Dette innholdet krever hovedspillet Train Simulator 2016 i Steam for å kunne spilles.

Brukeranmeldelser:
Overall:
Positive (12 anmeldelser) - 91% av 12 brukeranmeldelser for dette spillet er positive.
Utgivelsesdato: 18. sep, 2013

Logg inn for å legge til denne gjenstanden i ønskelisten din, følge eller markere som ikke interessant

Nedlastbart innhold

Dette innholdet krever hovedspillet Train Simulator 2016 i Steam for å kunne spilles.

Kjøp Train Simulator: Southern Pacific GP20

 

Om dette innholdet

The second generation EMD GP20 ushered in a new era of turbocharged locomotives on American railroads, and now this 2,000hp heavy freight hauler is available for Train Simulator in Southern Pacific livery.

The EMD GP20 was seen as leading the way in a new age of turbocharged diesel locomotives, even though some of EMD’s competitors had been experimenting with higher horsepower models several years earlier. In reality, the GP20 only offered a small increase in horsepower over its predecessor, the GP18, but EMD’s salesmen touted the locomotive’s ability to reduce consist sizes and maintenance costs, and increase speeds to secure sales.

GP20s could be identified ahead of similar GP7, GP9 and GP18 models by an additional small radiator fan ahead of its large aft fan, the prominent bulge behind the cab which housed its turbocharger, and a single large exhaust stack.

Of the 260 models built by General Motors’ Electro-Motive Division between November 1959 and April 1962, Southern Pacific operated 34 locomotives and also took ownership of the four demonstrators originally used by EMD. Many of the locomotives served reliably for more than 30 years but were less promising for rebuild programmes than other GP classes, and most were scrapped. However, some can still be seen on short lines today with two models officially preserved.

The EMD GP20 for Train Simulator, developed by Reppo, is available in Southern Pacific livery and features a highly detailed cab interior with operating switches, advanced and standard driving controls, realistic engine start up procedure, accurately modelled simulation, engine overheating and working unit selector.

The locomotive is also Quick Drive compatible, giving you the freedom to drive the EMD GP20 on any Quick Drive enabled route for Train Simulator, such as those available through Steam. Also included are scenarios specifically for the Donner Pass route (available separately and required to play these scenarios).

Scenarios


Two scenarios for the Donner Pass route:
  • Freshly Frozen Norden Waters
  • Sparks-Reno Shuttle

More scenarios are available on Steam Workshop online and in-game. Train Simulator’s Steam Workshop scenarios are free and easy to download, adding many more hours of exciting gameplay. With scenarios being added daily, why don’t you check it out now!

Click here for Steam Workshop scenarios.

Key Features

  • EMD GP20 in Southern Pacific livery
  • Quick Drive compatible
  • Realistic engine start up procedure
  • Accurately modelled simulation
  • Working unit selector
  • Opening interior switch cabinet
  • Highly detailed cab interior
  • Advanced and standard driving controls
  • Scenarios for the Donner Pass route
  • Download size: 164mb

Systemkrav

    Minimum:
    • OS: Windows® Vista / 7 / 8
    • Processor: 2.8 GHz Core 2 Duo (3.2 GHz Core 2 Duo recommended), AMD Athlon MP (multiprocessor variant or comparable processors)
    • Minne: 2 GB RAM
    • Graphics: 512 MB with Pixel Shader 3.0 (AGP PCIe only)
    • DirectX: Version 9.0c
    • Network: Broadband Internet connection
    • Storage: 6 GB available space
    • Sound Card: Direct X 9.0c compatible
    • Additional Notes: Quicktime Player is required for playing the videos
Customer reviews
Customer Review system updated! Learn more
Overall:
Positive (12 anmeldelser)
Recently Posted
alconutt_69
Publisert: 14. januar
I just purchased the Sp GP20 add-on plus the BN and UP GP20s and i can not figureout how to get the locos moving in STD ADV and ADV running ? ANY ideas. How do i get a full shot of the cab.
 
Helpful? Ja Nei Morsom
Jogurt
Publisert: 13. januar
Consider my review a double recommendation. This addon is that good. From the looks of it you could say "yet another American freight engine". But this one is different in a few significant aspects:
- The sounds are great. I don't know about accuracy, but they just feel adequate for a 100+ ton machinery this loco is.
- Cold start. I can recall a few other loco addons with this feature (e.g. Class 90, GT3 Turbine, Class 57), and GP20's has the most complex one. There are working fuses, circuit breakers and switches all over the cab.
- Temperature management. No joke. Fans may be switched on and off separately. And being too harsh on the engine may make it overheat.
- No notable problems with either the loco or supplied scenarios. I thought it was worth mentioning since Donner Pass hasn't been the best route of choice when it comes to scenario quality.
- Price. It costs the same as most loco DLCs on Steam but offers way more features.
 
Helpful? Ja Nei Morsom
AvidGamer51
Publisert: 27. november, 2015
I just love this little engine! Has a great horn and bell with it to. I like the cold start set up you have to do in order to get it going. If you don't like that, you can always select the standered version in game and get the one that's already started up.
 
Helpful? Ja Nei Morsom
oubaasusa
Publisert: 18. juni, 2015
This is one of the top locomotives available. Along with Smokebox's FEF-3 and Consolidation, and the U36, this is a "must have" item. There's a bit of a learning curve with the advanced version, but you'll be very happy that you bought it. Highly recommended, without reservation.
 
Helpful? Ja Nei Morsom
WilBDow
Publisert: 2. april, 2015
Very realistic sounds, and a incredible P3 air horn. The engine sound when its running, isn't really good though. It has a good start up procedure also. There are also a BN/UP re-paint for this, witch would be very useful for Pacific Northwest routes. Over all, Ill give this a 8.5/10
 
Helpful? Ja Nei Morsom
Kyrah Abattoir
Publisert: 21. desember, 2014
This is higher than average when it comes to TS DLCs the start-up sequence is great, i still need to understand the locomotive coupling system and it has all these little extra simulation aspects.

Definitely recommended.
 
Helpful? Ja Nei Morsom
Thogmar
Publisert: 6. oktober, 2014
Really the best American Diesel in the whole DLC library, because it's the only one with actual operational features for start up and running, along with operational physics and limitations not found in any other locos.

SImply the best for diesel driving that you can get here.
 
Helpful? Ja Nei Morsom
NewYorkerRedneck
Publisert: 6. oktober, 2014
This is one of those engines you just don't see on the simulator. The startup procedure is not that hard to learn how to do and its fun to run small local trains with it. Its fun just to fire it up in free roam and pull a small local train with it from one town to the next. The model is good. Sounds are average. Thumbs up.
 
Helpful? Ja Nei Morsom
09trainman
Publisert: 5. oktober, 2014
I really enjoy the start up procedure, decent challenge, especially when starting cold. :)
 
Helpful? Ja Nei Morsom
UP1988 (Katy)
Publisert: 5. oktober, 2014
I WANT THIS SO MUCH!!!!!!
 
Helpful? Ja Nei Morsom
Most Helpful Reviews  Overall
6 av 6 personer (100%) syntes denne anmeldelsen var hjelpsom
Anbefalt
Publisert: 5. oktober, 2014
I really enjoy the start up procedure, decent challenge, especially when starting cold. :)
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
6 av 7 personer (86%) syntes denne anmeldelsen var hjelpsom
Anbefalt
Publisert: 6. oktober, 2014
Really the best American Diesel in the whole DLC library, because it's the only one with actual operational features for start up and running, along with operational physics and limitations not found in any other locos.

SImply the best for diesel driving that you can get here.
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
4 av 4 personer (100%) syntes denne anmeldelsen var hjelpsom
Anbefalt
Publisert: 2. april, 2015
Very realistic sounds, and a incredible P3 air horn. The engine sound when its running, isn't really good though. It has a good start up procedure also. There are also a BN/UP re-paint for this, witch would be very useful for Pacific Northwest routes. Over all, Ill give this a 8.5/10
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
4 av 4 personer (100%) syntes denne anmeldelsen var hjelpsom
Anbefalt
Publisert: 6. oktober, 2014
This is one of those engines you just don't see on the simulator. The startup procedure is not that hard to learn how to do and its fun to run small local trains with it. Its fun just to fire it up in free roam and pull a small local train with it from one town to the next. The model is good. Sounds are average. Thumbs up.
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
3 av 3 personer (100%) syntes denne anmeldelsen var hjelpsom
Anbefalt
Publisert: 27. november, 2015
I just love this little engine! Has a great horn and bell with it to. I like the cold start set up you have to do in order to get it going. If you don't like that, you can always select the standered version in game and get the one that's already started up.
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
2 av 2 personer (100%) syntes denne anmeldelsen var hjelpsom
Anbefalt
Publisert: 18. juni, 2015
This is one of the top locomotives available. Along with Smokebox's FEF-3 and Consolidation, and the U36, this is a "must have" item. There's a bit of a learning curve with the advanced version, but you'll be very happy that you bought it. Highly recommended, without reservation.
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
6 av 10 personer (60%) syntes denne anmeldelsen var hjelpsom
Anbefalt
Publisert: 21. desember, 2014
This is higher than average when it comes to TS DLCs the start-up sequence is great, i still need to understand the locomotive coupling system and it has all these little extra simulation aspects.

Definitely recommended.
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
0 av 2 personer (0%) syntes denne anmeldelsen var hjelpsom
1 person syntes at denne anmeldelsen var morsom
Anbefalt
Publisert: 5. oktober, 2014
I WANT THIS SO MUCH!!!!!!
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
0 av 2 personer (0%) syntes denne anmeldelsen var hjelpsom
Ikke anbefalt
Publisert: 14. januar
I just purchased the Sp GP20 add-on plus the BN and UP GP20s and i can not figureout how to get the locos moving in STD ADV and ADV running ? ANY ideas. How do i get a full shot of the cab.
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom
Anbefalt
Publisert: 13. januar
Consider my review a double recommendation. This addon is that good. From the looks of it you could say "yet another American freight engine". But this one is different in a few significant aspects:
- The sounds are great. I don't know about accuracy, but they just feel adequate for a 100+ ton machinery this loco is.
- Cold start. I can recall a few other loco addons with this feature (e.g. Class 90, GT3 Turbine, Class 57), and GP20's has the most complex one. There are working fuses, circuit breakers and switches all over the cab.
- Temperature management. No joke. Fans may be switched on and off separately. And being too harsh on the engine may make it overheat.
- No notable problems with either the loco or supplied scenarios. I thought it was worth mentioning since Donner Pass hasn't been the best route of choice when it comes to scenario quality.
- Price. It costs the same as most loco DLCs on Steam but offers way more features.
 
Var denne anmeldelsen til hjelp? Ja Nei Morsom