Soak in the sights, sounds and smells of a venerable route with almost 200 years of history, but which still runs both passenger and freight services across the Kentish countryside. With a range of locos and multiple units tearing down the tracks between lovingly rendered, true-to-life stations this is the route for all fans of English rail! The South Eastern Railway was established in 1836 to build a railway line which would link London and the coastal town of Dover, a key port with connections to mainland Europe. The line was sedate, but bustling. Passenger, fruit and hops traffic became a staple of the line between Maidstone and Paddock Wood, and despite opposition from residents, and even the Mayor of the county town, there was little denying that the railway was proving beneficial. So beneficial in fact, that it was decided to extend the line further north, continuing to follow the path of the stunning Medway Valley. One striking feature of the route is that the Medway Valley Line retained its semaphore signalling. It would not be until 2005 that the line was finally brought up to modern standard with colour-light signalling, however some still remain open and can be seen in-game, especially at stations like Cuxton where the level crossing is still hand-operated gates. Today, the line is a community rail service operated by Southeastern. The same service pattern is in effect, and is typically formed of 3-car Class 375/3 Electrostars, although Class 466s are used on occasion, and Class 465s have also been used in years prior. An extra service pattern was trialled in 2011 and is now permanent, Southeastern Highspeed Class 395s operate in the morning and evening peaks to Maidstone West, calling only at Snodland before heading to/from London St Pancras. When brought into Train Simulator, the Medway Valley Line will complement the Chatham Main Line by bringing you a quieter side to Southeastern services while unlocking freight potential across the picturesque countryside. Kent is called “The Garden of England” for a reason – so get out there and see for yourself!
Soak in the sights, sounds and smells of a venerable route with almost 200 years of history, but which still runs both passenger and freight services across the Kentish countryside. With a range of locos and multiple units tearing down the tracks between lovingly rendered, true-to-life stations this is the route for all fans of English rail! The South Eastern Railway was established in 1836 to build a railway line which would link London and the coastal town of Dover, a key port with connections to mainland Europe. The line was sedate, but bustling. Passenger, fruit and hops traffic became a staple of the line between Maidstone and Paddock Wood, and despite opposition from residents, and even the Mayor of the county town, there was little denying that the railway was proving beneficial. So beneficial in fact, that it was decided to extend the line further north, continuing to follow the path of the stunning Medway Valley. One striking feature of the route is that the Medway Valley Line retained its semaphore signalling. It would not be until 2005 that the line was finally brought up to modern standard with colour-light signalling, however some still remain open and can be seen in-game, especially at stations like Cuxton where the level crossing is still hand-operated gates. Today, the line is a community rail service operated by Southeastern. The same service pattern is in effect, and is typically formed of 3-car Class 375/3 Electrostars, although Class 466s are used on occasion, and Class 465s have also been used in years prior. An extra service pattern was trialled in 2011 and is now permanent, Southeastern Highspeed Class 395s operate in the morning and evening peaks to Maidstone West, calling only at Snodland before heading to/from London St Pancras. When brought into Train Simulator, the Medway Valley Line will complement the Chatham Main Line by bringing you a quieter side to Southeastern services while unlocking freight potential across the picturesque countryside. Kent is called “The Garden of England” for a reason – so get out there and see for yourself!
In response to your important feedback on a variety of add-ons available for Train Simulator 2018, we have today released an update for the FEF-3 UP Northern & Overland add-ons
Changelist
This resolves an issue where the whistle on the Advanced versions of the FEF-3 under certain conditions would not turn off after being used.
If you own the FEF-3 UP Northern & Overland, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.
The FEF-3 UP Northern & Overland update will be approximately 120 MB in size.
In response to your important feedback on a variety of add-ons available for Train Simulator 2018, we have today released an update for the FEF-3 UP Northern & Overland add-ons
Changelist
This resolves an issue where the whistle on the Advanced versions of the FEF-3 under certain conditions would not turn off after being used.
If you own the FEF-3 UP Northern & Overland, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.
The FEF-3 UP Northern & Overland update will be approximately 120 MB in size.
Bring powerful locomotives and hefty freight to life with the action-heavy MRCE Dispolok Pack! With a rich history and lots to play with, this pack is the perfect way to freshen up your collection. Following the turn of the 21st Century, a handful of Siemens’ locomotives, which had recently been shipped to their buyers, were returned owing to technical issues found upon entrance into service. While not ideal, Siemens took it in their stride to repair the faults and ensure the locomotives were ready for service proper, and to avoid working at a loss, took full advantage of the European rail transport deregulation. The deregulation would allow the leasing of traction and rolling stock to newly-formed private companies, instead of them having to purchase and maintain such stock outright. It was this that saw Siemens set up “Dispolok”, a locomotive-leasing division that would put their returned traction to profitable use. The project was a success, and soon more locomotives would be built specifically with leasing in mind. Before long however, Siemens, who was retiring from the leasing business, reached an agreement for Mitsui Rail Capital Europe to acquire the brand in 2006. By this point, around 100 locomotives were in the Yellow & Grey Dispolok brand, and MRCE added to that by ordering from Siemens around the time of their acquirement of the brand. Two years later, and the company was renamed to MRCE Dispolok, which saw a new Black livery added to locomotives. The brand was further changed to MRCE GmbH in 2013. Over the years, a multitude of locomotive types have been leased by MRCE/Dispolok to provide operators a reliable choice of traction, that is able to put down as much power required for any duty. The fleet includes Siemens’ very own ES 64 F, F4 and U2 electric locomotives, and their ER20 Eurorunners. Additionally, EMD JT42CWR’s have been a recent popular addition, this locomotive is better known as the EMD Class 66, a Europe-wide favourite with over 650 produced.
Bring powerful locomotives and hefty freight to life with the action-heavy MRCE Dispolok Pack! With a rich history and lots to play with, this pack is the perfect way to freshen up your collection. Following the turn of the 21st Century, a handful of Siemens’ locomotives, which had recently been shipped to their buyers, were returned owing to technical issues found upon entrance into service. While not ideal, Siemens took it in their stride to repair the faults and ensure the locomotives were ready for service proper, and to avoid working at a loss, took full advantage of the European rail transport deregulation. The deregulation would allow the leasing of traction and rolling stock to newly-formed private companies, instead of them having to purchase and maintain such stock outright. It was this that saw Siemens set up “Dispolok”, a locomotive-leasing division that would put their returned traction to profitable use. The project was a success, and soon more locomotives would be built specifically with leasing in mind. Before long however, Siemens, who was retiring from the leasing business, reached an agreement for Mitsui Rail Capital Europe to acquire the brand in 2006. By this point, around 100 locomotives were in the Yellow & Grey Dispolok brand, and MRCE added to that by ordering from Siemens around the time of their acquirement of the brand. Two years later, and the company was renamed to MRCE Dispolok, which saw a new Black livery added to locomotives. The brand was further changed to MRCE GmbH in 2013. Over the years, a multitude of locomotive types have been leased by MRCE/Dispolok to provide operators a reliable choice of traction, that is able to put down as much power required for any duty. The fleet includes Siemens’ very own ES 64 F, F4 and U2 electric locomotives, and their ER20 Eurorunners. Additionally, EMD JT42CWR’s have been a recent popular addition, this locomotive is better known as the EMD Class 66, a Europe-wide favourite with over 650 produced.
Authentically crafted high-speed action awaits you with the striking CRH2A for Train Simulator! Experience an integral part of the Chinese railway network’s modern history with this revolutionary locomotive. To compete with road and air traffic, the railway network of China needed a massive improvement to average journey times. This was done through several rounds of “Speed Up” campaigns, which saw dramatic changes to the infrastructure between 1997 and 2004. The next stage however would be the most radical, the construction of passenger-dedicated high speed links between cities, and of course brand new traction to run upon them. The first of these new lines opened in 2007, and a handful of modern electric multiple units were especially constructed for the job, one of which was the CRH2A. Unlike the state-of-the-art traction introduced nowadays, which is uniquely designed, the first generation of Chinese high-speed EMUs were built to various existing family designs from companies across the world; Bombardier delivered the CRH1, and Alstom the CRH5, however the CRH2, specifically the 2A, was from Kawasaki in Japan and entirely derived from the E2-1000 Series Shinkansen of JR East. The first of the CRH2A EMUs was delivered as early as March 2006 and the fleet would enter service 13 months later. Despite being Shinkansens, only a few train sets were actually constructed in Japan, a handful more were sent in knock-down form as a ‘kit’ for CSR Sifang who would produce the rest of the fleet by means of technology transfer from Kawasaki, Mitsubishi and Hitachi. The initial order of CRH2A EMUs called for 60 sets, however a further 40 would be ordered by 2010, a tell-tale sign of in-service success. Capable of 250 km/h, the 100-strong fleet of 8-car CRH2A EMUs rapidly revolutionised travel in China, and helped lay the foundation of the record-breaking high-speed network which today outmatches all others. While not related to the Shinkansens like the CRH2A, further derivatives such as the ‘2B’ and ‘2C’ would further decrease journey times, and rather importantly, the Shinkansen/CRH2 family was chosen as the basis of the landmark CRH380A.
Authentically crafted high-speed action awaits you with the striking CRH2A for Train Simulator! Experience an integral part of the Chinese railway network’s modern history with this revolutionary locomotive. To compete with road and air traffic, the railway network of China needed a massive improvement to average journey times. This was done through several rounds of “Speed Up” campaigns, which saw dramatic changes to the infrastructure between 1997 and 2004. The next stage however would be the most radical, the construction of passenger-dedicated high speed links between cities, and of course brand new traction to run upon them. The first of these new lines opened in 2007, and a handful of modern electric multiple units were especially constructed for the job, one of which was the CRH2A. Unlike the state-of-the-art traction introduced nowadays, which is uniquely designed, the first generation of Chinese high-speed EMUs were built to various existing family designs from companies across the world; Bombardier delivered the CRH1, and Alstom the CRH5, however the CRH2, specifically the 2A, was from Kawasaki in Japan and entirely derived from the E2-1000 Series Shinkansen of JR East. The first of the CRH2A EMUs was delivered as early as March 2006 and the fleet would enter service 13 months later. Despite being Shinkansens, only a few train sets were actually constructed in Japan, a handful more were sent in knock-down form as a ‘kit’ for CSR Sifang who would produce the rest of the fleet by means of technology transfer from Kawasaki, Mitsubishi and Hitachi. The initial order of CRH2A EMUs called for 60 sets, however a further 40 would be ordered by 2010, a tell-tale sign of in-service success. Capable of 250 km/h, the 100-strong fleet of 8-car CRH2A EMUs rapidly revolutionised travel in China, and helped lay the foundation of the record-breaking high-speed network which today outmatches all others. While not related to the Shinkansens like the CRH2A, further derivatives such as the ‘2B’ and ‘2C’ would further decrease journey times, and rather importantly, the Shinkansen/CRH2 family was chosen as the basis of the landmark CRH380A.
We have today released an update for Train Simulator 2018.
Changelist
Core:
Added Simplified Chinese as a supported language
North Wales Coastal DLC:
Added Simplified Chinese as a supported language
Mittenwaldbahn + DB BR442 DLC:
Added Simplified Chinese as a supported language
Peninsula Corridor DLC
Added Simplified Chinese as a supported language
This update will download automatically from Steam and will be around 1.7GB in size. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.
We have today released an update for Train Simulator 2018.
Changelist
Core:
Added Simplified Chinese as a supported language
North Wales Coastal DLC:
Added Simplified Chinese as a supported language
Mittenwaldbahn + DB BR442 DLC:
Added Simplified Chinese as a supported language
Peninsula Corridor DLC
Added Simplified Chinese as a supported language
This update will download automatically from Steam and will be around 1.7GB in size. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.