Stretching across North and East London, the Gospel Oak to Barking Line – affectionately known as the ‘GOBLIN’ – has grown into a major part of the extensive London Overground network; a network which has specialised in re-vitalising neglected routes throughout the Capital, converting them into railways which are fit to serve a modern-day city. Explore the railways in the north of the Capital with the North London & Goblin Lines Route Add-On for Train Simulator.
The Gospel Oak to Barking Line was formed from an amalgamation of routes built in the 19th Century; the Tottenham and Hampstead Junction Railway, which opened in 1868 and spanned North London from Highgate Road to Tottenham North Junction; and the Tottenham and Forest Gate Railway, which first saw trains in 1894 and connected Tottenham to the existing line at Barking. Various stations have played as the terminus for each end of the line, including St. Pancras, Kentish Town, Moorgate, East Ham, Barking, Tilbury and Southend (the latter two being for specials only), however, the line came to Gospel Oak in 1981, and has stayed between there and Barking since.
Due to the GOBLIN’s route being a very indirect one into and out of London, it was pencilled in for closure under the infamous Beeching Report. By chance, very little of the Capital’s proposed changes took place, and the line itself escaped the axe. Even with the line remaining open, much of it suffered from poor maintenance and reliability would suffer greatly, trains not built to cope with the commuter demand were forcibly in service across the line, and all platform staff soon disappeared. Only one train per hour was operating by 1980, not ideal as an East-to-North connection.
Improvements would start to roll in with privatisation, National Express’ Silverlink introduced newer Class 150 DMUs across the line in 2000, along with CCTV and Information Points, all of which gave a great boost to reliability. It wouldn’t be until Transport for London took over though, that major developments would be seen and brand new, purpose-built rolling stock would arrive. By 2007, the line was operated by London Overground and new services were added at peak hours, weekend & evenings, platform staff were reinstated, the line was included as part of the Oyster Card system and added to the Tube Map.
In 2010, an 8-strong fleet of new Class 172 ‘Turbostar’ DMUs entered service, replacing the Class 150s and providing more comfortable and spacious journeys throughout. Despite this however, even these new Turbostars were not enough to meet capacity demands, and TfL began looking at longer DMUs that could replace them. Before an order was settled however, it was announced that the GOBLIN would be electrified, making diesel obsolete.
Since June 2016, extensive work has started to erect 25kV AC overhead catenary over the GOBLIN. Everything from track lowering, bridge rebuilding, platform lengthening and much more is required to ready the line for new electric services; the line was partially closed until September 2016, and has been fully closed since. Services are set to begin once again in February 2017, and with further evening and weekend works, the GOBLIN will be fully electrified by the end of the year, ready for a fleet of brand new 4-car Class 710 ‘Aventra’ EMUs to take over from the Class 172s in 2018.
The Gospel Oak to Barking Line has had some tough calls in its past, but has risen from strength to strength in recent years, thanks to the projects of London Overground, and is today a major commuter route for those in North & East London that is set to only improve in the future.
The North London & Goblin Lines for Train Simulator is a stunning recreation of the North London Line (between Richmond and Stratford), GOBLIN (between Gospel Oak and Barking) and the West London Line (between Willesden Junction and Clapham Junction), all operated by London Overground Rail Operations Ltd. When combined with the various freight connections and locations, the North London & Goblin Lines easily boasts more than forty-miles-worth of suburban railway to explore.
Stretching across North and East London, the Gospel Oak to Barking Line – affectionately known as the ‘GOBLIN’ – has grown into a major part of the extensive London Overground network; a network which has specialised in re-vitalising neglected routes throughout the Capital, converting them into railways which are fit to serve a modern-day city. Explore the railways in the north of the Capital with the North London & Goblin Lines Route Add-On for Train Simulator.
The Gospel Oak to Barking Line was formed from an amalgamation of routes built in the 19th Century; the Tottenham and Hampstead Junction Railway, which opened in 1868 and spanned North London from Highgate Road to Tottenham North Junction; and the Tottenham and Forest Gate Railway, which first saw trains in 1894 and connected Tottenham to the existing line at Barking. Various stations have played as the terminus for each end of the line, including St. Pancras, Kentish Town, Moorgate, East Ham, Barking, Tilbury and Southend (the latter two being for specials only), however, the line came to Gospel Oak in 1981, and has stayed between there and Barking since.
Due to the GOBLIN’s route being a very indirect one into and out of London, it was pencilled in for closure under the infamous Beeching Report. By chance, very little of the Capital’s proposed changes took place, and the line itself escaped the axe. Even with the line remaining open, much of it suffered from poor maintenance and reliability would suffer greatly, trains not built to cope with the commuter demand were forcibly in service across the line, and all platform staff soon disappeared. Only one train per hour was operating by 1980, not ideal as an East-to-North connection.
Improvements would start to roll in with privatisation, National Express’ Silverlink introduced newer Class 150 DMUs across the line in 2000, along with CCTV and Information Points, all of which gave a great boost to reliability. It wouldn’t be until Transport for London took over though, that major developments would be seen and brand new, purpose-built rolling stock would arrive. By 2007, the line was operated by London Overground and new services were added at peak hours, weekend & evenings, platform staff were reinstated, the line was included as part of the Oyster Card system and added to the Tube Map.
In 2010, an 8-strong fleet of new Class 172 ‘Turbostar’ DMUs entered service, replacing the Class 150s and providing more comfortable and spacious journeys throughout. Despite this however, even these new Turbostars were not enough to meet capacity demands, and TfL began looking at longer DMUs that could replace them. Before an order was settled however, it was announced that the GOBLIN would be electrified, making diesel obsolete.
Since June 2016, extensive work has started to erect 25kV AC overhead catenary over the GOBLIN. Everything from track lowering, bridge rebuilding, platform lengthening and much more is required to ready the line for new electric services; the line was partially closed until September 2016, and has been fully closed since. Services are set to begin once again in February 2017, and with further evening and weekend works, the GOBLIN will be fully electrified by the end of the year, ready for a fleet of brand new 4-car Class 710 ‘Aventra’ EMUs to take over from the Class 172s in 2018.
The Gospel Oak to Barking Line has had some tough calls in its past, but has risen from strength to strength in recent years, thanks to the projects of London Overground, and is today a major commuter route for those in North & East London that is set to only improve in the future.
The North London & Goblin Lines for Train Simulator is a stunning recreation of the North London Line (between Richmond and Stratford), GOBLIN (between Gospel Oak and Barking) and the West London Line (between Willesden Junction and Clapham Junction), all operated by London Overground Rail Operations Ltd. When combined with the various freight connections and locations, the North London & Goblin Lines easily boasts more than forty-miles-worth of suburban railway to explore.
Train Sim World: CSX Heavy Haul is arriving soon on Steam for Windows PC. Feel the detail operating heavy trains over the stunning Sand Patch Grade
In preparation for the exciting release of our latest, next-generation train simulator, Train Sim World: CSX Heavy Haul, we have launched our Coming Soon page on Steam. Head over and add it to your Wishlist and Follow it now so you don’t miss out on a single second when it releases next month!
Train Sim World: CSX Heavy Haul is arriving soon on Steam for Windows PC. Feel the detail operating heavy trains over the stunning Sand Patch Grade
In preparation for the exciting release of our latest, next-generation train simulator, Train Sim World: CSX Heavy Haul, we have launched our Coming Soon page on Steam. Head over and add it to your Wishlist and Follow it now so you don’t miss out on a single second when it releases next month!
Built to revolutionise suburban travel on newly electrified lines in Britain’s capital, the Class 313 was the forerunner of British Rail’s Second Generation production fleet and would start a history that is still being written to this day. And now, the Class 313 arrives in Train Simulator for prominent North London Line service courtesy of Partner Programme developer, Armstrong Powerhouse!
A total of 64 Class 313 EMUs were delivered between 1976 and 1977 and were based at Hornsey TMD for the ECML and Willesden TMD for the North London Line. Built as 3-car units, the Class 313s were an overall improvement to previous rolling stock, upping capacity all while reducing journey times thanks to improved acceleration & braking when compared to First Generation EMUs.
The Class 313s continued their North London duties right up until 2010, having seen sectorisation into Network SouthEast in 1986 and privatisation in 1997, where the units came under National Express’ Silverlink control. After a decade of resplendent Silverlink service, Transport for London began to take over various commuter routes, including the North London Line, to form a modernised network called London Overground.
One major part of the modernisation was introduction of new rolling stock, as a result, the Class 313s never received any major livery changes; units were simply rebranded, a giant purple decal was placed over the Silverlink logo, and basic London Overground wording was affixed to the centre of each driving vehicle – the 313s never saw the classic TfL Roundel applied to them.
In 2009, the introduction of a new fleet, formed of Bombardier’s Class 378 Capitalstars, had begun. Class 313s would regularly be withdrawn from London Overground service, with the last unit forming a West London Line service to Willesden Junction on 13th September, 2010. Despite their age, the Class 313s found a new lease of life shortly after their North London withdrawal; either joining their siblings on the ECML or being moved to Southern for Coastway services out of Brighton.
Armstrong Powerhouse’s fully-featured representation of the Class 313 is now ready for service in Train Simulator; resplendent in ex-Silverlink ‘London Overground’ livery. The Class 313 is the perfect traction to experience yesteryear’s North London services!
Built to revolutionise suburban travel on newly electrified lines in Britain’s capital, the Class 313 was the forerunner of British Rail’s Second Generation production fleet and would start a history that is still being written to this day. And now, the Class 313 arrives in Train Simulator for prominent North London Line service courtesy of Partner Programme developer, Armstrong Powerhouse!
A total of 64 Class 313 EMUs were delivered between 1976 and 1977 and were based at Hornsey TMD for the ECML and Willesden TMD for the North London Line. Built as 3-car units, the Class 313s were an overall improvement to previous rolling stock, upping capacity all while reducing journey times thanks to improved acceleration & braking when compared to First Generation EMUs.
The Class 313s continued their North London duties right up until 2010, having seen sectorisation into Network SouthEast in 1986 and privatisation in 1997, where the units came under National Express’ Silverlink control. After a decade of resplendent Silverlink service, Transport for London began to take over various commuter routes, including the North London Line, to form a modernised network called London Overground.
One major part of the modernisation was introduction of new rolling stock, as a result, the Class 313s never received any major livery changes; units were simply rebranded, a giant purple decal was placed over the Silverlink logo, and basic London Overground wording was affixed to the centre of each driving vehicle – the 313s never saw the classic TfL Roundel applied to them.
In 2009, the introduction of a new fleet, formed of Bombardier’s Class 378 Capitalstars, had begun. Class 313s would regularly be withdrawn from London Overground service, with the last unit forming a West London Line service to Willesden Junction on 13th September, 2010. Despite their age, the Class 313s found a new lease of life shortly after their North London withdrawal; either joining their siblings on the ECML or being moved to Southern for Coastway services out of Brighton.
Armstrong Powerhouse’s fully-featured representation of the Class 313 is now ready for service in Train Simulator; resplendent in ex-Silverlink ‘London Overground’ livery. The Class 313 is the perfect traction to experience yesteryear’s North London services!
In response to your important feedback on a variety of add-ons available for Train Simulator 2017, G-TraX have today released an update for the Sacramento Northern: Suisun Bay – San Francisco Route.
Here is a list of what has been addressed:
Resolved missing texture issues
Improved the rendering of the Interurban rolling stock
Various minor scenery adjustments
Revised dialog formatting in the ‘Walnuts to Market’ scenario
Updated user manual to recommend usage of the Silverlining “3D” weather types in custom scenarios
If you own the Sacramento Northern: Suisun Bay – San Francisco Route, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.
If you do not yet own the Sacramento Northern: Suisun Bay – San Francisco Route, why not pick it up now and experience classic American interurban railroading!
The Sacramento Northern: Suisun Bay – San Francisco Route update will be approximately 309 MB in size.
In response to your important feedback on a variety of add-ons available for Train Simulator 2017, G-TraX have today released an update for the Sacramento Northern: Suisun Bay – San Francisco Route.
Here is a list of what has been addressed:
Resolved missing texture issues
Improved the rendering of the Interurban rolling stock
Various minor scenery adjustments
Revised dialog formatting in the ‘Walnuts to Market’ scenario
Updated user manual to recommend usage of the Silverlining “3D” weather types in custom scenarios
If you own the Sacramento Northern: Suisun Bay – San Francisco Route, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.
If you do not yet own the Sacramento Northern: Suisun Bay – San Francisco Route, why not pick it up now and experience classic American interurban railroading!
The Sacramento Northern: Suisun Bay – San Francisco Route update will be approximately 309 MB in size.
The railway line has carved its way through the Alpine landscape of western Austria for over a century, providing generations with a vital link from Innsbruck, through the mountains and into Germany’s Garmisch-Partenkirchen. Now you can experience the wonder, beauty, and challenging nature of this line, as the scenic Mittenwaldbahn is now available for Train Simulator!
After the first proposals for a railway line between Seefeld and Innsbruck began to appear in the late 1880s, and following many disputes over financing, approval was granted and construction got underway. Seefeld was to be the original terminus, but this was quickly extended to Mittenwald, and eventually to the already existing station of Garmisch-Partenkirchen. While pushing costs even higher, this extension would allow a seamless connection between Munich and Innsbruck.
The line was opened in July 1912; however, it would not be until April of the following year until the planned electrification was complete and in full operation. Most railway lines weren’t built with the wires in mind, however it was decided to construct the Mittenwaldbahn in such a condition to avoid any future work being required; the landscape was difficult to work in, getting everything done at once avoided major developments in the future, despite the initial cost.
The Mittenwaldbahn proved essential to the locals, and saw a significant rise in tourist traffic with various ski resorts being accessible to many, this was particularly the case for the 1976 Winter Olympics and 1985 World Ski Championships. It was round this time when modernisation was undertaken to accommodate, including re-signalling and station re-builds.
Today, the Austrian section of the line (Innsbruck-Scharnitz) is operated as the S5 line of the Tyrol S-Bahn. ÖBB 4020s would have dominated this service back in their heyday, but the more common traction found is the ÖBB 4024 ‘Talent’ EMUs. DB also provide a regular service to Mittenwald from Munich, with occasional trains extending all the way to Innsbruck. The two operators also provide weekly InterCity Expresses, formed of the ICE-T high speed train and stopping at key stations only. Any freight that traverses the route can often be found behind ÖBB’s modern and powerful 2016 ‘Hercules’ locomotives.
The Mittenwaldbahn for Train Simulator features the 58 km route between Garmisch-Partenkirchen Hbf and Innsbruck Hbf, complete with a variety of Career and Railfan Mode Scenarios allowing you to explore this classic and eye-catching route, all while putting your skills to the test!
Both the DB BR 442 in DB Regio livery, and ÖBB 2016 resplendent in the bold ÖBB red, is ready for your remote passenger and heavy freight needs. A selection of freight cars is included for the ÖBB 2016, and the locomotive itself is in clean, weathered and heavily weathered conditions.
The railway line has carved its way through the Alpine landscape of western Austria for over a century, providing generations with a vital link from Innsbruck, through the mountains and into Germany’s Garmisch-Partenkirchen. Now you can experience the wonder, beauty, and challenging nature of this line, as the scenic Mittenwaldbahn is now available for Train Simulator!
After the first proposals for a railway line between Seefeld and Innsbruck began to appear in the late 1880s, and following many disputes over financing, approval was granted and construction got underway. Seefeld was to be the original terminus, but this was quickly extended to Mittenwald, and eventually to the already existing station of Garmisch-Partenkirchen. While pushing costs even higher, this extension would allow a seamless connection between Munich and Innsbruck.
The line was opened in July 1912; however, it would not be until April of the following year until the planned electrification was complete and in full operation. Most railway lines weren’t built with the wires in mind, however it was decided to construct the Mittenwaldbahn in such a condition to avoid any future work being required; the landscape was difficult to work in, getting everything done at once avoided major developments in the future, despite the initial cost.
The Mittenwaldbahn proved essential to the locals, and saw a significant rise in tourist traffic with various ski resorts being accessible to many, this was particularly the case for the 1976 Winter Olympics and 1985 World Ski Championships. It was round this time when modernisation was undertaken to accommodate, including re-signalling and station re-builds.
Today, the Austrian section of the line (Innsbruck-Scharnitz) is operated as the S5 line of the Tyrol S-Bahn. ÖBB 4020s would have dominated this service back in their heyday, but the more common traction found is the ÖBB 4024 ‘Talent’ EMUs. DB also provide a regular service to Mittenwald from Munich, with occasional trains extending all the way to Innsbruck. The two operators also provide weekly InterCity Expresses, formed of the ICE-T high speed train and stopping at key stations only. Any freight that traverses the route can often be found behind ÖBB’s modern and powerful 2016 ‘Hercules’ locomotives.
The Mittenwaldbahn for Train Simulator features the 58 km route between Garmisch-Partenkirchen Hbf and Innsbruck Hbf, complete with a variety of Career and Railfan Mode Scenarios allowing you to explore this classic and eye-catching route, all while putting your skills to the test!
Both the DB BR 442 in DB Regio livery, and ÖBB 2016 resplendent in the bold ÖBB red, is ready for your remote passenger and heavy freight needs. A selection of freight cars is included for the ÖBB 2016, and the locomotive itself is in clean, weathered and heavily weathered conditions.