing in any non-English language.
  
• Fixed SLI/Crossfire bridges not appearing in the RL07 case.
  
• Fixed being unable to swap an underpowered PSU on jobs that require PC’s to have more power.
  
• Fixed various ‘Will it Run’ issues that should reduce the amount of requirements not met flags when using similar hardware to what is needed.
  
• Fixed an issue with maximum allowed budget jobs where the total updated incorrectly.
  
• Reduced the new email SFX a bit.
  
• Updated GPU/CPU data from 3DMark.

As mentioned a lot in these notes there are many new things in this build, so even with our internal testing there is still a chance of more issues than we would like, but please do report any you find so that we can fix up the important ones as soon as we can.



Bug fixing mostly for a little while, plus adding more AIO CPU Coolers. We also plan to add Spanish language support fairly soon.

Job types will also be expanded to allow for the most recent features (Dual GPUs/Water Cooling) to become part of objectives, more story type missions are also being worked on.

Design and planning of Overclocking has begun, while this is some way off we are looking forward to getting this up and running!

Happy Water Cooling Building!

Hey PC Builders!

We’ve been announcing some new PC parts from many of our existing partners recently, so how about a new partner entirely? We’re delighted to reveal that Antec are coming to PC Building Simulator starting with their DF500 case later today as part of our latest patch!

If you’re looking for high-performing cases combined with stunning looks in PC Building Simulator, Antec have you covered. Players will initially have access to five Antec cases and these include the versatile gaming mid-tower DF500, extreme mid-tower P110 Luce, P6 compact powerhouse, P7 window and P8 performance series. These high-end cases come with some amazing features including air intake filters, airflow cooling systems and space-efficient interiors. A whole host of features that any PC Builder would love to have at their disposal.



Which of these Antec cases are you most looking forward to using in PC Building Simulator? Let us know in the comments below!

PC Building Simulator has been in Early Access for just over two months and the community has been amazing! Thank you all for your continued support. We’ll have more features and products implemented into the game as we progress through Early Access. To see what we’ve got planned in this time, please visit our Early Access Roadmap: https://www.pcbuildingsim.com/early-access-roadmap/

For the latest news and updates, be sure to follow us on Facebook and Twitter or join our Discord server!

Hey PC Builders!

We’re ecstatic to announce that we’ve partnered with NZXT to create a unique case that you can use in-game and now buy… IN REAL LIFE! The NZXT H440 PC Building Simulator Limited Edition case is restricted to 250 units and it’s a special piece of kit.

This unique case features an exclusive colorway, liquid cooling support, all-steel top and front panels, HDD drive trays and chassis, effortless cable management capabilities and integrated PWM fan hub. In addition to these features, this H440 also comes with four of NZXT’s newly designed FNv1 case fans and a free Steam key for PC Building Simulator.

Here’s how it looks in-game and under your desk:


The NZXT H440 PC Building Simulator Limited Edition is available now, in the US only, for $119.99. You can find out more at : https://www.nzxt.com/product-overview/h440-pc-building-simulator


For the latest news and updates, follow us on Facebook and Twitter!

The PC Building Simulator Team