Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/536545/

Are you ready to make high-speed, low-altitude passes over crowded fields? Get ready to give your joystick a death-grip as you make tight turns just below the critical angle of attack. Compete to be the best duster around in Farm Air, the latest from TakeFlight Interactive.



Put yourself in the boots of a new crop duster pilot. You’ll be challenged to five increasingly difficult scenarios – and you’ll have to perform well if you want to earn the respect of your new co-workers!



You’ll start by taking on a time trial to see if you can dust a field fast enough to get hired. From there, your newly-acquired skills will be put to the test with novel challenges and competition from your fellow pilots. After you’ve proven you’re the best crop duster around, challenge your friends in a multiplayer scenario!



Each scenario can be flown in either Alabeo’s PA-36 Pawnee Brave (also available on Steam) or FSX Steam Edition’s default Maule – your choice.



TakeFlight Interactive is a games studio formed by Aces alumni who are dedicated to bringing interactive mission-based experiences to the world of Flight Simulator X: Steam Edition.



Note: Recommended for more experienced FSX:SE pilots, Farm Air will pit your skills against some exacting, low-altitude flight situations.

Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Farm Air by TakeFlight Interactive.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/536545/

Are you ready to make high-speed, low-altitude passes over crowded fields? Get ready to give your joystick a death-grip as you make tight turns just below the critical angle of attack. Compete to be the best duster around in Farm Air, the latest from TakeFlight Interactive.



Put yourself in the boots of a new crop duster pilot. You’ll be challenged to five increasingly difficult scenarios – and you’ll have to perform well if you want to earn the respect of your new co-workers!



You’ll start by taking on a time trial to see if you can dust a field fast enough to get hired. From there, your newly-acquired skills will be put to the test with novel challenges and competition from your fellow pilots. After you’ve proven you’re the best crop duster around, challenge your friends in a multiplayer scenario!



Each scenario can be flown in either Alabeo’s PA-36 Pawnee Brave (also available on Steam) or FSX Steam Edition’s default Maule – your choice.



TakeFlight Interactive is a games studio formed by Aces alumni who are dedicated to bringing interactive mission-based experiences to the world of Flight Simulator X: Steam Edition.



Note: Recommended for more experienced FSX:SE pilots, Farm Air will pit your skills against some exacting, low-altitude flight situations.

Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Farm Air by TakeFlight Interactive.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/494521

McDonnell Aircraft's F3H Demon™ was the firm's first swept-wing jet fighter. The aircraft was conceived in 1949 as the XF3H-1™, with the first flight taking place in 1951. Unfortunately, the original power plant proved unsatisfactory, though despite this the F3H-1N™ set an unofficial time-to-climb record in 1955 of 10,000 feet in 71 seconds! In 1953, the Demon™ was refitted with the more powerful and reliable Allison J71 engine. This new engine substantially boosted the aircraft’s performance.



In 1956, the F3H-2N Demon™ was approved as a front line fighter with the U.S. Navy. In service, the Demon performed well, although it was still somewhat underpowered. It was a sturdy, stable platform under all flying conditions. The last of 522 Demons were delivered in 1959 and were not retired until 1964.



The FSX: Steam Edition of the McDonnell F3H-2 Demon, developed by Virtavia, is a faithfully replicated aircraft add-on with four different payload versions, various animations, and smoke trail effects. A great addition to any military fleet!



Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for the McDonnell F3H-2 Demon™ by Virtavia.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/494521

McDonnell Aircraft's F3H Demon™ was the firm's first swept-wing jet fighter. The aircraft was conceived in 1949 as the XF3H-1™, with the first flight taking place in 1951. Unfortunately, the original power plant proved unsatisfactory, though despite this the F3H-1N™ set an unofficial time-to-climb record in 1955 of 10,000 feet in 71 seconds! In 1953, the Demon™ was refitted with the more powerful and reliable Allison J71 engine. This new engine substantially boosted the aircraft’s performance.



In 1956, the F3H-2N Demon™ was approved as a front line fighter with the U.S. Navy. In service, the Demon performed well, although it was still somewhat underpowered. It was a sturdy, stable platform under all flying conditions. The last of 522 Demons were delivered in 1959 and were not retired until 1964.



The FSX: Steam Edition of the McDonnell F3H-2 Demon, developed by Virtavia, is a faithfully replicated aircraft add-on with four different payload versions, various animations, and smoke trail effects. A great addition to any military fleet!



Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for the McDonnell F3H-2 Demon™ by Virtavia.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
Train Simulator Classic 2024 - JayTwoPointOh
08/12/2016

http://store.steampowered.com/app/376976

Experience the grace and elegance of classic German steam locomotion in the form of the DR BR 10, available now for Train Simulator.

The 1950s, Germany’s railway future was in full swing, wires were being erected across key routes for brand new electric locomotives, and the first 5 pre-production units of the famous diesel V200s were in operation. It would seem that the steam days were numbered throughout Germany, but Deutsche Bundesbahn saw a different future for the classic traction.

While electric locomotives were proving successful on their new routes, both the pre-production, and production V200s were suffering greatly from reliability problems, and were less efficient than the steam-powered BR 01. This meant that unelectrified routes would be left with questionable traction for the time being, and that simply wouldn’t do. It was decided that this set back was reason enough to place an order for a new locomotive, while developments had been made to the BR 01, forming the BR 01.10 initially, even this left DB with uncertainty, and a brand-new design would be ushered in to provide.

Power over innovation was the main drive in what would become the BR 10’s design and construction, only a few high-tech advancements were utilised as Krupp focused on reusing parts, such as the proven boiler from the modified BR 01.10. The 4-6-2 Pacific design was settled upon, as the originally proposed Prairie was not suitable. A total of 2 pre-production locomotives were built, 10 001 and 10 002, and while mainly similar, 10 001 was built as a hybrid-firing locomotive, taking both coal and oil in the newly designed 2’2′ T 40 Tender. 10 002 featured oil-only firing, and 10 001 would one day be refitted in such a manner.

The new BR 10 locomotives rolled out of the production line in 1957, very late as far as steam is concerned, and was ready for testing and main line operation throughout the unelectrified routes in Germany. Thanks to the stylised streamlining up front, the BR 10 was expected fulfil its role with flying colours, as the twins could easily gallop at 140 km/h with a full train. In reality, very much the opposite would ring true, while they were fantastic locomotives, their operational limitations left a lot to be desired.

It was already pretty much decided by 10 001 and 10 002’s completion that they would not be followed by a production fleet, the order was cancelled. If it weren’t for that, their limitations would have put an end to future models; the BR 10 featured an astounding 22 tonne axle load, and while this had the benefit of putting down some serious power onto the rails – it would be unlikely that they would slip in any circumstances, hauling any weight – there were very few routes that could accommodate such a heavy locomotive.

Frankfurt, Kassel and Hanover were 3 locations that 10 001 and 10 002 could serve in early service, with both locos being based at Bebra Bf from 1958 until 1962, by which time they were moved to Kassel. In rare cases, the BR 10s could be specially permitted to run on railway lines with a 21 tonne axle load, this was the only way they could reach Münster in their later days. The BR 10s spent many days in the workshop lusting for repair, being essentially the last of their kind, spare parts were hard to come by, and the older BR 01.10 was used more frequently where steam traction was still required.

Sadly, the 1960s would mark the end of the BR 10s in operation, cylinder damage would put 10 002 out of service indefinitely by January 1967, and 10 001 would join her sister in retirement by June of the following year. Once out of service, the two locos went on to quite different lives; 10 002 was used as a heating locomotive for maintenance depots and stations until 1972, when she was sadly scrapped at the Offenburg Repair Shop. 10 001 on the other hand, luckily survived the cutters torch, and after acting as an exhibition locomotive, found a comfortable home at the German Steam Locomotive Museum at Neuenmarkt-Wirsberg, Northern Bavaria.
Despite half the fleet being non-existent today, and the one remaining locomotive being in preservation, the DB BR 10 for Train Simulator, lovingly represented by Partner Programme member Romantic Railroads, will unlock the experience of what it was like to populate the footplate of these classic Black Swans, complete with period mainline rolling stock for the ultimate in German steam era authenticity.
Train Simulator Classic 2024 - DTG_James
08/12/2016

http://store.steampowered.com/app/376976

Experience the grace and elegance of classic German steam locomotion in the form of the DR BR 10, available now for Train Simulator.

The 1950s, Germany’s railway future was in full swing, wires were being erected across key routes for brand new electric locomotives, and the first 5 pre-production units of the famous diesel V200s were in operation. It would seem that the steam days were numbered throughout Germany, but Deutsche Bundesbahn saw a different future for the classic traction.

While electric locomotives were proving successful on their new routes, both the pre-production, and production V200s were suffering greatly from reliability problems, and were less efficient than the steam-powered BR 01. This meant that unelectrified routes would be left with questionable traction for the time being, and that simply wouldn’t do. It was decided that this set back was reason enough to place an order for a new locomotive, while developments had been made to the BR 01, forming the BR 01.10 initially, even this left DB with uncertainty, and a brand-new design would be ushered in to provide.

Power over innovation was the main drive in what would become the BR 10’s design and construction, only a few high-tech advancements were utilised as Krupp focused on reusing parts, such as the proven boiler from the modified BR 01.10. The 4-6-2 Pacific design was settled upon, as the originally proposed Prairie was not suitable. A total of 2 pre-production locomotives were built, 10 001 and 10 002, and while mainly similar, 10 001 was built as a hybrid-firing locomotive, taking both coal and oil in the newly designed 2’2′ T 40 Tender. 10 002 featured oil-only firing, and 10 001 would one day be refitted in such a manner.

The new BR 10 locomotives rolled out of the production line in 1957, very late as far as steam is concerned, and was ready for testing and main line operation throughout the unelectrified routes in Germany. Thanks to the stylised streamlining up front, the BR 10 was expected fulfil its role with flying colours, as the twins could easily gallop at 140 km/h with a full train. In reality, very much the opposite would ring true, while they were fantastic locomotives, their operational limitations left a lot to be desired.

It was already pretty much decided by 10 001 and 10 002’s completion that they would not be followed by a production fleet, the order was cancelled. If it weren’t for that, their limitations would have put an end to future models; the BR 10 featured an astounding 22 tonne axle load, and while this had the benefit of putting down some serious power onto the rails – it would be unlikely that they would slip in any circumstances, hauling any weight – there were very few routes that could accommodate such a heavy locomotive.

Frankfurt, Kassel and Hanover were 3 locations that 10 001 and 10 002 could serve in early service, with both locos being based at Bebra Bf from 1958 until 1962, by which time they were moved to Kassel. In rare cases, the BR 10s could be specially permitted to run on railway lines with a 21 tonne axle load, this was the only way they could reach Münster in their later days. The BR 10s spent many days in the workshop lusting for repair, being essentially the last of their kind, spare parts were hard to come by, and the older BR 01.10 was used more frequently where steam traction was still required.

Sadly, the 1960s would mark the end of the BR 10s in operation, cylinder damage would put 10 002 out of service indefinitely by January 1967, and 10 001 would join her sister in retirement by June of the following year. Once out of service, the two locos went on to quite different lives; 10 002 was used as a heating locomotive for maintenance depots and stations until 1972, when she was sadly scrapped at the Offenburg Repair Shop. 10 001 on the other hand, luckily survived the cutters torch, and after acting as an exhibition locomotive, found a comfortable home at the German Steam Locomotive Museum at Neuenmarkt-Wirsberg, Northern Bavaria.
Despite half the fleet being non-existent today, and the one remaining locomotive being in preservation, the DB BR 10 for Train Simulator, lovingly represented by Partner Programme member Romantic Railroads, will unlock the experience of what it was like to populate the footplate of these classic Black Swans, complete with period mainline rolling stock for the ultimate in German steam era authenticity.
Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/536546

Toposim Eastern Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Eastern Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.



VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.



Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.



This pack includes terrain mesh for the following countries:

Greece
Albania
Macedonia
Bulgaria
Serbia & Montenegro
Bosnia & Herzegovina
Croatia
Slovenia
Hungary
Romania
Slovakia
Ukraine
Poland
Belarus
Lithuania
Latvia
Estonia



Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Eastern Europe by Toposim.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/536546

Toposim Eastern Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Eastern Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.



VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.



Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.



This pack includes terrain mesh for the following countries:

Greece
Albania
Macedonia
Bulgaria
Serbia & Montenegro
Bosnia & Herzegovina
Croatia
Slovenia
Hungary
Romania
Slovakia
Ukraine
Poland
Belarus
Lithuania
Latvia
Estonia



Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Eastern Europe by Toposim.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/536543

Toposim Western Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Western Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.



VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.



Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.



This pack includes terrain mesh for the following countries:

Portuguese Republic
Azores
Madeira
Spain including Balearic Islands
Principality of Andorra
Canary Islands
France
Corsica
Belgium
The Netherlands
Germany
Czech Republic
Switzerland
Austria
Italy including Sicily and Sardinia
Malta
United Kingdom
Isle of Man
Ireland



Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Western Europe by Toposim.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
Microsoft Flight Simulator X: Steam Edition - DTG_Martin


http://store.steampowered.com/app/536543

Toposim Western Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Western Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.



VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.



Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.



This pack includes terrain mesh for the following countries:

Portuguese Republic
Azores
Madeira
Spain including Balearic Islands
Principality of Andorra
Canary Islands
France
Corsica
Belgium
The Netherlands
Germany
Czech Republic
Switzerland
Austria
Italy including Sicily and Sardinia
Malta
United Kingdom
Isle of Man
Ireland



Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Western Europe by Toposim.

Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:

Website: http://www.fsxinsider.com/
Facebook: https://www.facebook.com/fsxinsider
Twitter: https://twitter.com/fsxinsider

Microsoft Flight Simulator X: Steam Edition Team
Dovetail Game
...