Train Simulator Classic 2024 - DTG_James
01/09/2017

http://store.steampowered.com/app/621920/Train_Simulator_Western_Hydraulics_Pack_AddOn/

Recount the iconic and distinctive hydraulics in this bumper package for Train Simulator featuring BR Class 35, BR Class 42 and BR Class 52 locomotives as they were in their heyday. This conversion kit for the Riviera Line in the Fifties: Exeter - Kingswear Route Add-On (available as a separate purchase) permits authentic operations on the route to the much-loved transitional diesel era.

Between 1961 and 1964, a total of 101 ‘D7000’ series locomotives were produced for the Western Region of British Railways. The D7000s worked out of Old Oak Common, Cardiff Canton and Bristol Bath Road, and with their 1700hp Bristol-Siddely/Maybach MD870 engines producing a maximum tractive effort of 46,600 lbf, could effectively handle secondary passenger and freight at speeds upwards of 90mph.

Much like most British Railways locomotives, the D7000s started life in BR Green livery, but some were soon seen in BR Blue before the entire fleet was untimely withdrawn from service. Unlike other classes however, the early Green guises were much more elaborate on the D7000s, featuring a Brunswick and light green body, medium grey roof, white window surrounds and on later iterations, yellow warning panels. Although never renumbered, the D7000 fleet was reclassified under TOPS as the BR Class 35, and they were nicknamed the “Hymek”.

Between 1958 and 1964, a total of 38 locomotives were built for express passenger services on BR’s Western Region, numbered in the series of D800 to D832 and from D866 to D870. These were allocated to Old Oak Common, Newton Abbot, Plymouth Laira and Bristol Bath Road, from where they headed trains such as the Cornish Riviera Express and the Bristolian. Unlike the D7000, the locomotives featured two Maybach MD650 engines providing a combined output up to 2270hp, so despite the similar top speed of 90mph, the ‘Warship’ Class 42 (as they would later be known) could haul significantly heavier loads.

Again, these locomotives started life in BR Green, although not as vibrant as the D7000’s variation, however the Western Region soon turned controversial as they adopted maroon as their new standard colour and applied it to the Class 42. By 1966, BR Blue started to appear on the fleet. Whereas the D7000s were not named, each Class 42 was, and all but two were named after Royal Navy vessels, and the fleet was known as the “Warship” diesels. As locomotives were re-liveried post-1968, the ‘D’ prefix was dropped from the number, and despite being reclassified as BR Class 42 under TOPS, this was not reflected in reality.

Between 1961 and 1964, a total of 74 ‘D1000’ series locomotives were constructed to relieve the D800s of the Western Region top-link expresses, for which they were underpowered. When new, the D1000s were allocated to Old Oak Common, Plymouth Laira, Bristol Bath Road, Cardiff Canton and Landore, however as Class 50s, and later the HST took their place, they were all based at Laira. Much like the D800s, the D1000s were fitted with two engines, but the Maybach MD655 was utilised, and a pair of them could produce a staggering 2700hp.

The D1000s were also subject to the likes of BR Maroon and BR Blue, however they were also seen in more unique liveries such as BR Desert Sand a trial in testing for a new standard colour for locomotives of BR. Interestingly, there has been debate over what type of blue was used on some D1000s; early reports stated a ‘chromatic blue’ was used, giving the locos a metallic sheen. Some enthusiasts accept that this is merely an early camera anomaly, and that no such blue was ever implemented. Every D1000 locomotive was named ‘Western…’ and a single word such as ‘Champion’, and so they were known as the “Western” class. Under TOPS, the D1000s became the BR Class 52, but were never renumbered as such before withdrawal.

For Train Simulator, the Western Hydraulic Pack brings the Hymeks, Warships (Class 42 only) and Westerns to life, as they were in operational service. Additionally, multiple liveries are present, and so are nameplates, a lot of nameplates!
Train Simulator Classic 2024 - JayTwoPointOh
01/09/2017

http://store.steampowered.com/app/621920/Train_Simulator_Western_Hydraulics_Pack_AddOn/

Recount the iconic and distinctive hydraulics in this bumper package for Train Simulator featuring BR Class 35, BR Class 42 and BR Class 52 locomotives as they were in their heyday. This conversion kit for the Riviera Line in the Fifties: Exeter - Kingswear Route Add-On (available as a separate purchase) permits authentic operations on the route to the much-loved transitional diesel era.

Between 1961 and 1964, a total of 101 ‘D7000’ series locomotives were produced for the Western Region of British Railways. The D7000s worked out of Old Oak Common, Cardiff Canton and Bristol Bath Road, and with their 1700hp Bristol-Siddely/Maybach MD870 engines producing a maximum tractive effort of 46,600 lbf, could effectively handle secondary passenger and freight at speeds upwards of 90mph.

Much like most British Railways locomotives, the D7000s started life in BR Green livery, but some were soon seen in BR Blue before the entire fleet was untimely withdrawn from service. Unlike other classes however, the early Green guises were much more elaborate on the D7000s, featuring a Brunswick and light green body, medium grey roof, white window surrounds and on later iterations, yellow warning panels. Although never renumbered, the D7000 fleet was reclassified under TOPS as the BR Class 35, and they were nicknamed the “Hymek”.

Between 1958 and 1964, a total of 38 locomotives were built for express passenger services on BR’s Western Region, numbered in the series of D800 to D832 and from D866 to D870. These were allocated to Old Oak Common, Newton Abbot, Plymouth Laira and Bristol Bath Road, from where they headed trains such as the Cornish Riviera Express and the Bristolian. Unlike the D7000, the locomotives featured two Maybach MD650 engines providing a combined output up to 2270hp, so despite the similar top speed of 90mph, the ‘Warship’ Class 42 (as they would later be known) could haul significantly heavier loads.

Again, these locomotives started life in BR Green, although not as vibrant as the D7000’s variation, however the Western Region soon turned controversial as they adopted maroon as their new standard colour and applied it to the Class 42. By 1966, BR Blue started to appear on the fleet. Whereas the D7000s were not named, each Class 42 was, and all but two were named after Royal Navy vessels, and the fleet was known as the “Warship” diesels. As locomotives were re-liveried post-1968, the ‘D’ prefix was dropped from the number, and despite being reclassified as BR Class 42 under TOPS, this was not reflected in reality.

Between 1961 and 1964, a total of 74 ‘D1000’ series locomotives were constructed to relieve the D800s of the Western Region top-link expresses, for which they were underpowered. When new, the D1000s were allocated to Old Oak Common, Plymouth Laira, Bristol Bath Road, Cardiff Canton and Landore, however as Class 50s, and later the HST took their place, they were all based at Laira. Much like the D800s, the D1000s were fitted with two engines, but the Maybach MD655 was utilised, and a pair of them could produce a staggering 2700hp.

The D1000s were also subject to the likes of BR Maroon and BR Blue, however they were also seen in more unique liveries such as BR Desert Sand a trial in testing for a new standard colour for locomotives of BR. Interestingly, there has been debate over what type of blue was used on some D1000s; early reports stated a ‘chromatic blue’ was used, giving the locos a metallic sheen. Some enthusiasts accept that this is merely an early camera anomaly, and that no such blue was ever implemented. Every D1000 locomotive was named ‘Western…’ and a single word such as ‘Champion’, and so they were known as the “Western” class. Under TOPS, the D1000s became the BR Class 52, but were never renumbered as such before withdrawal.

For Train Simulator, the Western Hydraulic Pack brings the Hymeks, Warships (Class 42 only) and Westerns to life, as they were in operational service. Additionally, multiple liveries are present, and so are nameplates, a lot of nameplates!
Train Simulator Classic 2024 - DTG_James
25/08/2017

http://store.steampowered.com/app/562386/Train_Simulator_New_Haven_E33_Loco_AddOn/

Built by General Electric in the 1950s to haul coal for the Virginian Railway, a group of 3,300-horsepower ignitron rectifier electrics were purchased second-hand in 1963 by the New Haven Railroad to haul tonnage between New York City and New Haven, Connecticut. Now, these powerful electrics – designated EF-4s by the NYNH&H – are ready for Train Simulator duty.

The ignitron rectifier electrics (often called GE E-33s) were purchased by the New Haven to restore electric freight operations on the railroad’s New Haven – New York City route. Weighing in at 394,000 and provided 98,500 lbs. of tractive effort, the road-switcher-style electrics were assigned road numbers 300-310 and dressed in a flashy New Haven vermillion, white, and black livery. On the NYNH&H, the six-axle (C-C) GE locomotives assumed virtually all mainline freight operations across the railroad’s electrified territory, working between Cedar Hill Yard in New Haven, Oak Point Yard in the Bronx, and Brooklyn’s Bay Ridge Yard. Although they had been constructed as heavy haulers, the electrics were also capable of quick running, being geared for a 65-mph top speed. By virtually all accounts, the EF-4s served the New Haven well and were a welcomed assignment by the road crews. Following the New Haven’s merger into Penn Central, the electrics served PC and eventually Conrail before being retired in 1981.

Created in extraordinary detail by Partner Programme developer Reppo, the NYNH&H EF-4 for Train Simulator faithfully recaptures the features and operating characteristics of this distinctive electric locomotive. The EF-4 is provided in both “running” and “cold and dark” variations, the latter featuring a realistic, multi-step start-up process. To provide period-appropriate equipment to accompany the EF-4, the pack also includes a 40-foot New Haven boxcar in familiar orange livery, NYNH&H’s classic NE-5 steel cupola caboose, and, for AI use, a New Haven Electro-Motive GP9. And the pack also includes four career scenarios for the NEC: New York – New Haven route which represents much of the ex-New Haven mainline trackage over which the distinctive and iconic rectifier electrics operated.
Train Simulator Classic 2024 - JayTwoPointOh
25/08/2017

http://store.steampowered.com/app/562386/Train_Simulator_New_Haven_E33_Loco_AddOn/

Built by General Electric in the 1950s to haul coal for the Virginian Railway, a group of 3,300-horsepower ignitron rectifier electrics were purchased second-hand in 1963 by the New Haven Railroad to haul tonnage between New York City and New Haven, Connecticut. Now, these powerful electrics – designated EF-4s by the NYNH&H – are ready for Train Simulator duty.

The ignitron rectifier electrics (often called GE E-33s) were purchased by the New Haven to restore electric freight operations on the railroad’s New Haven – New York City route. Weighing in at 394,000 and provided 98,500 lbs. of tractive effort, the road-switcher-style electrics were assigned road numbers 300-310 and dressed in a flashy New Haven vermillion, white, and black livery. On the NYNH&H, the six-axle (C-C) GE locomotives assumed virtually all mainline freight operations across the railroad’s electrified territory, working between Cedar Hill Yard in New Haven, Oak Point Yard in the Bronx, and Brooklyn’s Bay Ridge Yard. Although they had been constructed as heavy haulers, the electrics were also capable of quick running, being geared for a 65-mph top speed. By virtually all accounts, the EF-4s served the New Haven well and were a welcomed assignment by the road crews. Following the New Haven’s merger into Penn Central, the electrics served PC and eventually Conrail before being retired in 1981.

Created in extraordinary detail by Partner Programme developer Reppo, the NYNH&H EF-4 for Train Simulator faithfully recaptures the features and operating characteristics of this distinctive electric locomotive. The EF-4 is provided in both “running” and “cold and dark” variations, the latter featuring a realistic, multi-step start-up process. To provide period-appropriate equipment to accompany the EF-4, the pack also includes a 40-foot New Haven boxcar in familiar orange livery, NYNH&H’s classic NE-5 steel cupola caboose, and, for AI use, a New Haven Electro-Motive GP9. And the pack also includes four career scenarios for the NEC: New York – New Haven route which represents much of the ex-New Haven mainline trackage over which the distinctive and iconic rectifier electrics operated.
Aug 17, 2017
Train Simulator Classic 2024 - DTG_James
17/08/2017

http://store.steampowered.com/app/621870/

Following the success of the incredible Albula Line, Thomson Interactive brings to life the scenic and vital Arosa Line for Train Simulator. Including even more nail-biting grades, a whole new set of unique challenges and a fresh, stunning perspective of the Alpine landscape.



This 25-km long line, which winds its way from Chur, the oldest town in Switzerland, all the way to Arosa, a Summer and Winter tourist resort, opened in December 1914 to both passengers and freight. Surprisingly, the distance between the two towns is less than 14 km, the route however gained its length from a multitude of hairpin turns which helped it climb over the 1,100m that separates the two communities.



Not only hairpins, but the Arosa Line (originally known as the Chur-Arosa-Bahn) features many tunnels and viaducts, including the Langwieser Viaduct, a pioneering reinforced concrete structure that spans the Plessur River with the single-track Arosa Line atop. The site today is of national significance, and in the winter months, Christmas lights are hung from the viaduct so it can be seen for miles after dusk. Given all the twists, turns and structures, it takes about an hour to traverse this breath-taking line.



While a standard route nonetheless, the approach, and of course departure from Chur is most unique. Over 2km of the track outside Chur’s main station runs through the streets of the town itself, this is known as the Chur stadtbahn (town railway), and requires extra vigilance as you share track with road traffic and pedestrians.



With Arosa being a tourist resort all year round, the line sees a lot of passenger traffic, but a significant amount of freight is also transported between the two towns. Mixed trains are a common occurrence on the Swiss railway network, so having to haul a little extra load is to be expected. Uniquely, it is not just locomotives that do the hauling, the local electric multiple units will also carry extra passenger coaches, as well as freight, along this incredible railway.



The latest EMU to be put to work along the Arosa Line is the RhB ABe 8/12 Allegra, this 3-car unit was introduced in 2009 and is designed to handle the steepest grades of the RhB railway network, such as those found between Chur and Arosa. The Allegra offers unmatched views for first class passengers, where windows can provide a driver’s eye view of the mountains, and is easily accessible with a low floored centre coach.



Not only does the Allegra perform as expected, it exceeded all measures in December 2009 when a not-in-service unit set a new metre gauge speed record, clocking in at 139 km/h. A total of 15 Allegra ABe 8/12’s operate in Switzerland, and all of them are named after famed Swiss men, including Friedrich Hennings, chairman of construction for the Albula Line, and Willem Jan Holsboer, a founder of the Rhaetian Railway (RhB).



Thomson Interactive has designed the new Allegra to be compatible with their dynamic pantograph height feature developed for the Albula Line and adopted for the Arosa Line. Cab features include pantograph selection, passenger information display control, traction speed control and a whole host of other dynamic features.
All of this, and more, is yours to experience in Thomson Interactive’s beautiful Arosa Line!
Aug 17, 2017
Train Simulator Classic 2024 - JayTwoPointOh
17/08/2017

http://store.steampowered.com/app/621870/

Following the success of the incredible Albula Line, Thomson Interactive brings to life the scenic and vital Arosa Line for Train Simulator. Including even more nail-biting grades, a whole new set of unique challenges and a fresh, stunning perspective of the Alpine landscape.



This 25-km long line, which winds its way from Chur, the oldest town in Switzerland, all the way to Arosa, a Summer and Winter tourist resort, opened in December 1914 to both passengers and freight. Surprisingly, the distance between the two towns is less than 14 km, the route however gained its length from a multitude of hairpin turns which helped it climb over the 1,100m that separates the two communities.



Not only hairpins, but the Arosa Line (originally known as the Chur-Arosa-Bahn) features many tunnels and viaducts, including the Langwieser Viaduct, a pioneering reinforced concrete structure that spans the Plessur River with the single-track Arosa Line atop. The site today is of national significance, and in the winter months, Christmas lights are hung from the viaduct so it can be seen for miles after dusk. Given all the twists, turns and structures, it takes about an hour to traverse this breath-taking line.



While a standard route nonetheless, the approach, and of course departure from Chur is most unique. Over 2km of the track outside Chur’s main station runs through the streets of the town itself, this is known as the Chur stadtbahn (town railway), and requires extra vigilance as you share track with road traffic and pedestrians.



With Arosa being a tourist resort all year round, the line sees a lot of passenger traffic, but a significant amount of freight is also transported between the two towns. Mixed trains are a common occurrence on the Swiss railway network, so having to haul a little extra load is to be expected. Uniquely, it is not just locomotives that do the hauling, the local electric multiple units will also carry extra passenger coaches, as well as freight, along this incredible railway.



The latest EMU to be put to work along the Arosa Line is the RhB ABe 8/12 Allegra, this 3-car unit was introduced in 2009 and is designed to handle the steepest grades of the RhB railway network, such as those found between Chur and Arosa. The Allegra offers unmatched views for first class passengers, where windows can provide a driver’s eye view of the mountains, and is easily accessible with a low floored centre coach.



Not only does the Allegra perform as expected, it exceeded all measures in December 2009 when a not-in-service unit set a new metre gauge speed record, clocking in at 139 km/h. A total of 15 Allegra ABe 8/12’s operate in Switzerland, and all of them are named after famed Swiss men, including Friedrich Hennings, chairman of construction for the Albula Line, and Willem Jan Holsboer, a founder of the Rhaetian Railway (RhB).



Thomson Interactive has designed the new Allegra to be compatible with their dynamic pantograph height feature developed for the Albula Line and adopted for the Arosa Line. Cab features include pantograph selection, passenger information display control, traction speed control and a whole host of other dynamic features.
All of this, and more, is yours to experience in Thomson Interactive’s beautiful Arosa Line!
Train Simulator Classic 2024 - DTG_James
In response to your important feedback on a variety of add-ons available for Train Simulator 2017, we have today released an update for the BR Class 150/1 DMU.

Here’s a list of what has been addressed:
  • Completely rewritten throttle physics to match prototype
  • Completely reworked brake performance to match prototype
  • Fixed an issue with the headlights
  • Fixed an issue with a number of missing audio assignments
  • Added bonus “Ex-Silverlink” London Overground Livery
If you own the BR Class 150/1, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.

If you do not yet own the BR Class 150/1, why not? It’s perfect for not only Great Western territory, but also now the popular North London and Goblin Lines route! Pick it up and experience classic Sprinter action!

The BR Class 150/1 update will be approximately 130 MB in size.
Train Simulator Classic 2024 - JayTwoPointOh
In response to your important feedback on a variety of add-ons available for Train Simulator 2017, we have today released an update for the BR Class 150/1 DMU.

Here’s a list of what has been addressed:
  • Completely rewritten throttle physics to match prototype
  • Completely reworked brake performance to match prototype
  • Fixed an issue with the headlights
  • Fixed an issue with a number of missing audio assignments
  • Added bonus “Ex-Silverlink” London Overground Livery
If you own the BR Class 150/1, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.

If you do not yet own the BR Class 150/1, why not? It’s perfect for not only Great Western territory, but also now the popular North London and Goblin Lines route! Pick it up and experience classic Sprinter action!

The BR Class 150/1 update will be approximately 130 MB in size.
Train Simulator Classic 2024 - TrainSim-Steve
In response to your important feedback on a variety of add-ons available for Train Simulator 2017, we have today released a patch for the BR Class 150/1 DMU.

Here’s a list of what has been addressed:
  • Completely rewritten throttle physics to match prototype
  • Completely reworked brake performance to match prototype
  • Fixed an issue with the headlights
  • Fixed an issue with a number of missing audio assignments
  • Added bonus “Ex-Silverlink” London Overground Livery
This patch will be approximately 130MB.

If you own the BR Class 150/1, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.
Train Simulator Classic 2024 - TrainSim-Steve
In response to your important feedback on a variety of add-ons available for Train Simulator 2017, we have today released a patch for the BR Class 150/1 DMU.

Here’s a list of what has been addressed:
  • Completely rewritten throttle physics to match prototype
  • Completely reworked brake performance to match prototype
  • Fixed an issue with the headlights
  • Fixed an issue with a number of missing audio assignments
  • Added bonus “Ex-Silverlink” London Overground Livery
This patch will be approximately 130MB.

If you own the BR Class 150/1, the update will download automatically from Steam. If you have any problems/queries with regard to the update, leave a comment below or submit a ticket to our support site where our Support Team will be ready to assist.
...