Fly through the Grand Canyon and over the iconic Vegas strip in US Cities X: Las Vegas for FSX: Steam Edition. Located in the middle of the Nevada desert, Las Vegas is characterized by low buildings with a concentration of high-rise hotels and casinos along one central strip.
US Cities X: Las Vegas includes more than just the famous downtown area. Other fascinating areas around the city are included such as the majestic Grand Canyon and the mysterious Area 51 where rumours of flying saucers run wild. There is a whole lot to explore in this VFR scenery pack, with all major buildings and landmarks plus all airports and heliports within the scenery area. US Cities X: Las Vegas also includes a scenery density configuration tool accessible via the Steam Tools menu.
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for US Cities X: Las Vegas by Aerosoft.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
Fly through the Grand Canyon and over the iconic Vegas strip in US Cities X: Las Vegas for FSX: Steam Edition. Located in the middle of the Nevada desert, Las Vegas is characterized by low buildings with a concentration of high-rise hotels and casinos along one central strip.
US Cities X: Las Vegas includes more than just the famous downtown area. Other fascinating areas around the city are included such as the majestic Grand Canyon and the mysterious Area 51 where rumours of flying saucers run wild. There is a whole lot to explore in this VFR scenery pack, with all major buildings and landmarks plus all airports and heliports within the scenery area. US Cities X: Las Vegas also includes a scenery density configuration tool accessible via the Steam Tools menu.
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for US Cities X: Las Vegas by Aerosoft.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
Are you ready to make high-speed, low-altitude passes over crowded fields? Get ready to give your joystick a death-grip as you make tight turns just below the critical angle of attack. Compete to be the best duster around in Farm Air, the latest from TakeFlight Interactive.
Put yourself in the boots of a new crop duster pilot. You’ll be challenged to five increasingly difficult scenarios – and you’ll have to perform well if you want to earn the respect of your new co-workers!
You’ll start by taking on a time trial to see if you can dust a field fast enough to get hired. From there, your newly-acquired skills will be put to the test with novel challenges and competition from your fellow pilots. After you’ve proven you’re the best crop duster around, challenge your friends in a multiplayer scenario!
Each scenario can be flown in either Alabeo’s PA-36 Pawnee Brave (also available on Steam) or FSX Steam Edition’s default Maule – your choice.
TakeFlight Interactive is a games studio formed by Aces alumni who are dedicated to bringing interactive mission-based experiences to the world of Flight Simulator X: Steam Edition.
Note: Recommended for more experienced FSX:SE pilots, Farm Air will pit your skills against some exacting, low-altitude flight situations.
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Farm Air by TakeFlight Interactive.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
Are you ready to make high-speed, low-altitude passes over crowded fields? Get ready to give your joystick a death-grip as you make tight turns just below the critical angle of attack. Compete to be the best duster around in Farm Air, the latest from TakeFlight Interactive.
Put yourself in the boots of a new crop duster pilot. You’ll be challenged to five increasingly difficult scenarios – and you’ll have to perform well if you want to earn the respect of your new co-workers!
You’ll start by taking on a time trial to see if you can dust a field fast enough to get hired. From there, your newly-acquired skills will be put to the test with novel challenges and competition from your fellow pilots. After you’ve proven you’re the best crop duster around, challenge your friends in a multiplayer scenario!
Each scenario can be flown in either Alabeo’s PA-36 Pawnee Brave (also available on Steam) or FSX Steam Edition’s default Maule – your choice.
TakeFlight Interactive is a games studio formed by Aces alumni who are dedicated to bringing interactive mission-based experiences to the world of Flight Simulator X: Steam Edition.
Note: Recommended for more experienced FSX:SE pilots, Farm Air will pit your skills against some exacting, low-altitude flight situations.
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Farm Air by TakeFlight Interactive.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
McDonnell Aircraft's F3H Demon™ was the firm's first swept-wing jet fighter. The aircraft was conceived in 1949 as the XF3H-1™, with the first flight taking place in 1951. Unfortunately, the original power plant proved unsatisfactory, though despite this the F3H-1N™ set an unofficial time-to-climb record in 1955 of 10,000 feet in 71 seconds! In 1953, the Demon™ was refitted with the more powerful and reliable Allison J71 engine. This new engine substantially boosted the aircraft’s performance.
In 1956, the F3H-2N Demon™ was approved as a front line fighter with the U.S. Navy. In service, the Demon performed well, although it was still somewhat underpowered. It was a sturdy, stable platform under all flying conditions. The last of 522 Demons were delivered in 1959 and were not retired until 1964.
The FSX: Steam Edition of the McDonnell F3H-2 Demon, developed by Virtavia, is a faithfully replicated aircraft add-on with four different payload versions, various animations, and smoke trail effects. A great addition to any military fleet!
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for the McDonnell F3H-2 Demon™ by Virtavia.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
McDonnell Aircraft's F3H Demon™ was the firm's first swept-wing jet fighter. The aircraft was conceived in 1949 as the XF3H-1™, with the first flight taking place in 1951. Unfortunately, the original power plant proved unsatisfactory, though despite this the F3H-1N™ set an unofficial time-to-climb record in 1955 of 10,000 feet in 71 seconds! In 1953, the Demon™ was refitted with the more powerful and reliable Allison J71 engine. This new engine substantially boosted the aircraft’s performance.
In 1956, the F3H-2N Demon™ was approved as a front line fighter with the U.S. Navy. In service, the Demon performed well, although it was still somewhat underpowered. It was a sturdy, stable platform under all flying conditions. The last of 522 Demons were delivered in 1959 and were not retired until 1964.
The FSX: Steam Edition of the McDonnell F3H-2 Demon, developed by Virtavia, is a faithfully replicated aircraft add-on with four different payload versions, various animations, and smoke trail effects. A great addition to any military fleet!
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for the McDonnell F3H-2 Demon™ by Virtavia.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
Toposim Eastern Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Eastern Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.
VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.
Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.
This pack includes terrain mesh for the following countries:
Greece Albania Macedonia Bulgaria Serbia & Montenegro Bosnia & Herzegovina Croatia Slovenia Hungary Romania Slovakia Ukraine Poland Belarus Lithuania Latvia Estonia
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Eastern Europe by Toposim.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
Toposim Eastern Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Eastern Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.
VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.
Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.
This pack includes terrain mesh for the following countries:
Greece Albania Macedonia Bulgaria Serbia & Montenegro Bosnia & Herzegovina Croatia Slovenia Hungary Romania Slovakia Ukraine Poland Belarus Lithuania Latvia Estonia
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Eastern Europe by Toposim.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
Toposim Western Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Western Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.
VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.
Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.
This pack includes terrain mesh for the following countries:
Portuguese Republic Azores Madeira Spain including Balearic Islands Principality of Andorra Canary Islands France Corsica Belgium The Netherlands Germany Czech Republic Switzerland Austria Italy including Sicily and Sardinia Malta United Kingdom Isle of Man Ireland
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Western Europe by Toposim.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today:
Toposim Western Europe for FSX: Steam Edition provides LOD 11 / 19m Multi-LOD terrain mesh for the whole Western Europe region, improving the accuracy of the default terrain mesh and offering a marked improvement to the landscape profile.
VFR flying over Europe has never been more realistic with lakes, mountains and forests all where they should be.
Please note this pack corrects the default terrain mesh (landclass data) and does not include any textures.
This pack includes terrain mesh for the following countries:
Portuguese Republic Azores Madeira Spain including Balearic Islands Principality of Andorra Canary Islands France Corsica Belgium The Netherlands Germany Czech Republic Switzerland Austria Italy including Sicily and Sardinia Malta United Kingdom Isle of Man Ireland
Want to talk about this add-on or need some support using it? Click here to go to the official discussion thread for Toposim Western Europe by Toposim.
Stay up to date with all the latest FSX: Steam Edition news. Join the FSX:SE community today: